Juniper NETWORKS CTP151 CTPView Server Software
Product Information
Specifications
- Model / Platform: CTP151
- Existing CTPOS Version: 9.1R1/9.1R2/9.1R3-x/9.1R5/9.1R6-x
- Version Path: 9.1R1/9.1R2/9.1R3-x/9.1R5/9.1R6-x > 9.2R1 dual -> 9.2R2
Product Usage Instructions
Installation
- Install CentOS 7.5.1804 on a VM following the provided link:
CentOS
7.5.1804. - Download the CTPView software file:
- File: CTPView-9.2R-2.0.el7.x86_64.rpm
- Checksum: b26f9d73a5c3
- Download the Web Update file:
- File: web_update_9.2R2_241015.tgz
- Checksum: 4167f5a4e40
Maintenance Policy
CTPView is distributed as an Application only product in the form of an RPM package. Refer to the CTPView Network Management System Administration guide for installation and maintenance procedures.
FAQ
- Q: Can I install newer releases of CentOS?
A: No, you must use CentOS 7.5.1804 for installing CTPView. - Q: Where can I find more information about CVEs and security vulnerabilities?
A: For more information about individual CVEs, visit NVD’s website.
Juniper Networks® CTPView Server Software Release 9.2R2
Published 2024-10-16
RELEASE
About This Guide
This release notes accompany Release 9.2R2 of the CTPView software. They describe device documentation and known problems with the software.
You can also find these release notes on the Juniper Networks CTP software documentation webpage, which is located at CTP Series Release Notes.
Release Highlights
The following features or enhancements have been added to CTPView Release 9.2R2.
- SAToP bundles is now interoperable with Cisco.
- You can now configure Save/Restore CTP configuration feature in CTPView.
- CTPOS Release 9.2R2 is supported on CTP151 device only.
You can upgrade to CTPOS 9.2R2 from CTPOS 9.2R1 using CTPView 9.2R2.
Table 1: CTPOS Upgrade Path
| Model / Platform | Existing CTPOS Version | Version Path |
| CTP151 | 9.1R1/9.1R2/9.1R3-x/
9.1R5/9.1R6-x |
9.1R1/9.1R2/9.1R3-x/
9.1R5/9.1R6-x> 9.2R1 dual -> 9.2R2 |
- Upgrading CTP node to 9.2R2 using CTPView 9.2R2
- First, dual upgrade the CTP Node to 9.2R1.
- Then, to upgrade the CTP node to 9.2R2 using CTPView, copy ctp_complete_9.2R2_241015.tgz in /ctp of CTPView 9.2R2.
- Select Node Maintenance > Upgrade CTP Software.
Resolved Issues in CTPView Release 9.2R2
The following issues have been resolved in CTPView Release 9.2R2.
- SAToP bundles do not interoperate with Cisco [PR 1838126]
- Save/Restore CTP configuration feature is not able configure in CTPView [PR 1841562]
Known Issues in CTPView Release 9.2R2
The following PR is a known issue.
- SSH fails after CTP151 dual upgrade to CTPOS 9.2R1 from CTPView. [PR 1830027]
NOTE: You cannot configure PBS in CTPView 9.2R2.
Required Install files
It is your responsibility to install CentOS on a VM, and the CentOS version must be 7.5.1804 (http://vault.centos.org/7.5.1804/isos/x86_64/).
Installing newer releases of Centos are not supported you must use Centos 7.5.1804. If you have queries or need further assistance, contact Juniper Networks Technical Assistance Center (JTAC).
Following file is provided for installing the CTPView software:
Table 2:
| File | CTPView Server OS | Filename | Checksum |
| Software and Centos OS updates | Centos 7.5 | CTPView-9.2R-2.0.el7.x8 6_64.rpm | 4ef2dc5242a8e2cbe7c63 b26f9d73a5c |
| File | CTPView Server OS | Filename | Checksum |
| Web Update | web_update_9.2R2_2410 15.tgz | 4abbe47e7ad7c496a7f14 4167f5a4e40 |
Recommended System Configuration for Hosting a CTPView Server
The following are the recommended hardware configuration to setup a CTPView 9.2R2 server:
- CentOS 7.5.1804 (64-bit)
- 1x processor (4 cores)
- 4 GB RAM
- Number of NICs – 2
- 80 GB Disk space
CTPView Installation and Maintenance Policy
From the release of CTPView 9.0R1, Juniper Networks has adopted a policy for installation and maintenance of the CTPView server. CTPView is now being distributed as an “Application only” product, in the form of an RPM package. You can now install and maintain the OS (CentOS 7.5) according to the guidelines described in CTPView Network Management System Administration. This administration guide also has the complete installation procedure.
CVEs and Security Vulnerabilities Addressed in CTPView Release 9.2R2
The following tables list the CVEs and security vulnerabilities that have been addressed in CTPView 9.2R2. For more information about individual CVEs, see http://web.nvd.nist.gov/view/vuln/search.
Table 3: Critical or Important CVEs Included in bind
| CVE-2023-3341 | CVE-2023-4408 | CVE-2023-50387 | CVE-2023-50868 |
Table 4: Critical or Important CVEs Included in glibc
| CVE-2024-2961 | CVE-2024-33599 | CVE-2024-33600 | CVE-2024-33601 | CVE-2024-33602 |
Table 5: Critical or Important CVEs Included in grub2
- CVE-2022-2601
Table 6: Critical or Important CVEs Included in kernel
| CVE-2023-3609 | CVE-2023-32233 | CVE-2023-35001 | CVE-2023-42753 |
Table 7: Critical or Important CVEs Included in libssh2
- CVE-2020-22218
Table 8: Critical or Important CVEs Included in linux-firmware
| CVE-2020-12321 | CVE-2023-20569 | CVE-2023-20593 | CVE-2023-20592 |
Table 9: Critical or Important CVEs Included in Postgresql
- CVE-2023-5869
Table 10: Critical or Important CVEs Included in python
- CVE-2023-40217
Table 11: Critical or Important CVEs Included in openssh
| CVE-2023-48795 | CVE-2023-51384 | CVE-2023-51385 |
Revision History
October 2024—Revision 1—CTPView Release 9.2R2
Juniper Networks, the Juniper Networks logo, Juniper, and Junos are registered trademarks of Juniper Networks, Inc. in the United States and other countries. All other trademarks, service marks, registered marks, or registered service marks are the property of their respective owners. Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right to change, modify, transfer, or otherwise revise this publication without notice. Copyright © 2024 Juniper Networks, Inc. All rights reserved.
Documents / Resources
 |
Juniper NETWORKS CTP151 CTPView Server Software [pdf] User Guide CTP151, CTP151 CTPView Server Software, CTPView Server Software, Server Software, Software |
