Js ideas S100 Bluetooth Speaker
Specifications
- Product Name: SPEVDUTQFDJpDBUJPO
- Model Number: 1SFTTUPBOTXFSIBOHVQ
- Colour: Black
- Material: Plastic
Product Usage Instructions
- Long press for 3 seconds: Power on/off
- Incoming call: Press to answer/hang up
- In the playing state: Press to play/pause
- Wireless status: the pairing status indicator blinks quickly, and after the pairing is successful, the indicator blinks slowly or is steady on
- Charging state: the indicator light is steady on or blinking when charging, and the indicator light is off when charging is completed
- Before use, please read the instructions on the product packaging (carton or label) carefully (see the detailed operation method of the product).
- If not used for a long time, please fully power off and save
Power On/Off:
To power on the device, press and hold the power button for 3 seconds. To power off, repeat the same process.
Charging:
Connect the device to a power source using the provided cable. The LED indicator will show the charging status.
Functionality:
Use the control buttons to navigate through different modes and settings. Refer to the user manual for detailed instructions on each function.
FCC STATEMENT
Caution:
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
FAQ
Q: How do I reset the device?
A: To reset the device, locate the reset button on the back and press it for 5 seconds.
Q: Can I use the device while charging?
A: Yes, you can use the device while it is charging. However, it is recommended to let it fully charge before extended use.
Q: How do I clean the product?
A: Wipe the product with a soft, damp cloth. Avoid using harsh chemicals or solvents.
Documents / Resources
 |
Js ideas S100 Bluetooth Speaker [pdf] User Guide 2BOL5-S100, 2BOL5S100, S100 Bluetooth Speaker, S100, Bluetooth Speaker, Speaker |