jONSBO TK-1 Micro ATX Mini Tower Computer
Package Content
Connectors
The connector diagram only shows the line sequence relationship. Please refer to the actual product for functions.
Parts Diagram
Installation Guide
- Before hardware installation, please remove the top cover and side panel.
- Push the aluminum top cover backward to release.
- Remove four mounting screws to release aluminum right side panel.
- Remove external cover
Place the motherboard in the area shown in the figure and secure with screws. - Graphics card Installation
- Remove the PCI-E bracket.
- Insert the graphics card into the motherboard slot, and secure with screw.
- Fan/ radiator
Top 120mm x 2 fan or 240 radiator, bottom 120mm x 2 fan. - PSU Installation
- Remove the PSU bracket and install the PSU
- Install the PSU with bracket back to the chassis.
- HDD Installation
- Remove the HDD bracket, Install the HDD to the bracket.
- Install the HDD with bracket back to the chassis.
- SSD installation
- Remove the HDD bracket, install the SSD t the bracket with screws and rubber grommets.
- Insert the HDD to the bracket to the corresponding slots, push in to secure.
- Install the HDD bracket back to the chassis. and secure with screws.
- Top cover and side panel installation
Install the aluminum top cover and aluminum right-side panel. - Glass panel installation
- Place the glass panel to the corresponding place, and secure it with screws.
Dongguan Sibositong Industrial Co., Ltd.
No.5, Xinglong Lu, Sanzhong Village, Qingxi Town, Dongguan City, Guangdong Province, 523651, China
© 2023 Dongguan Sibositong Industrial Co., Ltd. All rights reserved. Specifications are subject to change without prior notice. Some trademarks may be claimed as the property of others.
Documents / Resources
 |
jONSBO TK-1 Micro ATX Mini Tower Computer [pdf] User Manual TK-1 Micro ATX Mini Tower Computer, TK-1, Micro ATX Mini Tower Computer, ATX Mini Tower Computer, Mini Tower Computer, Tower Computer, Computer |
