“
Specifications
- Input voltage: 5-24VDC
- Output voltage: 5-24VDC
- Output current: 4CH, 1A/CH
- Output power: 4x(5-24)W
- PWM Frequency: 2000Hz
- Dimming curve: Logarithmic
- Warranty: 5 years
- Protection: Reverse polarity, Over-heat
- Control distance: 30m (Barrier-free
space) - Dimming gray scale: 4096 levels
- Dimming range: 1-100%
- Operation temperature: Ta: -25°C to +55°C
- Case temperature (Max.): Tc: +85°C
- IP rating: IP20
Product Usage Instructions
Mechanical Structures and Installations
Connect the LED strip to the LED output. Make sure to connect
V+, G, R, B, and W wires correctly. Connect the power adapter to
the DC IN port.
- Short press: Turn on or off the light.
- Double click: Switch between RGB, white light,
and RGB+W modes. - Long press (1-6s): Adjust brightness, color,
or white brightness. Long press again after each release to adjust
in the opposite direction.
V4-PD Match RF Remote Controller (Use Power Restart)
To match a remote controller:
- Switch off the power, then switch it on again.
- Repeat the power cycle.
- Immediately short press the on/off key (single zone remote) or
zone key (multiple zone remote) three times on the remote.
The light blinking three times indicates successful matching.
V4-PD Used As RF Remote Controller
The V4-PD can be matched with one or more RF RGBW LED
controllers/RF dimming drivers for remote control of other fixtures
via one-button operation. For synchronized control, multiple V4-PD
controllers can be matched together. Choose the suitable
match/delete method as needed.
Frequently Asked Questions (FAQ)
How many dynamic modes are built into the controller?
The controller has built-in 10 dynamic modes, including jump or
gradual change styles.
What is the warranty period for this product?
The product comes with a 5-year warranty against manufacturing
defects.
What is the operating temperature range of the controller?
The operating temperature ranges from -25°C to +55°C.
“`
V4-PD One-Button RF RGBW LED Controller
Use to control the RGBW LED strip. One button for on/off, RGB color and white lightbrightness adjustment. 4096 levels dimming smoothly without any flash. Operate with LED indicator light. Built in 10 dynamic mode, include jump or gradual change style. Match with RF 2.4G single zone or multiple zone RGBW remote control. Used as RF remote control to output RF 2.4G signal,
remote control of other RF RGBW controllers or RF dimming drivers.
RF RGBW
Technical Parameters
Input and Output
Input voltage
5-24VDC
Output voltage
5-24VDC
Output current Output power
4CH,1A/CH 4x(5-24)W
PWM Frequency Dimming curve
2000Hz Logarithmic
Warranty and Protection
Warranty
5 years
Protection
Reverse polarity, Over-heat
Dimming data Input signal
One botton+ RF 2.4GHz
Control distance 30m(Barrier-free space)
Dimming gray scale 4096 levels
Dimming range
1- 100%
Environment
Operation temperature
Ta: -25 OC ~ +55 OC
Case temperature (Max.) Tc: +85 OC
IP rating
IP20
Safety and EMC
EMC standard
EN IEC 55015 EN IEC 61547 ETSI EN 301 489-1/-3
Safety standard
EN 61347-1/-2
Radio equipment ETSI EN 300 440
Certication
CERoHS
Package Size Gross weight
110x57x28mm(LxWxH) 0.048kg
Mechanical Structures and Installations
LED output (Connecting the LED strip)
LED indicator Button
V+ G R B W
1 2 3 45
LED OUT V+ G R B W
V4-PD
RF RGBW LED Controller Uin = 5-24VDC Uout = 5-24VDC Iout = 4CH, 1A/CH Pout = 4x(5-24)W Temp Range: -25~+55
x1 : ON / OFF x2
: RGB – W – RGB+W 1-6s : Dimming
DC IN
70.00 mm
34.50 mm
15.00 mm
Power input (Connect the power adapter)
Inside diameter 2.1mm Outside diameter 5.5mm
User Manual Ver 1.0.1 2025.7
(back)
Wiring Diagram
Power Supply 5-24VDC
+
G R B
RGBWLED strip
W
Button Function
Brightness adjust
RGB coloradjust
Double click W brightness adjust
W brightness adjust
Long press
Long press
Double click
Double click
Long press Double click
Long press
RGB 5s timeout
W
RGB+W
Short press:Turn on or off light.
Double click:Switch the three working modes of color (RGB), white light (W), color + white light (RGB+W, RGB and white light are on at the same time). At the same time and the state of long press to adjust the color (RGB) or adjust the brightness of white light state (W and RGB + W mode). After 5s of no operation, it will automatically return to the state of long press to adjust brightness.
Long press(1-6s):Adjust the brightness, color or white brightness, long press again after each release, adjust in the opposite direction. Adjust the brightness by default.
V4-PD Match RF Remote Controller (UsePowerRestart)
Match: Switch off the power, then switch on power, repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 3 times on the remote. The light blinks 3 times means match is successful.
Delete: Switch off the power, then switch on power, repeat again. Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted.
V4-PD Used As RF Remote Controller
The V4-PD can be matched with one or more RF RGBW LED controllers/RF dimming drivers to remotely control other fixtures via one-button operation. For example, two V4-PD controllers match with each other for synchronized control. End user can choose the suitable match/delete ways.
Use the controller’s Match key Match: Short press the controller/power supply’s match key, immediately press the button. The LED indicator fast flash a few times means match is successful.
Use Power Restart
Match: Switch off the power of the controller, then switch on power, repeat again. Immediately short press the button 3 times. The light blinks 3 times means match is successful.
Delete: Press and hold the controller/power supply’s match key 5s, The LED indicator fast flash a few times means all matched remotes were deleted.
Delete: Switch off the power of the controller, then switch on power, repeat again. Immediately short press the button 5 times. The light blinks 5 times means all matched remotes were deleted.
Page 1-2
Dynamic Mode List(RF remote control call-out only)
No.
Name
1
RGB jump
2
RGB smooth
3
6 color jump
No.
Name
6
RGB fade in and out
7
Red fade in and out
8
Green fade in and out
4
6 color smooth
9
5
Yellow cyan purple smooth
10
Blue fade in and out White fade in and out
PWM duty(%)
Dimming Curve
100
Gamma=1.6
90 80 70 60 50 40 30 20 10
10 20 30 40 50 60 70 80 90 100
Brightness(%)
User Manual Ver 1.0.1 2025.7
Page 3-4
Documents / Resources
 |
iSkyDance V4-PD One-Button RF RGBW LED Controller [pdf] Instruction Manual V4-PD, V4-PD One-Button RF RGBW LED Controller, One-Button RF RGBW LED Controller, RF RGBW LED Controller, RGBW LED Controller, LED Controller |