Infinix XEOE01 X Buds 3 Loop
What’s In The Box
Product Overview
- Earbud Indicator
- Multi-Function Button(MFB)
- Microphone
- Type-C Charging Port
- Left Earbud
- Right Earbud
- Case Status Indicator
Using Your Earbuds
POWER ON/OFF
- Take out the earbuds from the charging case and the earbuds will power on automatically.
- Long press the left or right ear 3s (non -linking left and right).
- When the earbuds are outside the charging case and powered on. press and hold for 5 seconds on each earbud MFB button to power off.
- Put the earbuds back into the charging case and close the lid to power off automatically.
PAIRING
Earbuds will power on and enter pairing mode automatically when taking out the earbuds from charging case.
- Make sure the distance of the earbuds and your device is less than 1 metre/3.3 feet at the first time of connection.
- When turned on, the earbuds will automatically connect to the last connected device if available, lf not, the earbuds will enter pairing mode. Under any abnormal condition, put the earbuds back into the charging case with the lid closed, then take out again after 15 seconds.
- When the left earbud and right earbud are not paired automatically with status indicators flashing white on both earbuds, tap 6 times on both earbuds simultaneously to manually enter TWS pairing mode.
DOWNLOAD THE WELIFE APP
- Scan the QR code to quickly download the Welife app for preferred sound effects, customer support, connection popup, and more features to discover (for Andr
- Make suroid 7.0+ dee y vices).our earbuds are powered on, then open the Welife app and tap the “Add Device” button to pair
*Only for dethe earbuds with the app.vices running Android 7.0 and later versions.
Experience Multiple EQ Modes:
Support Bass Booster, Treble Booster, Vocal Booster, and Default mode. Choose the one that suits you best.
Quick Activation of Game Mode:
Enable Game Mode quickly in the app to achieve better synchronization of audio and video for an enhanced gaming experience.
Touch Controls Customization:
Discover or customize the functions triggered with earbuds touch controls Answering calls and controlling music are at your fingertips.
RESET
(Try the following steps if you fail pairing between two earbuds, or between earphones and device)
- Clear pairing record between the earbuds and your device in the bluetooth pairing list on your device.
- Keep the earbuds in disconnected or standby mode，take out the earbuds from the charging case, simultaneously tap 4 times and then long press on both MFB button within 3 seconds to clear the pairing record and enter the pairing mode automatically.
CONTROLS
MUSIC
CALL
OTHER 
Product Specification
CONSIDERATEHINTS
Do not turn up the volume to a fair high level constantly as this could shorten the service life or this product or impair your hearing. When encounter any fault during operation, please cut off the power supply and disconnect the type-C cable to prevent further damage to the product or other components.
The Wireless transmission range or connectivity could be affected by low battery power, ln that case, please recharge immediately.
ATTENTION
- Use original or certified cables
- Do not expose to the liquids
- Do not disassemble
- Avoid dropping
- Avoid extreme temperatures
Do not use the product outdoors during a thunderstorm Do not use any corrosive cleaner/oil to clean
CAUTION
- Use carefully with the earphone, maybe excessive sound pressure from earphones and headphones can cause hearing loss.
- Risk of explosion if battery is replaced by an incorrect type, dispose of used batteries according to the instructions.
- disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
- leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas;
- a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
- EUT Temperature: 0℃~+45℃(with adapter).
- To prevent possible hearing damage, do not listen at high volume levels for long periods.
High sound pressure with hearing damage risk.
Do not listen at high volume levels for long periods.
Frequency Range(RF)：
BT: 2400-2483.5MHz(TX/RX)
Max. Of TBT(EDR): 5.89dBmransmit power:
BLE:4.44 dBm
EU DECLARATION OF CONFORMITY
The full text of the EU declaration of conformity is available at the following internet address: https://www.infinixmobility.com/care/declaration
Frequently Asked Questions
- Q: How do I charge the earbuds?
A: Place the earbuds back in the charging case and connect it to a power source using the provided USB-C cable. - Q: How do I know if the earbuds are fully charged?
A: The earbud indicator will show a steady light when they are fully charged.
Documents / Resources
 |
Infinix XEOE01 X Buds 3 Loop [pdf] User Manual XEOE01, XEOE01 X Buds 3 Loop, XEOE01, X Buds 3 Loop, Buds 3 Loop, 3 Loop |
