ToolkitRC MC8 Cell Checker na Multi Tool with USB-C Fast Charging

Okwu mmalite

Daalụ maka ịzụta MC8 multi-checker. Biko gụọ akwụkwọ ntuziaka a nke ọma tupu ị rụọ ọrụ ngwaọrụ.

Akara ngosi aka

• Ndụmọdụ
• Ihe dị mkpa
• Nhọpụta

Ozi Mgbakwunye

Maka ozi ndị ọzọ gbasara ọrụ na mmezi nke ngwaọrụ gị, biko gaa na njikọ a: www.toolkitrc.com/mc8

Akpachara anya maka nchekwa

1. The arụmọrụ voltage nke MC8 dị n'etiti DC 7.0V na 35.0V. Gbaa mbọ hụ na agbanweghị polarity nke isi iyi ike tupu ejiri ya.
2. Arụla ọrụ n'okpuru oke okpomọkụ, iru mmiri, gburugburu ọkụ na mgbawa.
3. Ahapụla n'echeghị ya mgbe ị na-arụ ọrụ.
4. Kwupu isi iyi ike mgbe ejighi ya

Ngwaahịa agwụlaview

MC8 bụ kọmpat multi-checker emebere maka onye ọ bụla nwere mmasị. N'igosipụta ngosi IPS na-egbuke egbuke, agba, ọ ziri ezi na 5mV

• Na-atụ ma na-edozi batrị LiPo, LiHV, LiFe na Lion.
• Nnukwu voltage ntinye DC 7.0-35.0V.
• Na-akwado ntinye ike ọdụ ụgbọ mmiri Main/Balance/signal.
• Na-atụ ma na-ewepụta akara PWM, PPM, SBUS.
• USB-A, USB-C mmepụta ọdụ ụgbọ mmiri abụọ.
• USB-C 20W PD mmepụta chaja ngwa ngwa.
• Nchekwa nfefe batrị. Na-agbanyụ mpụta USB na-akpaghị aka mgbe batrị ruru ọkwa dị oke egwu.
• Ntụle na nguzozi ziri ezi: <0.005V.
• Ntụle ugbu a: 60mA.
• 2.0 inch, IPS zuru viewihe ngosi n'akuku.
• Mkpebi dị elu 320*240 pikselụ.

Nhazi

Ojiji mbụ

1. Jikọọ batrị na ọdụ ụgbọ mmiri MC8, ma ọ bụ jikọọ 5.0-35.0V voltage gaa n'ọdụ ụgbọ mmiri XT60 nke MC8.
2. Ihuenyo na-egosi akara buut maka 0.5 sekọnd
3. Mgbe emechara buut ahụ, ihuenyo na-abanye na interface isi wee gosipụta dị ka ndị a:
4. Tụgharịa rola ka ịpịgharịa n'etiti menu na nhọrọ.
5. Obere ma ọ bụ ogologo pịa rola ka ịbanye ihe
6. Jiri mmịfe mmepụta ka ịhazigharị mmepụta ọwa
   1. Akwụkwọ mpịakọta na-arụ ọrụ dị iche iche maka ihe nchịkọta nhọrọ dị iche iche, biko rụtụ aka na ntuziaka ndị a.

Voltage ule

Voltage ngosi na itule (sel nke ọ bụla) Jikọọ ọdụ ụgbọ mmiri nguzozi nke batrị na MC8. Mgbe ngwaọrụ gbanyechara, ibe isi na-egosi voltage nke cell onye ọ bụla - dị ka egosiri n'okpuru:
Ogwe ndị nwere agba na-egosi voltage nke batrị graphically. The cell na kasị elu voltage na-egosipụta na-acha uhie uhie, ebe cell nwere obere voltage gosipụtara na-acha anụnụ anụnụ. Mkpokọta voltage na voltage iche (kachasị elu voltage- kacha nta voltage) egosiri n'okpuru. Na isi menu, pịa rola ihe karịrị 2 sekọnd ka ịmalite ọrụ itule. MC8 na-eji esịtidem resistors wepụta cell(s) ruo mgbe mkpọ ahụ ruru otu voltage n'etiti sel (<0.005V dị iche).

1. A na-ahazi ụlọ mmanya ndị ahụ maka LiPO, ọ bụghị eziokwu maka batrị nwere kemist ndị ọzọ.
2. Mgbe emezichara ngwugwu batrị ahụ, wepụ batrị na MC8 iji gbochie ịchaji oke.

Ngụkọta ngwugwu batrị voltage

Jikọọ ụzọ batrị na ọdụ ụgbọ mmiri XT60 bụ isi na MC8 iji gosipụta mkpokọta voltage nke ngwugwu batrị, dị ka egosiri n'okpuru.

1. MC8 na-egosiputa mkpokọta voltage nke kemịkalụ batrị niile na-arụ ọrụ n'ime oke ntinye .

Ntụnye mgbaàmà

1. Nleta akara PWM Mgbe ngwaọrụ gbanyechara, pịgharịa ozugbo na igwe igwe ka ịbanye ọnọdụ nha. E gosipụtara ibe ahụ dị ka ndị a.
   Nkọwa UI
   • PWM: Ụdị mgbaàmà
     1500:obosara usu PWM dị ugbu a
     20ms/5Hz: okirikiri ugbu a na ugboro PWM
   • Mgbe ị na-eji ọrụ nha mgbaàmà. Ọdụ ụgbọ mmiri mgbaàmà, ọdụ ụgbọ mmiri nguzozi na ọdụ ntinye isi nwere ike inye MC8 ike.
2. Nleta mgbama PPM N'okpuru ọnọdụ nha mgbaàmà PWM, pịa ala na akwụkwọ mpịakọta wee pịgharịa aka nri ruo mgbe egosiri PPM. Mgbe ahụ enwere ike tụọ mgbaàmà PPM, dị ka egosiri n'okpuru.
3. Nleta akara SBUS N'okpuru ọnọdụ nha mgbaàmà PWM, pịa ala na akwụkwọ mpịakọta wee pịgharịa aka nri ruo mgbe egosiri SBUS. Mgbe ahụ enwere ike tụọ akara ngosi SBUS, dị ka egosiri n'okpuru.

Mbupute mgbaàmà

1. Mbupute mgbaàmà PWM Na MC8 agbanyere, pịgharịa aka nri ugboro abụọ na rola iji banye ọnọdụ mmepụta. Pịa ala na akwụkwọ mpịakọta ahụ maka sekọnd 2 ka ịbanye na ọnọdụ mmepụta mgbaama, dịka egosiri n'okpuru. Nkọwa UI
   • Ọnọdụ ： Ụdị mmepụta mgbaàmà- enwere ike gbanwee n'etiti akwụkwọ ntuziaka na ụdị 3 akpaka nke ọsọ dịgasị iche iche.
   • Obosara: PWM mgbama mmepụta obosara usu, oke oke 1000us-2000us. Mgbe atọrọ ka ọ bụrụ akwụkwọ ntuziaka, gbanye ihe mmịfe mmepụta ọwa ka ịgbanwee obosara mgbaama mmepụta. Mgbe atọrọ na akpaaka, obosara mgbaama ga-abawanye ma ọ bụ belata ozugbo.
   • okirikiri: Usoro mmepụta mgbama PWM. Enwere ike idozi oke n'etiti 1ms-50ms.
   • Mgbe edobere okirikiri ka ọ na-erughị 2ms, obosara kachasị agaghị agafe uru okirikiri.
   • A na-echekwa ihe mmịfe nke ọwa na nchekwa. Agaghị enwe nsonaazụ mgbaama ruo mgbe ebu ụzọ weghachi ihe mmịfe ahụ n'ọnọdụ kacha nta.
2. Mbupute mgbaàmà PPM Site na ibe mmepụta PWM, pịa obere PWM iji gbanwee ụdị mmepụta; pịgharịa aka nri ruo mgbe egosipụtara PPM. Pịa dị mkpirikpi iji kwado nhọrọ PPM, dịka egosiri n'okpuru:
   Na ibe mmepụta PPM, pịa ala na rola maka 2 sekọnd iji tọọ uru mmepụta nke ọwa ọ bụla.
   1. Enwere ike ịchịkwa ọwa trottle naanị site na iji mgbama sitere na mmịfe mmepụta; enweghị ike ịgbanwe uru ahụ site na iji rola maka ihe nchekwa.
   2. Gbaa mbọ hụ na mmịfe mmepụta nọ n'ebe kacha ala tupu ịme ule ọ bụla.
3. Mbupute mgbaàmà SBUS Site na ibe mmepụta PWM, pịa obere PWM iji gbanwee ụdị mmepụta; pịgharịa aka nri ruo mgbe SBUS gosipụtara. Pịa dị mkpirikpi iji kwado nhọrọ SBUS, dịka egosiri n'okpuru:
   Na ibe mmepụta SBUS, pịa ala na rola maka 2 sekọnd iji tọọ uru mmepụta nke ọwa ọ bụla.
   1. Mgbe edobere okirikiri ka ọ na-erughị 2ms, obosara kachasị agaghị agafe uru okirikiri.
   2. A na-echekwa ihe mmịfe nke ọwa na nchekwa. Agaghị enwe nsonaazụ mgbaama ruo mgbe ebu ụzọ weghachi ihe mmịfe ahụ n'ọnọdụ kacha nta.

Nchaji USB

Ọdụ ụgbọ mmiri USB arụnyere n'ime ya na-enye onye ọrụ ohere ịkwụ ụgwọ ekwentị mgbe ọ na-aga. Ọdụ ụgbọ mmiri USB-A na-enye 5V 1A ebe ọdụ ụgbọ mmiri USB-C na-enye chaja ngwa ngwa 20W, na-eji usoro ndị a: PD3.0, QC3.0, AFC, SCP, FCP, wdg.

Mgbe ị na-anaji ngwaọrụ USB, jikọọ ọdụ ụgbọ mmiri mgbe niile. Mgbe cell onye ọ bụla ruru 3.0V ma ọ bụ n'okpuru, mmepụta USB ga-akwụsị igbochi mmebi batrị.

nhazi nhazi

Pịa ma jide rola mgbe ị na-agbanye ike na MC8 ka ịbanye n'ụdị nhazi, dị ka egosiri n'okpuru:

Tulee voltage nke ngwungwu batrị zuru ezu na-eji multimeter. Jiri rola ka ịhọrọ ntinye, wee pịgharịa ruo mgbe uru ahụ dabara nke a tụrụ na multimeter. Pịgharịa gaa na ala ka ịchekwaa wee pịa ala na rola ka ịchekwaa. Tinyegharịa usoro a maka cell onye ọ bụla ma ọ dị mkpa. Mgbe emechara, pịgharịa gaa na nhọrọ ọpụpụ wee pịa ala na rola ka ịmechaa nhazi ahụ.

• Ntinye: Voltage tụrụ na isi ọdụ ụgbọ mmiri XT60.
• 1-8: Voltage nke onye ọ bụla cell.
• ADCs: Uru izizi nke nhọrọ ahọpụtara tupu calib
• Ụzọ ọpụpụ: Wepụ ụkpụrụ mmezi
• Chekwa: Chekwa data mmezi
• Ebube: Laghachi na ntọala ndabara

Jiri naanị multimeter nwere izi ezi 0.001V iji rụọ nhazi. Ọ bụrụ na multimeter ezughị oke, emela nhazi nhazi.

Nkọwapụta

Izugbe	Isi ọdụ ụgbọ mmiri ntinye	XT60 7.0V-35.0V
	Ntinye nha nha	0.5V-5.0V Lixx 2-8S
	Ntinye ọdụ ụgbọ mmiri	<6.0V
	Nhazi ugbu a	Oke 60mA @2-8S
	Nhazi izi ezi	<0.005V @ 4.2V
	USB-A mmepụta	5.0V @ 1.0A nkwalite ngwa ngwa
	USB-C mmepụta	5.0V-12.0V @MAX 20W
	USB-C protocol	PD3.0 QC3.0 AFC SCP FCP
tụọ ment	PWM	500-2500us @20-400Hz
	PPM	880-2200us*8CH @20-50Hz
	SBUS	880-2200us * 16CH @20-100Hz
Mpụta	PWM	1000-2000us @20-1000Hz
	PPM	880-2200us*8CH @50Hz
	SBUS	880-2200us * 16CH @ 74Hz
Ngwaahịa	Nha	68mm * 50mm * 15mm
	Ibu	50g
ngwugwu	Nha	76mm * 60mm * 30mm
	Ibu	100g
LCD		IPS 2.0 inch 240*240 mkpebi

Akwụkwọ / akụrụngwa

ToolkitRC MC8 Cell Checker na Multi Tool with USB-C Fast Charging [pdf] Akwụkwọ ntuziaka onye ọrụ MC8, Cell Checker na Multi Tool with USB-C Fast Charging

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ