IMI TA TA-PILOT-R High Performing Differential Pressure Controller
Installation Instructions
|
DN Size |
65 2 1/2” | 80 3” | 100 4” | 125 5” | 150 6” | 200 8” | |
|
Sp [kPa] / [psi] |
ΔH = 0-400 kPa / 0-58 psi | 45 / 6.5 | |||||
| ΔH = 400-1200 kPa / 58-174 psi |
65 / 9.4 |
||||||
|
Kvmin / Cvmin |
4 / 5 | ||||||
| Kvm / Cvm |
75 / 87 |
110 / 127 | 180 / 208 | 270 / 312 | 400 / 462 | 600 / 694 | |
|
qmax [m3 /h] / [gpm] |
53 / 233 | 78 / 343 | 127 / 559 | 191 / 841 | 283 / 1246 |
424 / 1867 |
|
Sp = Sealing pressure, the increase of ΔpL in kPa (psi) when a Δp controller controls ΔpL from Kvmin (Cvmin) down to zero flow
Kvmin (Cvmin) = m3 /h (gpm) at a pressure drop of 1 bar (1 psi) and minimum opening corresponding to the p-band.
Kvm (Cvm) = m3 /h (gpm) at a pressure drop of 1 bar (1 psi) and maximum opening corresponding to the p-band.
qmax = The maximum recommended flow through a Δp controller.
ΔH = Available differential pressure.
 |
10-50 | 30-150 | 80-400 | kPa |
| 10 | 30 | 80 | ||
| 1 – 7 | 4 – 21 | 2 – 58 | psi | |
| 1 | 4 | 12 |
 |
DN | 65 | 80 | 100 | 125 | 150 | 200 |
| H [mm] | 274 | 281 | 303 | 313 | 331 | 361 | |
| Size | 2 1/2” | 3” | 4” | 5” | 6” | 8” | |
| H [in.] | 10.7 | 11.1 | 11.9 | 12.3 | 13 | 14.2 |
We reserve the right to introduce technical alterations without prior notice.
Documents / Resources
 |
IMI TA TA-PILOT-R High Performing Differential Pressure Controller [pdf] Instruction Manual TA-PILOT-R, High Performing Differential Pressure Controller, TA-PILOT-R High Performing Differential Pressure Controller, Differential Pressure Controller, Pressure Controller, Controller |
