In Common With Gemma Table Lamp Instruction Manual

Gemma Table Lamp
Instruction Manual

Contents hide

Gemma Table Lamp

Gemma Table Lamp, Medium
How to Install Your New Light
Please check that you received all of the components pictured in this guide. Reach out to us if anything is missing. It’s very rare, but it happens. Don’t forget to turn off the electrical power source. You won’t need any additional tools.
CAUTION
As a safety feature, this lamp has a polarized plug to reduce the risk of electric shock. This means it has two flat prongs and a third circular prong underneath, and it will fit in an outlet one way only. If the plug does not fit fully and easily into the outlet, do not force it; contact a qualified electrician.

Step 1: Slide the glass globe (F) over the table base (G). Align the sidehole on the glass base with the cord. Step 2: Thread washer (D) onto table base, tightening the globe (F) into place.
Step 3: Thread the harp (B) onto the table base (G). Leave a sliver of space between the harp and the washer. Do not overtighten the harp, this will prevent the glass base from bearing too much weight.Step 4: Screw bulb (A) into place.Step 5: Carefully place Gemma shade (E) onto the harp (B), feeding the threaded part through the hole in the shade.Step 6: Screw finial (C) onto harp (B).Step 7: Plug in the fixure and turn on the light.