Intesis IN775FGL00MO000 VRF Systems to Modbus
Important Information
Item number: IN775FGL00MO000
The Fujitsu application has been specially designed to allow bidirectional control and monitoring of Fujitsu VRF systems from a BMS, SCADA, PLC, or any other device working as a Modbus client. The solution allows the integration of up to 64 indoor units from a single interface.
Features And Benefits
Simultaneous Modbus TCP and RTU management
The gateway is a Modbus server and is able to manage both Modbus TCP and Modbus RTU simultaneously.
Automatic identification
A scan function is available for automatic identification of the units present in the VRF system.
Individual indoor unit energy consumption signals
Energy consumption signals from each indoor unit are available, so they can be checked individually.
Commissioning-friendly approach with Intesis MAPS
Templates can be imported and reused as often as needed, significantly reducing commissioning time.
Direct access to the outdoor unit
Connection is simple, as the interface connects directly to the outdoor unit’s communication bus.
Outdoor unit signals
Signals assigned to the outdoor unit are available to be used in the integration.
Multiple TCP client support
The interface supports up to 6 TCP clients (incoming sockets).
Configuration tool and interface automatic updates
Both the Intesis MAPS configuration tool and the interface’s firmware can receive automatic updates.
General
| Net Width (mm) | 106 |
| Net Height (mm) | 58 |
| Net Depth (mm) | 90 |
| Net Weight (g) | 375 |
| Packed Width (mm) | 130 |
| Packed Height (mm) | 85 |
| Packed Depth (mm) | 140 |
| Packed Weight (g) | 375 |
| Operating Temperature °C Min | -10 |
| Operating Temperature °C Max | 60 |
| Storage Temperature °C Min | -30 |
| Storage Temperature °C Max | 60 |
| Power Consumption (W) | 127 |
| Input Voltage (V) | For DC: 12 .. 36 VDC ±10%, Max: 250 mA For AC: 24 VAC ±10 %, 50-60 Hz, Max: 127 mA Recommended voltage: 24 VDC, Max: 127 mA |
| Power Connector | 3-pole |
| Configuration | Intesis MAPS |
| Capacity | Up to 64 indoor units and up to 12 outdoor units. |
| Installation Conditions | This gateway is designed to be mounted inside an enclosure. If the unit is mounted outside an enclosure, precautions should always be taken to prevent electrostatic discharge to the unit. When working inside an enclosure (e.g., making adjustments, setting switches, etc.), typical anti static precautions should always be followed before touching the unit. |
| Content of Delivery | Intesis Gateway, Installation Manual, USB Configuration cable. |
| Not Included (in delivery) | Power supply not included. |
| Mounting | DIN rail mount (bracket included), Wall mount |
| Housing Materials | Plastic |
| Warranty (years) | 3 years |
| Packaging Material | Cardboard |
Identification And Status
| Product ID | IN775FGL00MO000_MBS_FGL |
| Country of Origin | Spain |
| HS Code | 8517620000 |
| Export Control Classification Number (ECCN) | EAR99 |
Physical Features
| Connectors / Input / Output | Power supply, EIA-485, KNX, Ethernet, HVAC port, Binary inputs (dry contact), Console port USB. |
| LED Indicators | Gateway and communication status. |
| Push Buttons | Factory reset. I-Am message (for BACnet only). Normal mode/programming mode switch (for KNX only). |
| DIP & Rotary Switches | EIA-485 serial port configuration. |
| Battery Description | Manganese Dioxide Lithium button battery. |
Certifications And Standards
| ETIM Classification | EC001604 |
| WEEE Category | IT and telecommunications equipment |
Use Case
Integration example.
Use Intesis MAPS to change the protocol: BACnet, Modbus, KNX, or Home Automation
Documents / Resources
 |
Intesis IN775FGL00MO000 VRF Systems to Modbus [pdf] Owner's Manual IN775FGL00MO000, IN775FGL00MO000 VRF Systems to Modbus, IN775FGL00MO000, VRF Systems to Modbus, Systems to Modbus, to Modbus |