Inventor FN40-INV Floor Fan
Product Usage Instructions
- Follow the installation instructions provided in the user manual to set up the product correctly.
- Use the designated power button to turn the fan on or off as needed.
- Use the speed control settings to adjust the fan flow rate based on your preference.
- Regularly clean the fan blades and ensure proper ventilation to maintain optimal performance.
CAUTION
For safe operation, please read and follow the instructions below carefully.
WARNING
- Ifthe supply cord is damaged, it must be replaced by the manufacturer or its service agent, or a similarly qualified person in order to avoid a hazard.
- Domestic use only.
- To avoid the risk of electrical shock, do not immerse the unit, cord, or plug in water or any other liquids.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Minors should be supervised at all times to avoid the mistreatment of the unit and/or possible injury. - When the appliance is not operating, and, prior to cleaning, please unplug it from the power socket.
- When assembling the fan, make sure that the protective fan grill covers are properly installed.
Do not dispose of this product as unsorted municipal waste. This appliance requires special treatment for disposal. It is prohibited to dispose of this appliance in domestic household waste. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
To return your used device, contact the retailer; it is possible they may dispose of it at a recycling facility.
RULES FOR SAFE OPERATION
- While the fan is operating, no sharp objects, such as pencils, should be inserted through the protective grill. Be extra cautious when handling and be certain no fingers penetrate beyond the protective grill area; this should be strictly avoided at all times.
- Be certain that the fan is disconnected when repositioning from one location to another.
- Be certain that the fan is on sturdy grounds while operating, to avoid accidental tipping.
- Be extra cautious when operating near a window, as rain may cause an electric shock.
- This device is intended for domestic use only.
INSTALLATION INSTRUCTIONS
Name of Components
Useful Tip
- Prior to installation, remove the fan leaf lock nut and the mesh hood lock nut from the fuselage.
Installation
- Install by rotating (screwing) the pole to the base.
Front and back protective Fan Grill Installation
INSTRUCTIONS FOR USE
Remote control functions
Useful Tip
- The remote control operates best when it is within a range of 5 meters from the fan, and with an angle of no more than 30°.
Instructions for main unit
Air Speed Button
- Press for a short period of time to adjust the air speed, prolonged period (two seconds to set the timer.
MAINTENANCE INSTRUCTION
This fan requires limited maintenance. Do not attempt to fix it on your own. Always refer to qualified personnel if any service is required.
- Prior to cleaning and assembling, the fan must be unplugged.
- To ensure adequate air circulation, vents should be free of dust at all times. Do not disassemble the fan in order to remove the dust.
- The exterior parts of the device may be wiped with a soft and damp, with a mild detergent, cloth.
- The use of any abrasive detergents or solvents should be avoided, as this may result in scratching the surface. The use of gasoline or paint thinner for cleaning purposes should be avoided.
- Water or any other liquids in the motor housing or interior parts of the device must be avoided at all times.
CLEANING
- Prior to performing any cleaning, the device must be unplugged.
- All plastic parts of the device should be cleaned with a soft, moist cloth and with mild soap.
Thoroughly clean any soap excess with a dry cloth.
Description | Symbol | Value | Unit |
Maximum fan flow rate | F | 57.8 | m3/min |
Fan power input | P | 41.6 | W |
Service value | SV | 1.39 | (m3/min)/W |
Standby/off power consumption | PSB | 0.20 | W |
Seasonal electricity consumption | Q~(P*320+PSB* 1120)/1000 | 15.6 | kWh/a |
Fan sound power level | LWA | 59 | dB(A) |
Maximum air velocity | c | 3.4 | meters/sec |
Measurement standard for service value | EN 60879:2019 | ||
Contact details for obtaining more information | Inventor A.G. A.E. 24th National Road Athens – Lamia & 1 Thoukididou Str., Ag.Stefanos, 14565
Tel.: +30 211 300 3300, Fax: +30 211 300 3333 – 3333 MADE in P.R.C. |
- All the pictures in the manual are for explanatory purposes only. The actual shape of the unit you purchased may be slightly different, but the operations and functions are the same.
- The company may not be held responsible for any misprinted information. The design and the specifications of the product, for reasons such as product improvement, are subject to change without any prior notice.
- Please consult with the manufacturer at +30 211 300 3300 or with the Sales agency for further details. Any future updates to the manual will be uploaded to the service website, and it is advised to always check for the latest version.
Scan here to download the latest version of this manual. www.inventorappliances.com/manuals
FAQ
- Q: How do I clean the fan blades?
- A: To clean the fan blades, first, ensure the fan is unplugged.
Use a soft, damp cloth to gently wipe down the blades, avoiding any harsh chemicals.
- A: To clean the fan blades, first, ensure the fan is unplugged.
- Q: Can I use this product in a humid environment?
- A: It is recommended to avoid using the product in high-humidity areas to prevent damage to the internal components.
Documents / Resources
![]() |
Inventor FN40-INV Floor Fan [pdf] User Manual FN40-INV, FN40-INV Floor Fan, FN40-INV, Floor Fan, Fan |