Joker 1 Rectangular Mirrors Instructions

Joker 1 Rectangular Mirrors Instructions

MIRROR INSTALLATION

For technical support contact Joker Machine

2245 Kiowa Blvd N. Ste. 100, Lake Havasu City, AZ 86403 PHONE: 909-596-9690, FAX: 909-596-9693
sales@jokermachine.com, www.jokermachine.com

TOOLS NEEDED

• 1/4” Hex Allen Tool
•  3/4” Open-End Wrench
• Blue Loctite

1. Mock-up mirror to desired location.
2. Install 5/16-24 mounting bolt with 1/4” hex tool using blue Loctite on threads
   There’s a hidden spacer that could fall out when performing the next step.
3. Remove mirror head and apply blue Loctite to Swivel Hex Nut. Thread mirror head back onto swivel hex nut with your hands.
4. Make any final adjustments to mirror and tighten the swivel hex nut with a 3/4” open-end wrench.
   

Read More About This Manual & Download PDF: