IQUNIX - logo0680 SERIES
MECHANICAL KEYBOARDS

OG80 Wireless Mechanical Keyboard

We recommend that you read this manual thoroughly before using the product.
Start Reading→

IQUNIX OG80 Wireless Mechanical Keyboard - icon 1 LED Indicator Status Description

The indicator is located between IQUNIX OG80 Wireless Mechanical Keyboard - icon 2 and IQUNIX OG80 Wireless Mechanical Keyboard - icon 3

IQUNIX OG80 Wireless Mechanical Keyboard - icon 4
Red Light
Blinking
IQUNIX OG80 Wireless Mechanical Keyboard - icon 5
Blue Light
Blinking / Flashing
IQUNIX OG80 Wireless Mechanical Keyboard - icon 6
Turquoise Light
Blinking / Flashing
IQUNIX OG80 Wireless Mechanical Keyboard - icon 7
Yellow Light
Blinking / Flashing
IQUNIX OG80 Wireless Mechanical Keyboard - icon 8
Pink Light
Blinking / Flashing
IQUNIX OG80 Wireless Mechanical Keyboard - icon 9
White Light
On / Blinking
Low Battery
Level
Bluetooth Device #1
Re-Connecting
/ Pairing On
Bluetooth Device #2
Re-Connecting
/ Pairing On
Bluetooth Device #3
Re-Connecting
/ Pairing On
2.4GHz Device
Re-Connecting
/ Pairing On
Caps Lock On & Off
/ Special Keys
Combination Enabled

Hold IQUNIX OG80 Wireless Mechanical Keyboard - icon 10 first then corresponding keys to enable special keys combination.
Short Press: Hold FN first, then the corresponding key, and release both keys.
Long Press: Hold FN first, then the corresponding key. Hold for 5 seconds until the indicator starts blinking.

IQUNIX OG80 Wireless Mechanical Keyboard - icon 11 Three Ways of Connecting Devices

Bluetooth Mode

  1. Toggle the keyboard Mode Switch to the wireless side. IQUNIX OG80 Wireless Mechanical Keyboard - icon 12
  2. Short Press IQUNIX OG80 Wireless Mechanical Keyboard - icon 10+ IQUNIX OG80 Wireless Mechanical Keyboard - icon 13 to make the indicator blink in blue, then Long Press IQUNIX OG80 Wireless Mechanical Keyboard - icon 10 + IQUNIX OG80 Wireless Mechanical Keyboard - icon 13to make the indicator flash in blue.
  3. Select the pairing device [IQUNIX OG80 BT 1]. The indicator turns off when the keyboard is paired successfully.

IQUNIX OG80 Wireless Mechanical Keyboard - Three Ways of Connecting Devices 1

In order to complete the pairing of the keyboard with a second or third new Bluetooth device, repeat the instructions from Step 2 and replace the “FN+1” with “FN+2” or “FN+3”. The devices will be shown as [IQUNIX OG80 BT 2] and [IQUNIX OG80 BT 3].

2.4GHz Mode

  1. Toggle the keyboard Mode Switch to the wireless side. IQUNIX OG80 Wireless Mechanical Keyboard - icon 12
  2. Plug the 2.4GHz receiver into your computer.
    IQUNIX OG80 Wireless Mechanical Keyboard - Three Ways of Connecting Devices 2
  3. Press IQUNIX OG80 Wireless Mechanical Keyboard - icon 10IQUNIX OG80 Wireless Mechanical Keyboard - icon 14 to enter 2.4GHz pairing mode. The indicator turns off when the keyboard is paired successfully.

Wired Mode

  1. Toggle the keyboard Mode Switch to the wired side. IQUNIX OG80 Wireless Mechanical Keyboard - icon 12
  2. Plug the USB cable into your device.
    IQUNIX OG80 Wireless Mechanical Keyboard - Three Ways of Connecting Devices 3

*Please find the 2.4GHz receiver under the magnetic cover of OBSC (On-Board Storage Compartment).
*Caution: The rated power for the charger must not exceed 5V1A. Connection to a higher power output will damage the keyboard.

Special Keys Combinations

IQUNIX OG80 Wireless Mechanical Keyboard - icon 10 + IQUNIX OG80 Wireless Mechanical Keyboard - icon 15

IQUNIX OG80 Wireless Mechanical Keyboard - Special Keys Combinations 1

Backlight Keys Combinations (Short Press)

IQUNIX OG80 Wireless Mechanical Keyboard - icon 10 + IQUNIX OG80 Wireless Mechanical Keyboard - icon 15

IQUNIX OG80 Wireless Mechanical Keyboard - Backlight Keys Combinations 1

*Available for Backlit version only.

Keyboard Layout

IQUNIX OG80 Wireless Mechanical Keyboard - Keyboard Layout 1

Follow us: IQUNIX

IQUNIX OG80 Wireless Mechanical Keyboard - icon 16

To learn more details, please reach out to us on official website or social media.
Official website: www.IQUNIX.store

Series: OG80
Number of Keys: 83
Input: 5V1A
Battery Specifications: 3.7V 4000mAh
Precautions: See Warranty Card
Manufacturer: Shenzhen Silver Storm Technology Co., Ltd.
A905, Rongchaobinhai Bldg., Haixiu Rd., Bao’an District, Shenzhen, China
Packing List: Keyboard, Dust Cover, USB Cable, 2.4GHz Receiver, Keycap & Switch Puller, Bluetooth Dongle, Manual, Warranty Card

https://manual-hub.com/

Documents / Resources

IQUNIX OG80 Wireless Mechanical Keyboard [pdf] Instruction Manual
OG80 Wireless Mechanical Keyboard, OG80, Wireless Mechanical Keyboard, Mechanical Keyboard, Keyboard

References

Leave a comment

Your email address will not be published. Required fields are marked *