SmartGen HMC6000RM Njikwa nlekota anya

GỤKWUOVIEW

Onye na-ahụ maka HMC6000RM na-ejikọta digitization, ọgụgụ isi na teknụzụ netwọkụ nke a na-eji maka sistemụ nlekota anya nke otu unit iji nweta mmalite / nkwụsị akpaka, nha data, nchebe mkpu na ịlele ndekọ. Ọ dabara na ngosi 132*64 LCD, nhọrọ asụsụ Chinese / Bekee, ọ dịkwa mfe iji.

Arụmarụ na Àgwà

• 32-bit ARM microprocessor, 132 * 64 mmiri mmiri ngosi, nhọrọ Chinese / English interface, push-bọtịnụ arụ ọrụ;
• Jikọọ na HMC6000A/HMC6000A 2 modul site na ọdụ ụgbọ mmiri CANBUS iji nweta njikwa mmalite / nkwụsị;
• Site na ọnọdụ nyocha nke nwere ike nweta data nlele naanị mana ọ bụghị ijikwa injin ahụ.
• Nhazi modular, ihe mkpuchi plastik ABS na-ekpochapụ onwe ya na ụzọ ntinye agbakwunyere; obere size na kọmpat Ọdịdị na mfe arịọnụ.

TECHNICAL PARAMETERS

Oke	Nkọwa
Vol -arụ ọrụ Voltage	DC8.0V ruo DC35.0V, ọkụ ọkụ anaghị akwụsị akwụsị.
Oriri ike	<3W (Ụdị njikere: ≤2W)
Akụkụ ikpe	197mm x 152mm x 47mm
Mbelata panel	186mm x 141mm
Okpomọkụ na-arụ ọrụ	(-25-70) ºC
Iru mmiri na-arụ ọrụ	(20-93)% RH
Okpomọkụ nchekwa	(-25-70) ºC
Ọkwa nchekwa	Mpempe akwụkwọ IP55
Ike mkpuchi	Tinye AC2.2kV voltage n'etiti elu voltage ọnụ na ala voltage ọnụ; Ọpụpụ ugbu a agaghị agafe 3mA n'ime nkeji 1.
Ibu	0.45kg

INTERFACE

BANYERE UNU
A na-agụ data niile nke HMC6000RM n'aka onye njikwa mpaghara HMC6000A/HMC6000A 2 site na CanBUS. Ọdịnaya ngosi akọwapụtara na onye njikwa mpaghara na-anọ otu ihe ahụ.

OZI OZI

Mgbe ịpịrị Tinye maka 3s, onye njikwa ga-abanye n'ime nhọrọ interface nke ntọala paramita na ozi njikwa.	Weghachite ozi njikwa ntọala oke	Mgbe ahọpụtara ozi njikwa, pịa Tinye ka ịbanye na interface ozi njikwa.
Panel mbụ	Ụdị ngwanrọ njikwa ihe njikwa 2.0 Ụbọchị mwepụta 2016-02-10 2015.05.15（5）09:30:10	Ogwe a ga-egosipụta ụdị ngwanrọ, ụdị ngwaike na oge njikwa.   Pịa ịbanye na panel nke abụọ.
Ogwe nke abụọ	O:SFSHA 1 2 3 4 5 6 7 8 9 10 11 12 N'izu ike	Ogwe a ga-egosipụta ọkwa ọdụ ụgbọ mmiri, yana ọkwa genset.   Pịa ịbanye na panel nke atọ.
Ogwe nke atọ	I: ESS 1 2 0 F 3 4 5 6 N'izu ike	Ogwe a ga-egosipụta ọkwa ntinye ọdụ ụgbọ mmiri, yana ọkwa genset.   Pịa ịbanye na panel nke mbụ.

Ọrụ

Nkọwa ọrụ isi

Igodo	Ọrụ	Nkọwa
	Kwụsị	Kwụsị ịgbasa jenerato na ọnọdụ ime obodo.
	Malite	Malite genset n'ụdị ime ime.
	Ogbi	Gbanyụọ mkpu.
	Dimmer+	Gbanwee ọkụ azụ ka ọkụ, 6 ụdị lamp ọkwa nchapụta.
	Dimmer-	Gbanwee ọkụ azụ ka ọchịchịrị, 6 ụdị lamp ọkwa nchapụta.
	Lamp Nwalee	Pịa ya ga-anwale panel LED egosi na ihuenyo ngosi.
	Ụlọ	Laghachi na ihuenyo isi.
	Ụzọ mkpirisi Ndekọ mmemme	Tụgharịa ngwa ngwa gaa na ibe ndekọ mkpu.
	Elu/Mbawanye	1. Mpịakọta ihuenyo; 2. Up cursor na ụba uru na ntọala menu.
	Gbadata/belata	1. Mpịakọta ihuenyo; 2. Down cursor na ibelata uru na ntọala menu.
	Tọọ/Kwenye	1. Pịa na ijide ihe karịrị 3s iji tinye menu nhazi paramita; 2. Na ntọala menu na-akwado uru setịpụrụ.

Ogwe njikwa 

Mmalite/Kwụsị ọrụ

Ntụziaka
Hazie ọdụ ụgbọ mmiri ntinye inyeaka nke HMC6000A/HMC6000A 2 dị ka ntinye mmalite dịpụrụ adịpụ. Enwere ike ime mmalite/nkwụsị anya site na njikwa anya mgbe ọnọdụ ime obodo na-arụ ọrụ.

Usoro mmalite mmalite

1. Mgbe “Remote Start” na-arụ ọrụ, a na-amalite ngụ oge “Malite igbu oge;
2. "Malite igbu oge" ga-egosipụta na LCD;
3. Mgbe mmalite igbu oge agwụla, preheat relay na-enye ume (ọ bụrụ na ahaziri ya), ozi "Preheat Delay XX s" ga-egosipụta na LCD;
4. Mgbe igbu oge ahụ dị n'elu, a na-eme ka mmanụ ọkụ na-agba ume, na mgbe otu nkeji gachara, mmalite Relay na-arụ ọrụ. A na-agbaji injin ahụ maka oge edobere ya. Ọ bụrụ na injin ahụ ada ada ọkụ n'oge a cranking mgbalị mgbe mmanụ ụgbọala relay na mmalite relay na-wepụrụ maka tupu oge ezumike oge; "Oge ezumike crank" na-amalite ma chere maka mgbalị crank ọzọ;
5. Ọ bụrụ na usoro mmalite a na-aga n'ihu karịa ọnụọgụ nke mbọ, a ga-akwụsị usoro mmalite, a ga-egosipụta akara mbụ nke LCD ngosi na oji na 'Akwụsịghị ịmalite mmejọ' ga-egosipụta;
6. Ọ bụrụ na mbọ crank na-aga nke ọma, a na-agbanye ngụ oge “Safety On”. Ozugbo igbu oge a kwụsịrị, a na-amalite igbu oge "Malite Idle" (ọ bụrụ na ahaziri);
7. Mgbe mmalite na-abaghị uru, ọ bụrụ na Rotate Speed, Temperature, Oil Pressure of Controller na-emekarị, onye na-emepụta ọkụ ga-abanye n'ọnọdụ ịgba ọsọ nkịtị ozugbo.

Usoro nkwụsị nke dịpụrụ adịpụ

1. Mgbe mgbama “Nkwụsị Nkwụsị” ma ọ bụ “Kwụsị Ntinye” dị irè, a na-amalite igbu oge.
2. Ozugbo “Kwụsị igbu oge” a emebiela, “Kwụsị Idle” ga-amalite. N'oge igbu oge "Kwụsị Arụ Ọrụ" (ọ bụrụ na ahaziri), a na-enye ike ịgbagharị na-adịghị arụ ọrụ.
3. Ozugbo “Kwụsị Idle” a agwụla, “ETS Solenoid Hold” ga-amalite. A na-eme ka ETS relay ume ka a na-ebelata ike ịgbanye mmanụ ọkụ.
4. Ozugbo “ETS Solenoid Hold” a agwụla, “Akwụsịghị igbu oge” ga-amalite. A na-achọpụta nkwụsị zuru ezu na-akpaghị aka.
5. A na-etinye generator n'ime ọnọdụ njikere ya ka ọ kwụsịchara. Ma ọ bụghị ya, a na-amalite ịmalite ịkwụsị ịkwụsị ma gosipụta ozi mkpu kwekọrọ na LCD (Ọ bụrụ na generator kwụsịrị nke ọma mgbe mkpu "ọdịda ịkwụsị" amalitela, ọ ga-abanye na ọnọdụ njikere).

Ntọala Ntọala

Tinye n'ime ntọala ọnọdụ ọrụ mgbe ị na-pịa maka 3s mgbe njikwa amalitere.
2 Ụdị ọrụ:

• 0: Ọnọdụ nlekota: Mgbe HMC6000A/HMC6000A 2 nọ na ọnọdụ dịpụrụ adịpụ, onye njikwa ahụ nwere ike nweta data nleba anya na ndekọ ma ọ bụ mmalite/kwụsị anya.
• 1: Ọnọdụ onyunyo: Mgbe HMC6000A/HMC6000A 2 nọ na ọnọdụ dịpụrụ adịpụ, onye njikwa nwere ike nweta data nleba anya na ndekọ ma ọ bụghị mmalite/kwụsị anya.
  IHE: HMC6000RM nwere ike chọpụta ụdị njikwa isi, ntọala asụsụ yana ọnụego baud CANBUS.

Ogwe azụ azụ

Akara ngosi	Mba.	Ọrụ	Ogo USB	Nkọwa
	1.	Ntinye DC B-	1.0mm2	Ọkụ ọkụ DC ntinye adịghị mma. Ejikọtara na-adịghị mma nke Starter batrị.
	2.	Ntinye DC B+	1.0mm2	DC ike ọkọnọ nti ntinye. Ejikọtara na nti nke Starter batrị.
	3.	NC		Ejikọtaghị ya.
CANBUS (Mgbakwunye)	4.	KWURU	0.5mm2	Eji maka njikọ na HMC6000A/HMC6000A 2 mpaghara nlekota na njikwa modul. Iji waya mkpuchi 120Ω nke otu njedebe ya ka akwadoro.
	5.	Ike	0.5mm2
	6.	SCR	0.5mm2
Njikọ				Eji maka mmelite ngwanrọ.

CANBUS (Mgbakwunye) Mkparịta ụka ụgbọ ala

Enwere ike ijikọ HMC6000A/HMC6000A 2 iji nweta nleba anya anya site na ọdụ ụgbọ mmiri EXPANSION, nke nwere ike jikọọ na 16 HMC6000RM site na naanị ọdụ ụgbọ mmiri 1 EXPANSION iji nweta nlekota na njikwa n'otu oge n'ọtụtụ ebe.

Ịwụnye

IHE EKPERE
Onye njikwa bụ panel arụnyere n'ime imewe; A na-edozi ya site na obere vidiyo mgbe etinyere ya.

1. Weghachite skru clip na-edozi (tụgharịa na elekere elekere) ruo mgbe ọ ruru ọnọdụ kwesịrị ekwesị.
2. Dọrọ ndozi clip azụ azụ (n'azụ modul) hụ na mkpachị anọ dị n'ime oghere ekenyere ha.
3. Tụgharịa skru nke ndozi n'akụkụ elekere ruo mgbe edobere ha na panel.
   IHE: Ekwesịrị ịkpachapụ anya ka ị ghara imechi skru nke idozi mkpachị.

N'ozuzu akụkụ na ịkpụ

Nchọpụta nsogbu

Nsogbu	Ngwọta enwere ike
Onye njikwa enweghị nzaghachi na ike.	Lelee batrị mmalite; Lelee wiwi njikọ njikwa; Lelee fuse DC.
Ọdịda nzikọrịta ozi CANBUS	Lelee wiring; Lelee ma CANBUS CANH na CANL wires ejikọrọ n'ụzọ ọzọ; Lelee ma ọ bụrụ na CANBUS CANH na CANL wires na nsọtụ abụọ ejikọrọ n'ụzọ ọzọ; A na-atụ aro itinye resistor 120Ω n'etiti CANBUS CANH na CANL.

Ụgwọ nke ụlọ ọrụ SmartGen Technology Co., Ltd.
No.28 Jinsuo Road, Zhengzhou, Henan Province, China
Tel: +86-371-67988888/67981888/67992951
+ 86-371-67981000 (mba ofesi)
Fax: + 86-371-67992952
Web: www.smartgen.com.cn/
www.smartgen.cn/
Email: sales@smartgen.cn

Ikike niile echekwabara. Enweghị akụkụ nke akwụkwọ a nwere ike ịmegharị n'ụdị ọ bụla (gụnyere ịse foto ma ọ bụ chekwaa n'ụdị ọ bụla site n'ụzọ eletrọnịkị ma ọ bụ ihe ọzọ) na-enwetaghị ikike ederede nke onye nwe nwebisiinka. Ngwa maka ikike ederede nke onye nwe nwebiisinka ka imepụtagharị akụkụ ọ bụla nke akwụkwọ a kwesịrị ka etinyere ya na SmartGen Technology na adreesị dị n'elu. Ntụtụ aka ọ bụla gbasara aha ngwaahịa ejirila n'ime akwụkwọ a bụ nke ụlọ ọrụ ha nwe. Teknụzụ SmartGen nwere ikike ịgbanwe ọdịnaya nke akwụkwọ a na-enweghị ọkwa mbụ.

Akụkọ ụdị

Ụbọchị	Ụdị	Ọdịnaya
2015-11-16	1.0	Ntọhapụ izizi.
2016-07-05	1.1	Tinye ụdị HMC6000RMD.
2017-02-18	1.2	Megharịa voltaji arụ ọrụtage nso na tebụl nke teknuzu paramita.
2020-05-15	1.3	Gbanwee ụdị modul mpaghara jikọọ na HMC6000RM.
2022-10-14	1.4	Melite akara ụlọ ọrụ na usoro ntuziaka.

Ntuziaka akara

Banye aka	Ntuziaka
IHE	Na-akọwapụta ihe dị mkpa nke usoro iji hụ na o ziri ezi.
kpachara anya	Na-egosi ịrụ ọrụ na-ezighi ezi nwere ike ibute ngwa adịghị mma.

Akwụkwọ / akụrụngwa

	SmartGen HMC6000RM Njikwa nlekota anya [pdf] Akwụkwọ ntuziaka onye ọrụ HMC6000RM Onye njikwa nleba anya anya, HMC6000RM, njikwa nleba anya, njikwa nleba anya, njikwa
	SmartGen HMC6000RM Njikwa nlekota anya [pdf] Akwụkwọ ntuziaka onye ọrụ HMC6000RM.

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ