JBL QUANTUM 910 Wireless Headset User Guide

JBL QUANTUM 910 Wireless Headset

Specifications

• Platform Compatibility: Windows 10 (64-bit) / Windows 11
• Software Requirements: 500MB of free hard drive space for installation
• Connectivity: 3.5mm Audio Cable, Stereo, 2.4GHz Wireless, Bluetooth
• System Compatibility: PC, Xbox, PlayStation, Nintendo Switch, Mobile, MAC

Product Usage Instructions

Overview

• The JBL Quantum 910 Wireless headset comes with various features.
• Active Noise Cancelling (ANC) / TalkThru LED and button
• Game audio-chat balance dial
• Volume control
• Detachable Windshield foam
• Microphone mute/unmute functionality
• Charging LED
• 3.5mm Audio Jack
• USB-C port
• Voice Focus Boom Microphone
• Spatial sound / Head tracking control
• Power on/off and Bluetooth pairing slider
• RGB Lighting Zones
• Flat-fold ear cup design

Calibration Microphone

To calibrate the microphone, go to JBL’s website for detailed setup instructions.

Power On & Connect

• For 2.4GHz Wireless: Connect the USB Type-C dongle to your PC, MAC, Laptop, PS5, or Nintendo Switch.
• For Manual Pairing: Use the USB Type-A dongle for PC, MAC, PlayStation, or Nintendo Switch.

Bluetooth Connectivity

• Access Bluetooth settings on your device and select JBL Quantum910 for pairing.

Setup

Follow the setup instructions based on your device: Xbox, PlayStation, Nintendo Switch, Mobile, or MAC.

Button Commands

Various button commands are available for controlling features like ANC, TalkThru, volume adjustments, and microphone settings.

First Time Setup

1. Connect the headset wirelessly to your PC using the 2.4GHz USB wireless connection.
2. Access Sound Settings and Set Default Devices for Game and Chat audio.

INTRODUCTION

JBL QuantumENGINE

• DOWNLOAD JBL QUANTUMENGINE TO GAIN FULL ACCESS TO FEATURES ON YOUR JBL QUANTUM HEADSETS – FROM HEADSET CALIBRATION TO ADJUSTING 3D AUDIO.
• TO SUIT YOUR HEARING, FROM CREATING CUSTOMIZED RGB LIGHTING EFFECTS TO DETERMINING HOW THE BOOM MICROPHONE SIDE-TONE WORKS. JBLQUANTUM.COM/ENGINE

SOFTWARE REQUIREMENTS

• PLATFORM: WINDOWS 10 (64 BIT ONLY) / WINDOWS 11 500MB OF FREE HARD DRIVE SPACE FOR INSTALLATION
• ALWAYS USE THE LATEST VERSION OF WINDOWS 10 (64 BIT) OR WINDOWS 11 FOR THE MOST OPTIMAL EXPERIENCE ON JBL QUANTUMENGINE
• JBL QUANTUMSPHERE 360 AND DTS HEADPHONE: X V2.0
• AVAILABLE ON WINDOWS ONLY. SOFTWARE INSTALLATION REQUIRED.
• JBL QUANTUMSPATIAL 360
• AILABLE ON PLAYSTATION (PS4/PS5) AND NINTENDO SWITCH

WHAT’S IN THE BOX

Requirements

JBL QuantumENGINE SOFTWARE REQUIREMENTS

PLATFORM: WINDOWS 10 (64 BIT ONLY) / WINDOWS 11 500MB OF FREE HARD DRIVE SPACE FOR INSTALLATION

SYSTEM COMPATIBILITY

• PC
  • ХВОХ™
• PLAYSTATION™
  • NINTENDO SWITCH™
• MOBILE
  • MAC

OVERVIEW

1. ANC / TALKTHRU LED
2. ANC / TALKTHRU button
3. Game audio-chat balance dial
4. Volume Control
5. Detachable Windshield foam
6. Notification LED for mic mute / unmute
7. Microphone Mute / unMute
8. CHARGING LED
9. 3.5 mm Audio Jack
10. USB-C port
11.  Voice Focus Boom Microphone
12. SPATIAL SOUND / HEAD TRACKING CONTROL
13. Power on / off and Bluetooth pairing slider
14. POWER / 2.4GHz/ Bluetooth LED
15. RGB Lighting Zones
16. Flat-fold ear cup
17. 2.4GHz PAIRING BUTTON
18. Volume Control
19. MIC MUTE BUTTON

Calibration microphone

POWER ON & CONNECT

Bluetooth

SETUP

BUTTON COMMAND

First time setup

• 9a Connect the headset to your PC via a 2.4GHz USB wireless connection.
• 9b Go to “Sound Settings” -> “Sound Control Panel”.
• 9c* Under “Playback” highlight “JBL QUANTUM910 WIRELESS GAME” and select “Set Default” -> “Default Device”.
• 9d Highlight “JBL QUANTUM910 WIRELESS CHAT” and select “Set Default” -> “Default Communication Device”.
• 9e Under “Recording” highlight “JBL QUANTUM910 WIRELESS CHAT” and select “Set Default” -> “Default Device”.
• 9f In your chat application, select “JBL QUANTUM910 WIRELESS  CHAT” as the default audio device.
• 9G Follow the onscreen instructions to personalize your sound settings.
• If you have not installed JBL QuantumEngine, ensure to complete this step before enabling JBL QuantumSPATIAL 360

MICROPHONE

CHARGING

LED BEHAVIOURS

TECH SPEC

• Model: JBL QUANTUM910WIRELESS
• Driver size: 50 mm Dynamic drivers
• Frequency response (Passive): 20 Hz – 40 kHz
• Frequency response (Active): 20 Hz – 20 kHz
• Microphone frequency response: 100 Hz – 8 kHz
• Max input power: 30 mW
• Sensitivity: 111 dB SPL / 1 mW
• Maximum SPL: 93 dB
• Microphone sensitivity: -38 dBV / Pa @1 kHz
• Impedance: 32 ohms
• 2.4GHz Wireless transmitter power: <10 dBm (EIRP)
• 2.4GHz Wireless modulation: GFSK, π/4 DQPSK
• 2.4GHz Wireless carrier frequency: 2400 MHz – 2483.5 MHz
• Bluetooth transmitted power: <13 dBm (EIRP)
• Bluetooth transmitted modulation: GFSK, π/4 DQPSK
• Bluetooth frequency: 2400 MHz – 2483.5 MHz
• Bluetooth profile version: A2DP v1.3, HFP v1.8
• Bluetooth version: BT Core v5.2
• Battery type: Li-ion battery (3.7 V / 1300 mAh)
• Power supply: 5 V 2 A
• Charging time: 3.5 hrs
• Music play time with BT+2.4GHz on and
• ANC+RGB lighting off: 34 hrs
• Talk time with BT+2.4GHz on and ANC+RGB
• lighting off: 38 hrs
• Music play time with only 2.4GHz on and
• ANC+RGB lighting off: 39 hrs
• Talk time with only 2.4GHz on and ANC+RGB
• lighting off: 44 hrs
• Music play time with only BT on and ANC+RGB
• lighting off: 45 hrs
• Talk time with only BT on and ANC+RGB
• lighting off: 47 hrs
• Microphone pickup pattern: Unidirectional
• Weight: 420 g

License

• The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by HARMAN International Industries, Incorporated is under license.
• Other trademarks and trade names are those of their respective owners.
• This product is approved by Anatel, under the regulated procedures for assessing the conformity of telecommunications products, and meets the applicable technical requirements.
• For more information, visit the Anatel website – www.anatel.gov.br.
• This equipment is not entitled to protection against harmful interference and cannot cause interference in duly authorized systems.
• Attention: according to Brazilian law no. 11,291, prolonged exposure to noise above 85 dB may cause damage to the hearing system.
• The power delivered by the charger must be between 2.5 Watts required by the radio equipment, and 10 Watts to achieve the maximum charging speed.
• WARNING: DO NOT ATTEMPT TO OPEN, SERVICE, OR DISASSEMBLE THE BATTERY.
• DO NOT SHORT CIRCUIT | MAY EXPLODE IF DISPOSED OF IN FIRE. RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
• DISPOSE OF OR RECYCLE USED BATTERIES ACCORDING TO THE INSTRUCTIONS

Frequently Asked Questions

• Q: Can I use the JBL Quantum 910 Wireless headset with mobile devices?
  • A: Yes, the headset is compatible with mobile devices. Ensure Bluetooth connectivity for mobile usage.
• Q: How do I adjust the RGB lighting effects on the headset?
  • A: Download JBL QuantumENGINE software for access to features like customizing RGB lighting effects.
• Q: Is the JBL QuantumSPATIAL 360 feature available on all platforms?
  • A: JBL QuantumSPATIAL 360 is available on PlayStation (PS4/PS5) and Nintendo Switch platforms.