CSHM10
DYNAMIC VOCAL MICROPHONE
USER GUIDE
For more information or support,
call 1800 208 8880 or|
write to indiaprocarefaharnnan.com
FOLLOW US
harmanproindiaofficial
Harman Professional India
harmanproindia
harmanproindia
harmanproindia
All product images shown are for illustration purpose only and may not be an exact representation of the product. The actual product may vary in color, size, and finishing. © 2020 HARMAN International Industries Inc. All rights reserved.
BOX INCLUDES
- Handheld vocal microphone
CONNECTING THE MICROPHONE
- The microphone provides a balanced output on a 3-pin male XLR connector.
- You can connect the microphone either to a balanced or unbalanced microphone input.
- To connect the microphone to a balanced input (XLR connector), use a commercial XLR
- To connect the microphone to an unbalanced microphone input (1/4″ jack), use a cable with a female XLR connector and a 1/4″ TS jack Please note that unbalanced cables may pick up interference from stray magnetic fields near power or lighting cables, electric motors, etc. like an antenna. This may cause a hum or similar noise when you use a cable that is longer than 16 feet (5 m).
SWITCHING THE MIC ON/OFF
- To switch the microphone ON, slide the ON/OFF switch toward the front grill ION position).
- To switch the microphone OFF, slide the ON/OFF switch toward the microphone cable (OFF position).
- To prevent unwanted bursts of noise, be sure to switch the microphone OFF before connecting or disconnecting the microphone cable.
CLEANING
- Use a soft cloth moistened with water to clean the surface of the microphone body.
- Internal windscreen
- Unscrew the front grill from the microphone CCW.
- Remove the windscreen from the grill and wash the windscreen in soap suds.
- Allow the windscreen to dry overnight.
- Replace the windscreen in the front grill and screw the front grill on the microphone CW.
FEATURES
- Rugged body
- Dynamic super-cardioid capsule
- ON/OFF switch
- Lightweight
SPECIFICATION
- Polar pattern: Supercardioid
- Frequency range: 80-15000 Hz
| Polar pattern | Supercardioid |
| Audio frequency bandwidth | 80 – 15000 Hz |
| Sensitivity | -55dB ±3dB (OdB=1V/Pa at 1KHz1 |
| Max. sound pressure level | 124 dB |
| Electrical impedance | 6000hms ± 30°/011kHz1 |
| Length | 180 mm |
| Diameter | 51 mm |
Documents / Resources
 |
JBL CSHM10 Dynamic Vocal Microphone [pdf] User Guide CSHM10, Dynamic Vocal Microphone |
