IOGEAR GXRMSW02 Secure KVM Remote Port Selector
Specifications
- Port Switching Capability: Supports switching between 2, 4, or 8 computer systems connected to a compatible IOGEAR Secure KVM switch.
- Security Compliance: TAA-Compliant and designed to meet NIAP Protection Profile v4.0 (PPv4.0) security standards.
- Physical Interface:
- Pushbuttons: Eight numbered pushbuttons (1–8) labelled ‘A’, each with an associated LED indicator.
- Status LEDs: Indicators for Num Lock, Caps Lock, Scroll Lock, and CAC (Common Access Card) status.
- Label Area: A designated area at the bottom for port name labels.
- Connectivity: Connects to the IOGEAR Secure KVM switch via a wired port selector, providing full operator control.
- Plug and Play: No additional software or drivers required for installation.
- Cable Length: Available in 6 ft and 10 ft options.
Package Contents
- 1 xGXRMSW02
- 1 x Quick Start Guide
- 1 x Warranty Card
System Requirements
IOGEAR PP4.0 Secure KVM
- GCS1212TAA4, GCS1214TAA4, GCS1218TAA4,
- GCS1222TAA4, GCS1224TAA4, GCS1228TAA4,
- GCS1312TAA4, GCS1314TAA4, GCS1322TAA4,
- GCS1324TAA4, GCS1412TAA4, GCS1414TAA4,
- GCS1418TAA4, GCS1422TAA4, GCS1424TAA4,
- GCS1428TAA4, GCS1212TAA4C, GCS1214TAA4C,
- GCS1218TAA4C, GCS1222TAA4C, GCS1224TAA4C,
- GCS1228TAA4C, GCS1312TAA4C, GCS1314TAA4C,
- GCS1322TAA4C, GCS1324TAA4C, GCS1412TAA4C,
- GCS1414TAA4C, GCS1418TAA4C, GCS1422TAA4C,
- GCS1424TAA4C, GCS1428TAA4C, GCS1512TAA4,
- GCS1514TAA4, GCS1522TAA4, GCS1524TAA4,
- GCS1512TAA4C, GCS1514TAA4C, GCS1522TAA4C,
- GCS1524TAA4C
OVERVIEW
- A. Port Selection Pushbuttons
- B. Port LEDs
- C. Num Lock LED
- D. Caps Lock LED
- E. Scroll Lock LED
- F. CAC LED
- G. Port Name Label Area
Hardware Installation
Connect the cable on the GXRMSW02 to the IOGEAR PP4.0 Secure KVM RPS port.
Notes:
- Connect GXRMSW02 before IOGEAR PP4.0 Secure KVM is powered on
- Any connection of GXRMSW02 after the IOGEAR Secure KVM is powered on will not be detected by the KVM
- When attached to a 2-Port Secure KVM Switch, only pushbuttons numbered 1 and 2 will be detected and functional When attached to a 4-Port Secure KVM Switch, only pushbuttons numbered 1, 2, 3 and 4 will be detected and functional. When attached to an 8-Port Secure KVM Switch, eight pushbuttons will be detected and functional
Warning – If a mechanical intrusion is detected by the RPS (connected with the switch and aligned), this will permanently disable both the RPS itself and the switch and all LEDs (on RPS) and the front panel LEDs except the Power LED (on switch) will flash continuously.
Warranty
Limited Warranty
This product carries a 3-year limited or lifetime warranty.
- For the terms and conditions of this warranty, please go to https://www.iogear.com/support/warranty
- Register online at https://www.iogear.com/register
Important Product Information
- Product Model
- Serial Number
Contact
- WE’RE HERE TO HELP YOU!
- NEED ASSISTANCE SETTING UP THIS PRODUCT?
Make sure you:
- Visit www.iogear.com for more product information
- Visit www.iogear.com/support for live help and product support
IOGEAR
EMC Information
FEDERAL COMMUNICATIONS COMMISSION STATEMENT
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at their own expense.
- FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
- Warning: Operation of this equipment in a residential environment could cause radio interference.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference and
- This device must accept any interference received, including interference that may cause undesired operation.
CE Statement
This device has been tested and found to comply with the following European Union directives: Electromagnetic Compatibility (2014/30/EU) and Low Voltage (2006/95/EC). it.
- WARNING: This product may expose you to chemicals including Cadmium, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Documents / Resources
 |
IOGEAR GXRMSW02 Secure KVM Remote Port Selector [pdf] User Guide GXRMSW02 Secure KVM Remote Port Selector, GXRMSW02, Secure KVM Remote Port Selector, KVM Remote Port Selector, Remote Port Selector, Port Selector, Selector |