ITC-308-WIFI Smart Controller
“
Specifications:
- Model: ITC-308-WIFI
- Manufacturer: INKBIRD
- Supported Socket Types: US, EU, UK, AU
- Temperature Range: -40.0°C to 212.0°C
- Power Supply: 100-240V, 10A
- Control Interface: INKBIRD APP
Product Usage Instructions:
1. Connecting to WIFI:
To connect the device to WIFI, ensure correct phone and router
settings. Select the appropriate connection mode. In case of
connection issues, check for device malfunctions.
2. Temperature Probe Adjustment:
If the temperature reading is incorrect, adjust the probe
position. If used in liquids, dry the probe with a hairdryer and
calibrate using the CA function if needed.
3. Heating and Cooling Output:
If heating or cooling output does not turn on/off, check for
incorrect settings, compatibility issues, or output malfunctions.
Follow troubleshooting steps provided in the manual for
resolution.
4. App Connectivity:
If facing issues with the app connectivity, ensure the device is
close to the router, stable network settings, and proper operation.
Reconnect the device if necessary.
FAQ:
Q: What should I do if the device cannot connect to WIFI?
A: Check phone settings, router settings, connection mode
selection, and device malfunctions. Contact customer support if
issues persist.
Q: How do I troubleshoot temperature probe inaccuracies?
A: Adjust probe position, dry if used in liquids, check probe
integrity, and calibrate using the CA function if needed.
Q: What are the steps to resolve heating or cooling output
issues?
A: Verify settings, check compatibility, and troubleshoot output
malfunctions as per the manual instructions.
Q: How can I ensure stable app connectivity?
A: Keep the device close to the router, maintain stable network
settings, and follow proper operation procedures for app
stability.
“`
ITC-308-WIFI
Please keep this manual properly for reference. You can also scan the QR code to visit our official website for product usage videos. For any usage issues, please feel free to contact us at support@inkbird.com.
Wenn Sie eine Bedienungsanleitung in deutscher Sprache benötigen, scannen Sie bitte den QR-Code und besuchen Sie unsere Website, um sie zu erhalten und ein Video über die Verwendung des Produkts zu sehen. Se avete bisogno di un manuale di istruzioni in italiano, scansionate il codice QR e visitate il nostro sito web per ottenerlo e vedere un video su come utilizzare il prodotto. Si vous avez besoin d’un mode d’emploi en français, veuillez scanner le code QR pour visiter notre site officiel afin d’obtenir et de visionner la vidéo d’utilisation du produit ! Als je een Nederlandstalige handleiding nodig hebt, scan dan de QR-code om naar onze officiële website te gaan en bekijk de video over het gebruik van het product! Si necesita el manual de instrucciones en español, escanee el código QR para ir a nuestro sitio web oficial y ver el vídeo sobre cómo utilizar el producto.
Warm tips
To quickly jump to a specific chapter page, click on the relevant text on the contents page.
You can also use the thumbnail or document outline in the top left corner to quickly find a specific page.
1
1
2
4
INKBIRD
5
11
19
20
09 FCC Requirement
21
10 Troubleshooting Guide
24
1
2
3
1
2 3 4 58
7
6
7
6
7
6
7
6
US Sockets EU Sockets UK Sockets AU Sockets
4
INKBIRD
INKBIRD
INKBIRD APP 5
United States
United States
6
7
8
9
10
11
12
TS 77.0
HD 3.0 CD 3.0 AH 212 AL -40.0 PT O Minute CA 0.0 CF
F
13
14
15
16
17
18
19
20
09 FCC Requirement
changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
21
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on
22
a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
23
10 Troubleshooting Guide
Issues Causes Solutions
Can not connect to WIFI.
1. Incorrect phone settings. 2. Incorrect router settings. 3. Incorrect connection mode selection. 4. Device malfunction.
1. In the phone settings, all permissions for the INKBIRD app are turned on. The Bluetooth and location functions of the phone are turned on. 2. Please ensure that the router can transmit 2.4GHz wifi signal alone, and the mobile phone remains connected to the 2.4GHz wifi that can access the Internet. Please make sure the SSID of the 2.4GHz wifi is not hidden. The password is not empty. There is no limit on the number of connected devices to the router. If you are not sure whether the upper limit has been reached, please turn off 2-3 WIFI devices. Router settings are as follows: ·Wireless protocol: 802.11 b/g/n, but cannot be set to 11n only; ·Security mode: WPA/WPA2 ·Authentication type: AES ·Enable DHCP service ·No VPN service. 3. Select the correct WiFi mode in the app. If there are many WiFi products interfering nearby, please switch the device to slow flash (AP) mode to connect. If it still does not work, please contact customer service.
24
Issues Causes Solutions
The
1.The
1. Adjust the position of the probe.
probe probe is 2. If the probe was used in liquids,
reading placed in a dry it using a hairdryer and then test
is
area with it at room temperature.
incorrect. poor
3. Check if the probe is intact.
tempera- 4. If the deviation is small, use the
ture
CA (calibration) function to calibrate.
circulation.
2.The
probe is
damaged.
Heating output will not turn on.
1. Incorrect settings. 2.Incompatible heater. 3. Output malfunction.
1. Verify that the settings are correct. 2. The heater power is within the range of 100-240V, 10A. The heater can automatically turn on when plugged in. The heater does not have a built-in temperature control, or the built-in temperature control does not affect the ITC-308-WIFI control. 3. There is no problem with 1&2 please: · Unplug the controller. · Press and hold the “SET” button. · Plug the controller to power on, then release the “SET” button · Quickly press the ” ” button ( do not press the ” ” button). The “HEATING” indicator and output should activate. If the heater still does not work, please contact customer service.
25
Issues Causes Solutions
Cooling output will not turn on.
1. Incorrect 1. Verify that the settings are
settings. correct.
2. Incom- 2. The cooler power is within the
patible range of 100-240V, 10A. The cooler
cooler.
can automatically turn on after
3. Output power is connected. The cooler
malfunc- does not have a built-in temperature
tion.
control, or the built-in temperature
control does not affect the
ITC-308-WIFI control.
3. There is no problem with 1&2
please:
· Unplug the controller.
· Press and hold the “SET” button.
· Plug the controller to power on,
then release the “SET” button
· Quickly press the ” ” button ( do
not press the ” ” button). The
‘cooling’ indicator and output should
activate.
If the cooler still does not work,
please contact customer service.
26
Issues Causes Solutions
Heating output will not turn off.
1. Incorrect settings. 2. Heater power exceeds limit. 3. Output malfunction.
1. Verify that the settings are correct. 2. The heater power is within the range of 100-240V, 10A. 3. There is no problem with 1&2 please: ·Unplug the controller. ·Press and hold the “SET” button. ·Plug the controller to power on, then release the “SET” button · Quickly press the ” ” button (do not press the ” ” button). The “COOLING” indicator and output should activate. If the heater still does not off, please contact customer service.
Cooling output will not turn off.
1. Incorrect settings. 2. Cooler power exceeds limit. 3. Output malfunction.
1. Verify that the settings are correct. 2. The cooler power is within the range of 100-240V, 10A. 3. There is no problem with 1&2 please: ·Unplug the controller. ·Press and hold the “SET” button. ·Plug the controller to power on, then release the “SET” button · Quickly press the ” ” button (do not press the ” ” button). The ‘heating’ indicator and output should activate. If the cooler still does not off, please contact customer service.
27
Issues Causes Solutions
App
1. Device 1. Install the controller as close to
cannot offline
the router as possible.
save
2. Network If it is still offline, please delete the
settings. unstable offline device and reconnect.
3. Opera- 2. Ensure the network and wifi are
tion error stable.
3. After the settings are completed,
please exit and save the settings
using the “<“(back) button of the
app. Please do not use the back
button of the phone itself to exit.
28
Shenzhen Inkbird Technology Co.,Ltd.
support@inkbird.com
Consignor: Shenzhen Inkbird Technology Co., Ltd. Office Address: Room 1803, Guowei Building, No.68 Guowei Road, Xianhu Community, Liantang, Luohu District, Shenzhen, China Manufacturer: Shenzhen Inkbird Technology Co., Ltd. Factory Address: 6th Floor, Building 713, Pengji Liantang Industrial Area, No.2 Pengxing Road, Luohu District, Shenzhen, China
MADE IN CHINA DESIGNED BY INKBIRD
V10.0
Documents / Resources
 |
INKBIRD ITC-308-WIFI Smart Controller [pdf] Instruction Manual ITC-308-WIFI Smart Controller, ITC-308-WIFI, Smart Controller, Controller |