V4-PD One-Button RF RGBW LED Controller

Product Overview

The V4-PD is a one-button RF RGBW LED controller designed to manage RGBW LED strips. It offers seamless dimming with 4096 levels, eliminating flash. The controller features an LED indicator and supports 10 dynamic modes, including jump and gradual change styles. It is compatible with RF 2.4G single or multiple zone RGBW remote controls and can also function as an RF remote to control other RF RGBW controllers or dimming drivers.

Technical Parameters

Parameter	Input and Output	Dimming data	Safety and EMC	Warranty and Protection	Environment	Package
Input voltage	5-24VDC	RGB	Input signal: One button + RF 2.4GHz	Warranty: 5 years	Operation temperature: -25°C ~ +55°C	Size: 110x57x28mm (LxWxH)
Output voltage	5-24VDC	W	Control distance: 30m (Barrier-free space)	Protection: Reverse polarity, Over-heat	Case temperature (Max.): Tc: +85°C	Gross weight: 0.048kg
Output current	4CH, 1A/CH	RGB+W	EMC standard: EN IEC 55015, EN IEC 61547, ETSI EN 301 489-1/-3	IP rating: IP20
Output power	4x(5-24)W	Dimming gray scale: 4096 levels	Safety standard: EN 61347-1/-2
PWM Frequency	2000Hz	Dimming range: 1-100%	Radio equipment Certification: ETSI EN 300 440, CE ROHS
Dimming curve	Logarithmic

Wiring Diagram

The wiring diagram shows the connections for the LED output and power input. The LED output connects to the RGBW LED strip, with terminals for V+, GRBW. The power input connects to a power adapter with a 2.1mm inside diameter and 5.5mm outside diameter.

Button Function

Short press: Turn the light on or off.
Double click: Switch between three working modes: RGB color mode, White light mode (W), and Color + White light mode (RGB+W, where RGB and white light are on simultaneously).
Long press (1-6s): Adjust brightness, color, or white brightness. Releasing and long-pressing again reverses the adjustment direction. By default, it adjusts brightness.
Note: After 5 seconds of inactivity, the controller automatically returns to the brightness adjustment state during a long press.

V4-PD Match RF Remote Controller (Use Power Restart)

Match Procedure:

Switch off the power, then switch on again. Repeat this process.
Immediately short press the ON/OFF button (for single zone remotes) or the zone button (for multiple zone remotes) three times on the remote control.
The LED indicator will blink three times, indicating a successful match.

Delete Procedure:

Switch off the power, then switch on again. Repeat this process.
Immediately short press the ON/OFF button (for single zone remotes) or the zone button (for multiple zone remotes) five times on the remote control.
The LED indicator will blink five times, indicating that all matched remotes have been deleted.

V4-PD Used As RF Remote Controller

The V4-PD can be paired with one or more RF RGBW LED controllers or RF dimming drivers to enable remote control of other fixtures using its single-button operation. For instance, two V4-PD controllers can be matched for synchronized control.

Match Procedure (Using Controller's Match Key):

Short press the match key on the V4-PD controller or its power supply.
Immediately press the button on the remote control.
The LED indicator on the V4-PD will flash rapidly several times, confirming a successful match.

Delete Procedure (Using Controller's Match Key):

Press and hold the match key on the V4-PD controller or its power supply for 5 seconds.
The LED indicator on the V4-PD will flash rapidly several times, confirming that all matched remotes have been deleted.

Match Procedure (Using Power Restart):

Switch off the power of the V4-PD controller, then switch it on again. Repeat this process.
Immediately short press the button on the V4-PD controller three times.
The LED indicator will blink three times, confirming a successful match.

Delete Procedure (Using Power Restart):

Switch off the power of the V4-PD controller, then switch it on again. Repeat this process.
Immediately short press the button on the V4-PD controller five times.
The LED indicator will blink five times, confirming that all matched remotes have been deleted.

Dynamic Mode List (RF remote control call-out only)

No.	Name	No.	Name
1	RGB jump	6	RGB fade in and out
2	RGB smooth	7	Red fade in and out
3	6 color jump	8	Green fade in and out
4	6 color smooth	9	Blue fade in and out
5	Yellow cyan purple smooth	10	White fade in and out

Dimming Curve

The dimming curve illustrates the relationship between the PWM duty cycle and the perceived brightness. The graph shows that as brightness increases linearly from 0% to 100%, the PWM duty cycle also increases. The curve is labeled with 'PWM duty (%)' on the y-axis and 'Brightness (%)' on the x-axis, with a gamma value of 1.6 indicated.