iSearching iTAG Tracker User Manual
http://www.qrtransfer.com/iSearching.html
https://play.google.com/store/apps/details?id=com.lenzetech.isearchingtwo
https://itunes.apple.com/cn/app/isearching/id
Apple,APP Store,iPhone,iPad and iPod touch are trademarks of Apple Inc.
Google play is a trademark of Google Inc. All other trademarks used herein are the property of their respective owners.
This manual is designed to help you fully understand how to use the product for your benefit.
GETTING STARTED
Launch the app on your smartphone. Take a moment to check the tutorial page, and don’t forget to tap ‘Allow’ to turn app’s notifications on.
Location History: When you park your car, simply press the tracker’s button to mark your current location on the map. To locate your vehicle, just tap ‘Location History’.
Lost History: In case you misplace your tracker, find it effortlessly in the ‘Lost History.’ A pin will be dropped automatically on the map, providing you with the tracker’s location. Just tap ‘Lost History’ to access the record.
BATTERY REPLACEMENT
Battery type: CR2032
The CR2032 is a common type of standard size battery, making it easier to purchase and replace.
To replace the battery, simply open the tracker’s button serving as the battery cover
FCC Warning Statement: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Documents / Resources
 | iTAG Tracker |
References
- User Manualmanual.tools
khó cài đặt
How do I set up and install the iSearching iTAG Tracker?
Setting up the iSearching iTAG Tracker involves a few simple steps. Please follow this guide to get started:
If you continue to have trouble, ensure the CR2032 battery is fresh and properly installed by opening the button cover.
Read the full Q&A page
Não tem recurso de apagar histórico localização no aplicativo ISearching V.2.7.0
How can I delete the location history in the iSearching app version 2.7.0?
Based on the iSearching iTAG Tracker manual, there is no specific instruction provided for deleting or clearing the Location History or Lost History records within the app interface. The manual only describes how to access these records by tapping the respective buttons.
If you are trying to remove a specific device's history, you may try to delete the device itself from the app by sliding the device name to the left in the device list. Please note that this may remove all settings associated with that specific tracker. If the app version 2.7.0 does not provide a direct 'clear' or 'delete' button within the History menus, the data may be stored locally; clearing the app cache or data in your smartphone's system settings might remove the history, but use caution as this will also log you out and reset your paired devices.
Read the full Q&A page
Hi, I was looking to use these on my pets, however it appears that you have to push the button to lock the location in? If my pet gets out and runs away and its out of Bluetooth range then how do I find it? it looks like this is more of a place holder than a tracking tool. Please advise.
Thank you
Thank you
How does the iSearching iTAG tracker work if my pet goes out of Bluetooth range?
The iSearching iTAG is a Bluetooth-based tracker with a range of approximately 25 meters (75 feet). It does not have built-in GPS for real-time long-distance tracking. However, it offers two features to help if your pet goes out of range:
As you noted, the manual mentions pressing the button to mark a location (Location History), but this is a manual feature typically used for parking. For a lost pet, the 'Lost History' pin is dropped automatically at the point of disconnection. Please be aware that if the pet continues to move after the Bluetooth connection is lost, the app will only show where they were when the signal dropped, not their current live position.
Read the full Q&A page
Weird how they say you can call or use their dogital chat that never tells you anything useful, but they dont give you an option to call. My drop down menu never comes up. What a waste of money
How do I access the drop-down menu to add devices in the iSearching app?
According to the iSearching iTAG Tracker User Manual, the drop-down menu is located in the top-left corner of the app's main screen. If the menu is not appearing, please try the following steps:
If the interface remains unresponsive, try restarting the app or your smartphone to refresh the display elements.
Read the full Q&A page