Home › JBL › JBL QUANTUM 100 Headset User Guide

JBL QUANTUM 100 Headset User Guide

JBL QUANTUM 100 Quick Start Guide

WHAT’S IN THE BOX

OVERVIEW

Volume Control
Microphone Mute/unMute
2.5mm jack for boom microphone
Flat-fold ear cup

SETUP

MICROPHONE

TECH SPEC

Driver size: 40 mm Dynamic drivers
Frequency response: 20 Hz – 20 kHz
Max input power: 20 mW
Sensitivity: 96 dB @ 1 kHz / 1 mW
Impedance: 32 ohm
Microphone frequency response: 100 Hz – 10 KHz
Microphone sensitivity: -42 dBV @ 1 kHz / Pa
Microphone pickup pattern: Directional
Microphone type: Detachable boom
Cable length: 1.2 m
Weight: 220 g

Documents / Resources

QUANTUM 100 Headset

User Guide · QUANTUM 100 Headset

References

User Manualmanual.tools

Published: August 19, 2021

Updated: August 22, 2021

Questions and answers

Helpful product questions tied to this manual. Each item links to the full Q&A page.

Browse all questions about this manual

Questions & Answers

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

leo says:

August 24, 2021 at 11:42 am

Hello, there! I received my JBL Harman gaming headphones a week ago, and they are excellent headphones for gaming. The sound quality is excellent, as is the spatial aspect. Footsteps are audible, and gunshots are unobtrusive. I was able to get them at a 36 percent discount by using a Harman deal that I found on Saveplus. Take a chance.

Reply
Mordechai Levi says:

August 21, 2022 at 5:03 am
can’t get mine to work, pissed
Mordechai Levi asks can't get mine to work, pissed

Manuals+ clarified question

Question

How do I troubleshoot my JBL Quantum 100 headset if it is not working?
Answer

If your JBL Quantum 100 headset is not working, please check the following basic setup and hardware steps based on the user guide:

Check the Connection: Ensure the 3.5mm audio jack is firmly plugged into your device (PC, Xbox, PlayStation, Nintendo Switch, Mobile, Mac, or VR).

Volume Control: Locate the volume dial on the left ear cup (labeled 01 in the manual) and ensure it is turned up.

Microphone Mute: If the issue is with the microphone, check the mute/unmute slider on the left ear cup (labeled 02). Ensure it is not set to the mute position.

Microphone Attachment: Ensure the removable boom microphone is fully inserted into the 2.5mm jack on the headset (labeled 03).

Device Settings: On your PC or console, verify that the audio output and input settings are set to the headset rather than the built-in speakers.

If you are still experiencing issues, please clarify if you are having trouble with the sound, the microphone, or both so we can provide more specific guidance.
Read the full Q&A page
Reply