GOPIE T07 Portable Mini Tower Computer Chassis

PRODUCT INFORMATION

Thank you once again for purchasing our product. If you have any comments or questions,please send us an email, and we will get back to you within 24 hours.

1. Top/Bottom/Front Dust Filter (Dust Prevention)
2. PC Case Handle (AL alloy)
3. Left Side Glass Panel
4. PC Case Feet

Case Components

Hardware List

Disassembling Steps

1. Unscrew the four screws on the left side glass panel
2. Remove the left side glass panel
3. Remove PSU holder

Assembling Steps

1. Install top/front/bottom dust filter
2. Install case handle
3. Install case feet
4. Install bottom fans (Reverse Blade Fans)
5. Install top fans ( or water-cooling)
6. Install rear fan
7. Install the motherboard, then install the graphics Card, then install the PCI slot cover
8. Install PSU onto the PSU holder, then mount the PSU holder
9. Install left-side glass panel

Port Description

• USB 3.1
• Power switch port

HD Installation

1. HOD Installation Location (Support up to 2.5″ HOD *5)
2. HOD Mounting Holes (HOD Mounting Holes *10 in the bottom of the pc case)

Congratulations, you have completed the setup of your computer case

Support and Service

If you have any further questions or encounter any issues while using the product, please feel free to contact us at 19928724105@163.com. When contacting us, please provide detailed information about the problem.

Documents / Resources

GOPIE T07 Portable Mini Tower Computer Chassis [pdf] Installation Guide T07, T07 Portable Mini Tower Computer Chassis, Portable Mini Tower Computer Chassis, Mini Tower Computer Chassis, Tower Computer Chassis, Computer Chassis, Chassis

References

• User Manual