FOTING マニュアルとユーザーガイド

フォティング is a dedicated manufacturer of reliable water management and outdoor cleaning equipment designed for residential, commercial, and agricultural use. With a strong focus on durability, performance, and user convenience, the brand offers a diverse lineup of submersible water pumps, automatic sump pumps, sand filter pumps for above-ground pools, and high-powered electric pressure washers.

FOTING products are engineered using corrosion-resistant thermoplastic materials and robust, oil-free motors suited to handle demanding tasks like emptying flooded basements, draining pools, and tackling stubborn outdoor grime. By integrating practical safety and operation features such as adjustable float switches, thermal overload protection, and energy-efficient designs, FOTING equips homeowners with the tools they need to easily manage water systems and maintain their properties efficiently.

• Why is my FOTING pump running but not discharging water?

  This is often caused by an air lock in the pump or discharge line. Unplug the pump, briefly tilt it while completely submerged to release any trapped air, and plug it back in. Also, check for clogs in the intake screen or impeller.

• How do I use my FOTING sump pump in manual mode?

  To run the pump continuously, secure the float switch in the 'up' position using the handle bracket. Monitor the pump carefully and unplug it before the water runs completely out to prevent dry running and motor damage.

• What does it mean if my FOTING equipment suddenly shuts off?

  The built-in thermal overload protection may have activated to prevent motor damage due to overheating or dry running. Unplug the device and allow the motor to cool down for at least 30 minutes before trying to use it again.

• How should I store my FOTING water pump during winter?

  Always store the pump in a dry, frost-free location to prevent damage caused by freezing temperatures. Before storing, flush the pump with clean water and drain all remaining water from the hoses and unit.