INTELLINET 562232 18 Port PoE Plus Switch
Specifications
- Model: 562232 (IPS-16G02-440W)
- Ports: 18 (16 Gigabit Ethernet Ports, 2 SFP Uplinks)
- Power Over Ethernet (PoE++) support
- LED Indicators: Power, PoE, Link/Activity
- Auto-MDI/MDI-X support for all ports
For additional benefits
Scan to register your product warranty
or go to: register.intellinet-network.com/r/562232
Connections & Indicators
LEDs
The LED indicators — Power, PoE, Link/Activity — make it easier to monitor the switch and its connections.
NOTE: All ports provide power to a connected device, and all connected devices should comply with IEEE 802.3af.
Ports
All ports on the switch support Auto-MDI/MDI-X functionality, so crossover cables and uplink ports are not needed for connections to PCs, routers, other switches, etc.
Cat5e/6/6a UTP/STP cables provide optimal performance; if a status LED doesn’t indicate a link or activity, check the corresponding device for proper setup and operation.
| LED | Status | Status Description |
| PWR | Off | Power Off |
| On | Power On | |
| PoE/ Alert | Off | The power budget is within normal limits |
| On | The power usage is surpassing the power budget | |
| Link/ Act
1-16 |
Green | A device is connected to the port at 1000 Mbps speeds. |
| Yellow | A device is connected to the port at 10/100 Mbps speed. | |
| Flashing | Sending or receiving data | |
| Off | No device is connected to the port. | |
| PoE 1-16 | On | The connected device is receiving power. |
| Off | No device is connected to the port. | |
| SFP 17S,
18S |
Green | A device is connected to the port at 1000 Mbps speeds. |
| Yellow | A device is connected to the port at 10/100 Mbps speed. | |
| Flashing | Sending or receiving data | |
| Off | No device is connected to the port. |
Power
Use the included power cord to connect the device (on the rear panel) to an AC outlet. Confirm that the power LED on the front panel is lit.
Installation
Prior to use, it is recommended that the switch be placed/positioned:
- on a level surface that can support the weight of the switch
- with at least 25 mm (approx. 1”) of clearance for ventilation;
- away from sources of electrical noise: radios, transmitters, broadband amplifiers, etc.;
- within 100 m (approx. 328’) of network devices it’s to be connected to.
Chassis Ground Column (Rear Panel)
Wire the grounding terminal to an earth-grounding object to prevent power spikes.
Rackmount
The switch includes brwackets and screws for optional rack mounting.
- Disconnect any cables from the switch.
- Position a bracket over the mounting holes on one side of the switch and secure it in place with screws.
- Repeat Step 2 on the other side of the switch.
- Position the switch in the rack and screw the brackets to the rack.
- Reconnect any cables.
For specifications, visit intellinet-network.com. Register your product at register. intellinet-network.com/r/562232 or scan the QR code on the cover.
WASTE ELECTRICAL & ELECTRONIC EQUIPMENT
DISPOSAL OF ELECTRIC AND ELECTRONIC EQUIPMENT
(Applicable In The European Union And Other European Countries With Separate Collection Systems)
This symbol on the product or its packaging means that this product must not be treated as unsorted household waste. In accordance with EU Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), this electrical product must be disposed of in accordance with the user’s local regulations for electrical or electronic waste. Please dispose of this product by returning it to your local point of sale or recycling pickup point in your municipality.
WARRANTY INFORMATION
REGULATORY STATEMENTS
FCC Class B
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: reorient or relocate the receiving antenna; increase the separation between the equipment and the receiver; connect the equipment to an outlet on a circuit different from the receiver; or consult the dealer or an experienced radio/TV technician for help.
CE/UKCA This device complies with the requirements of CE 2014/30/EU (UKCA Electromagnetic Compatibility Regulations 2016) and/or 2014/35/EU (UKCA Electrical Equipment [Safety] Regulations 2016).
The Declaration of Conformity for is available at:
https://support.intellinet-network.com/barcode/562232
North America
IC Intracom America
550 Commerce Blvd.
Oldsmar, FL 34677
USA
Asia & Africa
IC Intracom Asia
4-F, No. 77, Sec. 1, Xintai 5th Rd.
Xizhi Dist., New Taipei City 221
Taiwan
Europe
IC Intracom Europe
Löhbacher Str. 7, D-58553
Halver
Germany
All trademarks and trade names are the property of their respective owners. © IC Intracom.
All rights reserved. Intellinet Network Solutions is a trademark of IC Intracom, registered in the U.S. and other countries.
Printed on recycled paper. INT_562232_QIG_0325_REV_5.01
FAQ (Frequently Asked Questions)
- Q: What should I do if the PoE LED is alerting?
- A: If the PoE LED is alerting, it means the power usage is surpassing the budget. Check the connected devices for power consumption.
- Q: How do I know if a device is connected to a port?
- A: Check the Link/Activity LED status. If it is green or yellow, a device is connected and operating at specific speeds.
- Q: Do I need special cables for connecting devices?
- A: No, Cat5e/6/6a UTP/STP cables are recommended for optimal performance on all ports of the switch.
Documents / Resources
 |
INTELLINET 562232 18 Port PoE plus plus Switch [pdf] Instruction Manual IPS-16G02-440W, 562232 18 Port PoE plus plus Switch, 562232, 18 Port PoE plus plus Switch, PoE plus plus Switch, Switch |