JCLOUD AE103 Scent Marketing Diffuser User Manual

JCLOUD AE103 Scent Marketing Diffuser

Important Safety Instructions

Please read and follow these instructions before use.

• Use this diffuser only for its intended purpose as described in this manual.
• Keep the diffuser upright during installation, operation, and storage.
• Place or install the diffuser on a stable, level, and secure surface.
• Keep the diffuser away from children, pets, heat sources, fire, and flammable materials.
• Do not block the mist outlet while the diffuser is operating.
• Do not use water, carrier oil, corrosive liquids, flammable liquids, explosive liquids, or unsafe solvents in the bottle.
• Use fragrance oil suitable for cold-air nebulizing diffusers.
• Do not immerse the diffuser, adapter, plug, or power cord in water.
• Do not use a damaged adapter, plug, or power cord.
• Do not modify, disassemble, or repair the diffuser unless instructed by qualified service personnel.
• Disconnect power before cleaning, refilling, relocating, or storing the diffuser.

Specifications

Product Overview

• The AE103/103-APP diffuser supports app-based schedule setting, grade adjustment, password change, and basic troubleshooting through the Scent Marketing app.

Components & Parts

• Atomized head
• Grade button
• Reset button
• Oil bottle
• Plug
• Indicator

Knowing Your Diffuser

Intermittent Diffusion

• The diffuser does not spray continuously. It releases fragrance for a set number of seconds, then pauses for a set number of seconds. Higher grades usually create stronger fragrance output and use oil faster.

Scent Fatigue

• After long exposure to the same fragrance, the scent may feel weaker even when the diffuser is working normally.
• This is called scent fatigue. Change fragrance periodically, reduce intensity for a while, or improve ventilation to refresh the scent experience.

Oil Consumption

• Oil usage depends on fragrance viscosity, room temperature, airflow, working schedule, and selected grade. Factory consumption data is a reference value, not an exact guarantee for every oil.

Getting Started

1. Place the diffuser upright.
2. Fill the bottle with suitable fragrance oil.
3. Install the oil bottle securely.
4. Connect power.
5. Open the app and set the working period and grade.

Using Your Diffuser

App Control

1. Search Scent Marketing in Google Play or the App Store.
2. Turn on Bluetooth and location permission.
3. Select the diffuser from the app.
4. Enter the password.
5. Set the working period and concentration grade.
6. Save the settings.

Reset

• Short-press reset to restore the original password 8888. Long-press reset until a sound is heard to restore factory settings.

Maintenance & Storage

Clean the diffuser when changing fragrance oil, when mist output becomes weak, or after long use.

1. Turn off and unplug the diffuser.
2. Remove the fragrance oil bottle.
3. Fill a clean bottle with industrial alcohol.
4. Install the alcohol bottle and run the diffuser for 5 to 10 minutes.
5. Turn off the diffuser and remove the alcohol bottle.
6. Let all parts dry fully before adding fragrance oil again.

For long-term storage, clean the diffuser, dry all parts, roll up the power cord, and store the unit in a shaded, ventilated place.

Troubleshooting