JTS NX Series Instrument Microphone Kit

JTS-NX2

Sepcification

• Type: Dynamic (moving coil)
• Frequency Response: 20 to 12,000Hz (see Figure 7)
• Polar Pattern: Cardioid, rotationally symmetrical about microphone axis uniform with frequency (see Figure 8)
• Output Level (at 1,000Hz):
  • Open circuit voltage: -85dB* (0.056mV) *OdB=1V/ μ bar
• Impedance: Rated impedance is 600Ω for connection to microphone inputs rated low Z
• Phasing: Positive pressure on the diaphragm produces a Positive voltage on pin 2 with respect to pin 3
• Connector: Three-pin professional audio connector (male XLR type)
• Case: Metallic enamel-painted diecast metal with hardened › matte-finished steel grille
• Adjustable Locking Mount: (see Figure 1 ~ Figure 6)
• Net Weight: 815 grams (28.75 oz)

JTS-NX6

Sepcification

• Type: Dynamic (moving coil)
• Frequency Response: 60 to 16,000Hz (see Figure 9)
• Polar Pattern: Supercardioid, rotationally symmetrical about microphone axis › uniform with frequency (see Fiqure 10)
• Output Level (at 1,000Hz):
  • Open circuit voltage: -72dB* (0.25mv) *OdB=1V/ μ bar
• Impedance: Rated impedance is 600Ω for connection to microphone inputs rated low Z
• Phasing: Positive pressure on the diaphragm produces Positive voltage on pin 2 with respect to pin 3
• Connector: Three-pin professional audio connector (male XLR type)
• Case: Metallic enamel-painted die-cast metal with hardened › matte-finished steel grill
• Adjustable Locking Mount: (see Figure 1 ~ Figure 6)
• Net Weight: 610 grams (21.51 oz)
• Touch Noise: Super low

JTS-NX7,JTS-NX8

Sepcification

• Type: Dynamic (moving coil)
• Frequency Response: 50 to 16,500Hz (see Figure 11 ` 12)
• Polar Pattern: Cardioid, rotationally symmetrical about microphone axis uniform with frequency (see Figure 13 ` 14)
• Output Level (at 1,000Hz):
  • Open circuit voltage: -72dB* (0.25mv) *OdB=1V/ μ bar
• Impedance: Rated impedance is 600μ for connection to microphone inputs rated low Z
• Phasing: Positive pressure on diaphragm produces Positive voltage on pin 2 with respect to pin 3
• Connector: Three-pin professional audio connector (male XLR type)
• Case: Metallic enamel-painted die cast metal with hardned › matte-finished steel grille
• Net Weight:
  • NX-7 235 grams (8.3 oz)
  • NX-8 245 grams (8.6 oz)
• Touch Noise: Super low

Specification and user’s guide of JTS NX-series performance microphones.

Application

• JTS NX-2 Kick Drum, Guitar & Bass Acoustic Bass.
• JTS NX-6 Tom-Toms, Snare Drum, Guitar & Bass Amplifiers, Brass & wood winds, Conga, Saxophone.
• JTS NX-7 Tom-Toms, Snare Drum, Guitar & Bass Amplifiers, Conga Brass & wood winds, Saxophone, Acoustic Guitar.
• JTS NX-8 Performance vocal.

Microphone placement:

Tom-Toms	Snare Drum	Kick Drum	Guitar & Bass Amplifiers	Brass	Wood Winds	Electronic Bass Amplifier
1~3in (2.5~7.5cm)	1~3in (2.5~7.5cm)	2~10in (5~25cm)	2~10in (5~25cm)	1~3ft (30~100cm)	1~5in (2.5~12.5cm)	1~5in (2.5~12.5cm)

NOTE

1. When using a handheld microphone, please always hold the microphone body. Holding the grille might cause howling
2. The miking effect will vary according to the distance between sound source and the microphone. (proximity effect)
3. When using a vocal microphone the optimal distance between mouth and a microphone is between 2.5~15cm (1~6 inches).
4. Miking is a technique and an art Always try to find your favorable miking method.

Documents / Resources

JTS NX Series Instrument Microphone Kit [pdf] Instruction Manual NX-2, NX-6, NX-7, NX-8, NX Series Instrument Microphone Kit, NX Series, Instrument Microphone Kit, Microphone Kit

References

• User Manual