1. Pambuka
Thank you for choosing the Imetec Eco Ceramic Fan Heater, Model 4033. This appliance is designed to provide efficient and comfortable heating for your indoor spaces. Featuring advanced ceramic technology, it offers rapid heating with reduced energy consumption. Please read this manual carefully before use to ensure safe and optimal operation.
Figure 1: Imetec Eco Ceramic Fan Heater, Model 4033.
2. Informasi Safety
Tansah tindakake pancegahan safety dhasar nalika nggunakake piranti listrik kanggo nyuda resiko geni, kejut listrik, lan ciloko kanggo wong.
- Aja nutupi pemanas supaya ora panas banget.
- Simpen bahan sing gampang kobong saka pemanas.
- Do not use in bathrooms or wet areas.
- Priksa manawa voltage specified on the rating label corresponds to your mains supply voltage.
- Copot piranti nalika ora digunakake utawa sadurunge ngresiki.
3. Fitur Produk
- Teknologi Keramik: Nyedhiyakake pemanasan sing cepet lan efisien.
- Ngirit energi: Reduced energy consumption by up to 40%.
- Versatile Temperature Settings: Offers 3 temperature levels (cool, warm, very warm) for year-round use.
- Anti-Dust Filter: Mbantu njaga kualitas udara.
- Ambient Thermostat: Allows you to select and maintain your desired room temperature.
Konsumsi Energi Suda
3 Tataran Suhu
Filter Anti Debu
Termostat Ambient
4. Setup
- Mbukak kemasan: Carefully remove the fan heater from its packaging. Retain the packaging for future storage or transport.
- Panggonan: Place the heater on a firm, level surface, ensuring it is at least 1 meter (3 feet) away from walls, furniture, and curtains. Do not place it directly under a power socket.
- Sambungan daya: Ensure the heater is switched off (turn the control knob to '0' or 'OFF'). Plug the power cord into a suitable 240V AC electrical outlet.
Figure 2: Ensure proper placement and connection.
5. Instruksi Operasi
The Imetec Eco Ceramic Fan Heater features a control knob for power and temperature settings, and a thermostat knob for ambient temperature control.
Figure 3: Control knob for power and temperature settings.
- Power On/Temperature Selection:
- Turn the main control knob clockwise to select the desired operating mode:
- Fan Only (Cool Air): Kanggo sirkulasi udara tanpa panas.
- Low Heat (Warm Air): For gentle heating, typically 1200W.
- High Heat (Very Warm Air): For rapid and powerful heating, typically 2000W.
- Pangaturan Termostat:
- Once a heat setting is selected, turn the thermostat knob (usually the inner knob) clockwise to increase the desired room temperature.
- Pemanas bakal beroperasi nganti suhu sing disetel tekan, banjur urip lan mati kanthi siklus kanggo njaga suhu kasebut.
- Puter kenop termostat searah jarum jam kanggo nyuda suhu sing dikarepake.
- Daya Mati: Turn the main control knob counter-clockwise to the '0' or 'OFF' position. Unplug the appliance from the power outlet when not in use for extended periods.
Figure 4: The fan heater provides comfortable warmth in various indoor environments.
6. Pangopènan
Pangopènan rutin njamin umur dawa lan operasi pemanas kipas sampeyan sing efisien.
- Reresik njaba:
- Tansah copot pemanas lan kelangan nganti rampung sadurunge ngresiki.
- Ngusap lumahing njaba kanthi alus, damp kain. Aja nggunakake pembersih abrasif utawa pelarut.
- Ensure no water enters the interior of the appliance.
- Cleaning the Anti-Dust Filter:
- The anti-dust filter is located at the rear of the unit.
- Gently remove the filter cover and the filter itself.
- Clean the filter with a soft brush or vacuum cleaner to remove accumulated dust.
- Rinse the filter under running water if necessary, ensuring it is completely dry before reinserting.
- Reattach the filter and cover securely.
- Panyimpenan: Yen nyimpen pemanas kanggo wektu lengkap, ngresiki sak tenane lan nyimpen ing packaging asli ing panggonan kang garing lan kelangan.
Figure 5: Location of the anti-dust filter at the back of the unit.
7. Ngatasi masalah
| Masalah | Kemungkinan Penyebab | Solusi |
|---|---|---|
| Pemanas ora diuripake. | Not plugged in; power switch off; no power at outlet; safety cut-out activated. | Check power cord connection; ensure main control knob is on a heat setting; check household fuse/circuit breaker; unplug, wait 10 minutes, then plug in again. |
| Ora ana panas, mung kipas sing bisa mlaku. | Main control knob set to fan-only mode; thermostat set too low. | Turn main control knob to a heat setting (Low Heat or High Heat); increase thermostat setting. |
| Heater produces unusual noise. | Dust accumulation on fan blades; loose internal component. | Clean the anti-dust filter and fan area (ensure unit is unplugged); if noise persists, contact customer support. |
| Heater smells burnt. | Dust on heating elements; new unit initial burn-off. | Unplug immediately. Clean dust from elements (when cool). If new, a slight smell is normal for first few uses. If smell persists or is strong, discontinue use and contact support. |
8. Spesifikasi
| Merk | Imetec |
| Model | 4033 |
| warna | Putih |
| Voltage | 240 volt |
| Jumlah Kacepetan | 3 |
| Fitur Khusus | Electric, Ceramic Technology, Thermostat |
| Bobot Barang | 1.57 kg |
| Ukuran (L x W x H) | 34.79 x 24.8 x 18.9 cm |
| Faktor wangun | Pedestal |
| Panggunaan njero ruangan / ruangan | njero ruangan |
9. Warranty lan Dhukungan
This Imetec Eco Ceramic Fan Heater, Model 4033, comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions, including warranty duration and coverage details.
For technical support, troubleshooting assistance beyond what is provided in this manual, or warranty claims, please contact Imetec Customer Service. Contact information can typically be found on the official Imetec websitus utawa ing kemasan produk.
Sumber Daya Online: For additional information and support, visit the official Imetec websitus: www.imetec.com
