inLine 40153 Smart Home Motion Detector User Guide

Wireless Local Area Networks (WLAN Radio Applications) Based on § 55 of the German Telecommunications Act {Telecommunications gensets – TKG) we herewith assign frequencies in the range 2400.0 – 2483.5 MHz for use of the general public in local networks, Wireless Local Area Networks (WLAN Radio Applications). With this General Allocation, we fulfil the compulsive implementation of the Decision by the European Commission on Harmonization of the Radio Spectrum for Use by Short Range Devices dated 2006/11/09 (2006/771/EG), as amended by implementing the decision of the Commission dated 2011/12/08 (2011/829/ EU), published in the Official Journal of the European Union L 329, page 10 ff. dated 2011/12/13 in Germany.
If you intend to use this product outside of Germany, please read up in advance on the respective regulations in your host country.

EXPLANATION OF WARNING SYMBOLS AND NOTES

This symbol indicates information that contributes to a better understanding.

TECHNICAL CHARACTERISTICS

Color: White

Material: ABS+PC plastic
Power consumption: 120-130mA

Standby: 13µA
Signal: WiFi 2.4 GHz, Protocol: IEEE802.11b/g/n

Range: Up to 45m (in visual contact)
Motion detection: 7 m

Operating temperature: 0°-40°C
Operating humidity: 20%-85%

Storage temperature: 0°-60°C
Storage humidity: 0%-90%

Weight: 100g
Dimensions (Ø): 46 mm, (ØxD): 46×60 mm w. base

Battery: 1x CR123A
Lifetime appr.: 2 years (at 7x per day)

Lifetime appr.: 5 years in standby
App: Smart Life

Compatible with: Amazon Alexa, Google Assistant

OPERATING THE INLINE SMART HOME MOTION DETECTOR

POWER SUPPLY

The device requires 1x CR123A battery, please remove the foil from the contact of the battery inside the motion detector, to put the sensor into operation.

The power status of the battery is displayed in the app.
Create an automation in the app (in the Smart section), activate the siren as soon as the battery status is low.

APP DOWNLOAD

ANDROID

Download the Smart Life APP from the Google Play Store and launch the app.

IOS

Download the APP „Smart Life“ from the APP Store and start the app.

REGISTER AND LOGIN THE APP

Open the Smart Life app on your phone.
Register with your mobile phone number or email address.
Select your router and confirm the WLAN password if necessary.
This connects the app to your network.

ADD/CONNECT DEVICE

Press „+“ sign (top right) or „Add device“ (in the middle of the screen). (Image 1)

Select your device from the displayed list. (Image 2)
The „Sensor (WiFi)“ is located in the „Security & Sensor“ section, please click to connect the product. (Image 2)

To connect, press the product reset button for 6 seconds until the LED starts flashing rapidly. Open the plastic housing of the transmitter to press the button. If so, confirm by pressing the „Next step“ box in the app. (Image 3)

Select your router and enter your Wi-Fi password. „Confirm“ so that the device can connect to your
network. (Image 4)

The app now connects to the device, wait until the display on your smartphone confirms that. (Image 5)

You can assign your connected device directly to a room, but you don‘t have to. (Image 6)

The device then appears in the device overview under „All devices“.

In principle, settings / scenarios / automations for several families can be stored in this app.
The administrator has permission to create families and to access all families.

DEVICE CONFIGURATION

Select the device from your connected devices to be set by clicking on it in the list. (Image 7)

The first view shows the status of the device.
(Image 8)

DEVICE DATA

PENCIL TOP RIGHT (IMAGE 8

These terms or assignments (Image 9) make it easier for you to create automatisms or scenarios, such as Device Name / Device Location / Network Check / Voice Control / Share Device / Create Group / Device Information / Feedback / Add to Home Screen / Check Firmware Upgrade / Remove the device / restore factory settings.

TROUBLESHOOTING

PROBLEM: SOLUTION
WiFi device does not turn on:
Make sure that the power supply is connected or that the battery of the WiFi device is not empty.

No WiFi connection possible:
Make sure that the router and the device to be connected are turned on. Check the available WiFi standard of the device. The InLine® Smart Home product supports WiFi 2.4GHz / IEEE802.11b/g/n.

Network is found but no connection possible:
Make sure that you have entered your WLAN password correctly. Check whether you have selected the correct device from the selection list. (For this product, please select the „Sensor (WiFi)“ in the list of „Security & Sensor“)

CONTACT

If you have any questions about the product or if you have any problems, you can contact the manufacturer directly via live.inline-info.com or via email at service@inline-info.de.

DISPOSAL

Electrical and electronic equipment and batteries must not be disposed of with household waste. The consumer is obliged by law to return electrical and electronic equipment and batteries at the end of their service life to the designated public collection points or to the point of sale. Dispose of the packaging material sorted by type.

SIMPLIFIED EC DECLARATION OF CONFORMITY

The Manufacturer / Importer:
INTOS ELECTRONIC AG
Siemensstrasse 11
35394 Giessen

Owner of the Trademark:

hereby declares that the wireless device In Line® Smart Home socket complies with Directive 2014/53/EU. The full part of the EU Declaration of Conformity is available at the following web address:

https://www.inline-info.com/en/downloadcenter

DISCLAIMER

EDITION ENGLISH 3/2019

No part of this manual may be reproduced in any form or duplicated or processed using electronic, mechanical or chemical processes without the publisher´s written consent. It is possible that this manual may still contain typographical defects or printing errors. However, the information in this manual is reviewed regularly and corrections will be made in the next edition. We accept no liability for technical or typographical errors and their consequences. All trademarks and industrial property rights are acknowledged. Changes in the sense of technical progress can be made without prior notice. Our products, including packaging, are not toys; they may contain small parts and sharp objects.

Keep away from children, please.

INTOS ELECTRONIC AG
Siemens Strasse 11, D-35394 Giessen
www.inline-info.com

Detailed descriptions of In Line Smart Home can be found at:
www.inline-info.com/smarthome

Documents / Resources

inLine 40153 Smart Home Motion Detector [pdf] User Guide
40153 Smart Home Motion Detector, 40153, Smart Home Motion Detector, Home Motion Detector, Motion Detector, Detector

References

User Manual

GENERAL INFORMATION

CONTENT OF DELIVERY

RADIO FREQUENCY NOTES