Searching Kindelf Bluetooth Tracker
overview
This is a Bluetooth wireless tracker that uses your phone’s app to help you find lost items. Within the effective Bluetooth range, you can make the tracker beep, trigger a phone alert from the tracker button, and use it to capture photos.
Specifications
| Connectivity | Bluetooth 5.0 |
|---|---|
| Operating system requirements | iOS 11.0+; Android 8.0+ |
| Effective Bluetooth range | About 25 m / 75 ft (no barriers) |
| Battery type | CR2032 coin cell |
Quick Setup & Use
- Power on: Hold the tracker’s function button for at least 3 seconds until you hear two beeps.
- Power on your smartphone and open the iSearching or Kindelf app.
- Review the tutorial page and select Allow for app notifications.
- In the app, tap the indicated area or pull down to add devices, then tap Connect to pair.
- To locate the item, tap Find Device (or press the tracker button when connected) to make the tracker beep; tap Cancel to stop beeping.
- To trigger your phone from the tracker, double-click the tracker button (press 2 times quickly). Tap Confirm on your phone to stop the alert.
- Optional: In app settings, toggle the alarm button to ON to use the Anti-Lost Alarm feature
PRODUCT INTRODUCTION
This product is a Bluetooth wireless device running the ‘isearching’ or ‘kindelf’ application. Before using it, you need to place the product together with items that are easily lost. Within the effective Bluetooth connection range (About 25 meters / 75 feet with no barriers), you can make the product beep to find your belongings using your phone’s app. You can also double-click the product’s button to make your phone ring, or use the product to capture photos.
With these features, you can easily find items such as keys, bags, remote controls, wallets, and mobile phones.
When the product is out of range of your phone’s Bluetooth connection, an alert will trigger on both the product and your phone, and the last lost location will be marked on the map in the app. To use this feature, you must enable the Phone Alarm While Lost function in the settings.
Device Requirements:
- Bluetooth 5.0
- iOS 11.0 and higher, Android 8.0 and higher
APP DOWNLOAD AND INSTALL
You can download and install the compatible applications via the following methods:
- Download the iSearching or Kindelf app from the App Store.
- Download the iSearching or Kindelf app from Google Play.
Tap the indicated area or pull down the interface to add devices.
- Tap Connect to connect your device.
- Tap Find Device to make the tracker beep.
- Tap Cancel to stop the beeping.
When your tracker is connected and within range, you can use it to locate your lost phone. Press the tracker button 2 times in quick succession to trigger an alert on your phone. Tap Confirm on your phone to stop the alert.
- Tap Settings to customize your tracker.
- Slide the device entry to the left to delete the device.
You can edit the device name (e.g., Wallet, Key, Dog) and take a photo to save as a reference visual icon.
Note: To use the Anti-Lost Alarm feature, you must toggle the alarm button to the ON position.
Select service options: 1. Selfie or 2. Location
Location
- Location History: When you park your vehicle, press the button on the tracker to mark your current location on the map. Tap Location History in the app later to find your parked vehicle.
- Lost History: If you misplace your tracker-attached item, you can find its last known position in Lost History. A pin-drop is marked automatically on the map to show where the connection was last active.
BATTERY REPLACEMENT
Battery Type: CR2032
The CR2032 is a standard coin cell battery that is widely available. To replace, open the outer case from the bottom notch of the device and swap the battery inside.
- Positive (+) Side Up:
- Negative (-) Side Down:
- Toggle Do Not Disturb on to temporarily deactivate the alarm function for all connected devices.
- Access the audio section to adjust alarm settings, voice recording features, or to view saved voice records.
Troubleshooting
- No alert when pressing the tracker: Ensure the tracker is connected and within Bluetooth range, then press the tracker button twice in quick succession to trigger the phone alert. If needed, open the app and tap Find Device to test the beep.
- Anti-Lost/phone-lost alert not working: Confirm that you enabled the app setting Phone Alarm While Lost. Also toggle the alarm button to the ON position for the Anti-Lost Alarm feature.
- Can’t see last lost location updates: The manual notes that when the tracker is out of range, an alert triggers on both the product and your phone and the last lost location is marked on the map in the app—verify the required setting (Phone Alarm While Lost) is enabled.
Documents / Resources
 | Kindelf Bluetooth Tracker |
References
- qrtransfer.com/iSearching.htmlwww.qrtransfer.com
- qrtransfer.com/kindelf.htmlwww.qrtransfer.com
- User Manualmanual.tools