USB DISPLAY ADAPTER
QUICK INSTALLATION GUIDE
JUA210/JUA230/JUA250
GETTING STARTED – Windows
1. Insert the Driver CD into the drive; the setup program should launch automatically.
- Make sure that the USB Display Adapter is NOT connected to your host computer.
* Driver download is available at www.j5create.com in” support>download” area.
2. Executing the Setup.exe application will launch the following screen. Click “Next” to continue.
3. When the installation is complete, select “Yes, I want to restart my computer now” and click “Finish” to restart.
Installation – MAC
1. Insert the Driver CD into the CD-ROM drive and the installation page will be launched.
- Make sure that the USB Display Adapter is NOT connected to your host computer.
* Driver download is available at www.j5create.com in “support >download” area.
2. Click “Continue” to proceed
3. Type your password then click “OK”. It will take few minutes to process.
4. Click “Restart” to complete
DEVICE HARDWARE INSTALLATION
- After the computer has rebooted, connect the external display device to the VGA/DVI/HDMI connector of the USB Display Adapter.
- Connect the USB Display Adapter into a USB port on the host computer.
- Software processing will take a few minutes. After the software processing is complete you will be ready to use the USB Display Adapter.
* Multi-USB Display Adapter Installation
If you are going to install more USB Display Adapters, please repeat the hardware installation and then reboot the computer.
Display Orientation
Turn the connected display device
* This function is not available on MAC
Extended mode
Mirror mode
Primary mode
Display Setting on Windows 7
Right click on the desktop and go to “Screen Resolution”
Display Setting on Windows XP
Right click on the icon (
) on the lower right-hand side of the toolbar
Display Setting on MAC.
Go to (
) and then “System Preferences”.
Choose the “Display” or “Arrangement” tab to adjust.
For complete instructions on Functions please refer to the User Manual.
Required Environment
- Microsoft Windows 7, vista, XP(32-bit or 64-bit)
- Mac OS X v10.6 (Snow Leopard) / v10.7 (Lion)
- Available USB 2.0 port
|
QTY |
1~2 dongles |
3~4 dongles |
|
CPU |
Intel Dual Core 1.8 GHz | Intel Quad core 2.4 GHz |
| RAM | 2 GB |
4 GB |
|
USB |
Independent power supply was required when using the USB HUB to connect multiple dongles. | |
- This device is prioritized for `Office Application’ not for `Home Entertainment’.
- Regulatory Compliance : FCC / CE / C-Tick / VCCI
STOP !!
If you have any issues using this product, please try the instructions below before returning this product to the store.
1. The User Manual
Contains detailed instructions and a troubleshooting section, many common issues can be easily resolved by reading the user manual.
2. Online Support
Please visit the j5 create website (www.j5create.com) to find the latest software for your device. If you still experience issues, you can submit a trouble ticket through j5 web support. Your ticket will be handled within 24 hours. We stand behind our products and it is our goal to provide you world class support.
3. Telephone Support
Please call us @ 888-689-4088 and one of our support technicians will be very happy to assist you.
TECHNICAL SUPPORT
Toll free number: 888-689-4088
Business Hours: Mon. - Fri. 10:00 a.m - 6:00 p.m E.S.T
Email: service@j5create.com
Disclaimer
Information in this document is subject to change without notice.
Documents / Resources
 |
j5create JUA210 USB Display Adapter [pdf] Instruction Manual JUA210 USB Display Adapter, JUA210, USB Display Adapter, Display Adapter, Adapter |
 |
j5create JUA210 USB Display Adapter [pdf] Installation Guide JUA210 USB Display Adapter, JUA210, USB Display Adapter, Display Adapter, Adapter |
