SKYDANCE ES-D Dual PIR Sensor Plus Onye njikwa bọtịnụ SPI Dual Push

Nkọwapụta

• Ntinye Voltage: 5-24VDC
• Ntinye ugbu a: 15A
• Akara ngosi: 2XSPI(TTL)
• Nọmba Pixel: Ihe mmetụta PIR Max 960 + bọtịnụ Push
• Akwụkwọ ikike: afọ 5
• Okpomọkụ arụ ọrụ: -30°C ruo +55°C
• Okpomọkụ ikpe (Max.): +65°C
• Ogo IP: IP20
• Nha ngwugwu: L175 x W120 x H35mm
• Mkpokọta nha: 0.27kg

Ntuziaka ojiji ngwaahịa

Ihe arụrụ arụ na nrụnye:
Soro eserese waya enyere maka nrụnye.

• Kwụpụ 1: Ngwa steepụ ọkụ nwere ihe mmetụta PIR
  Jikọọ ihe mmetụta PIR dịka eserese wiring maka agba ma ọ bụ njikwa ọkụ na-acha ọcha.
• Kwụpụ 2: Ngwa steepụ ọkụ nwere ihe mmetụta PIR
  Jikọọ ihe mmetụta PIR dị ka eserese wiring maka agba ma ọ bụ njikwa nzọụkwụ ọkụ ọcha.
• Kwụpụ 3: Njikwa ịgbanwee usoro
  Jikọọ otu mgba ọkụ na ọtụtụ njikwa maka njikwa mgbanwe usoro na-eso eserese wiring.

ES-D

Ihe mmetụta abụọ PIR + Onye njikwa bọtịnụ Push Dual SPI

• Igwe ihe mmetụta abụọ PIR + ntinye bọtịnụ okpukpu abụọ RGB ma ọ bụ onye na-ahụ maka ọkụ SPI nwere ihe mmetụta ìhè ụbọchị.
• Otu abụọ otu SPI (TTL) mmepụta mgbaama, ụgbọala 28 ụdị IC dijitalụ RGB ma ọ bụ ọcha LED strip, IC ụdị, na R/G/B iji nwere ike ịtọ.
  ICs dakọtara:
  TM1804, TM1809, TM1812, UCS1903, UCS1909, UCS1912, UCS2903, UCS2909, UCS2912, WS2811, WS2812, TM1829, TM1914A, GW6205, GS8206, GS8208, LPD6803, LPD1101,D705, UCS6909, UCS6912, LPD8803, LPD8806, WS2801, WS2803, P9813, SK9822, SM16703
• Mgbe etinyere ya na ọkụ steepụ, na-akwado ụdị mmepụta anọ: ụcha agba, anụ ọhịa ọcha, steepụ agba, na nzọ ụkwụ ọcha.
• A na-enweta njikwa mgbanwe usoro n'usoro mgbe ejikọtara ọtụtụ njikwa SPI na otu bọtịnụ ngbanwe nke na-emegharị onwe ya.
• A na-ahọpụta ọtụtụ agba ọkụ na ụdị mgbanwe na ọsọ na nchapụta.

Nka nka

Ihe arụrụ arụ na nrụnye

Eserese waya

1. Ngwa ọkụ steepụ, jikọọ na ihe mmetụta PIR, agba ma ọ bụ njikwa ọkụ na-acha ọcha
2. Ngwa ọkụ steepụ, jikọọ na ihe mmetụta PIR, agba ma ọ bụ njikwa nzọụkwụ ọcha
3. Otu mgba ọkụ ọkụ na-ejikọta ya na ọtụtụ njikwa maka njikwa mgbanwe usoro

Mara: 

1. Ọ bụrụ na SPI LED strip bụ usoro njikwa otu waya, ntinye akara akara DATA na CLK nke onye njikwa bụ otu, otu onye njikwa nwere ike jikọọ eriri LED anọ.
2. Ọ bụrụ na SPI LED strip bụ usoro njikwa waya abụọ, otu onye njikwa nwere ike jikọọ ibe LED abụọ.
3. Mgbe ibu warara SPI agaghị agafe 15A, otu ọkụ ahụ nwere ike ime ka onye na-ahụ maka ES-D na eriri SPI n'otu oge.
   Mgbe ibu dị na warara SPI gafere 15A, a na-achọrọ ike dị iche iche maka njikwa ES-D na warara SPI.
   Naanị ahịrị mgbama DATA na GND ka ejikọrọ n'etiti njikwa ES-D na warara SPI.
4. Enwere ike dochie ihe mmetụta PIR na ihe mmetụta ntụgharị uche infrared steepụ (ES-T) ma ọ bụ ihe mmetụta ndị ọzọ na-emepụta akara ọkwa 5V.
5. Ụdị agba agba ma ọ bụ na-acha ọcha nwere ike ijikwa ihe ruru 960-pixel nke warara SPI.
6. Ụdị nzọụkwụ nke agba ma ọ bụ ọcha na-adabara nzọụkwụ 30 yana 10 pikselụ kwa steepụ. Ogologo nzọụkwụ x pikselụ n'ogologo ga-abụrịrị ≤ 960.

Ntọala ntọala

Ogologo oge pịa igodo M na ◀ maka 2s n'otu oge, wee tinye ọnọdụ ntọala ọkụ ọkụ: tọọ ụdị ọkụ, na ọnọdụ njikọ eriri LED (nrịba ma ọ bụ nzọụkwụ). Ogologo pikselụ, nọmba nzọụkwụ, ọnọdụ ịgbanwuo/ gbanyụọ, ihe mmetụta gbanyụọ oge igbu oge, nchọpụta ìhè ehihie, ngbanwe nke nrụpụta onwe ya ma ọ bụ gbanyụọ oge igbu oge.

1. Ịdị nke ọkụ
   Mkpirisi pịa igodo M ka ịbanye na interface ntọala ụdị ọkụ;
   Pịa mkpirisi ◀ ma ọ bụ ▶ igodo iji gbanwee ụdị ọkụ.3-ọkụ ọcha bead: 1 pikselụ nwere 3 otu data, akara 3-bead ọcha LED, ngosi "L-1".
   1-ọkụ ọcha bead: 1 pikselụ nwere data 1, njikwa 1-bead ọcha LED, ngosipụta "L-2".
   Ìhè agba RGB: 1 pikselụ nwere data 3, jikwaa otu LED R/G/B, ngosipụta “L-3”.
2. Ọnọdụ njikọ eriri eriri LED
   Mkpirisi pịa igodo M ka ịbanye n'ụdị ntọala njikọ njikọ eriri LED;
   Pịa mkpirisi igodo ◀ ma ọ bụ ▶ ka ịgbanwee ọnọdụ njikọ eriri LED.Ụdị usoro: Ahịrị kwụ ọtọ dijitalụ pikselụ LED eriri njikọ eriri, gosi “oL”.
   Ụkpụrụ nzọụkwụ: Ụdị njikọ eriri ọkụ pikselụ dijitalụ ụdị Z, gosi “oS”.
3. Ntọala ogologo Pixel
   Mkpirisi pịa igodo M ka ịbanye na interface ntọala ogologo pikselụ;
   Pịa mkpirisi igodo ◀ ma ọ bụ ▶ ka ịtọ ogologo pikselụ.Ogologo Pixel:
   Maka ụdị agba agba ma ọ bụ na-acha ọcha, tọọ ọnụọgụ pikselụ, oke ahụ bụ 032-960, wee gosipụta “032”-“960”.
4. Nọmba nzọụkwụ na nhazi ogologo pikselụ nzọụkwụ
   Mkpirisi pịa igodo M ka ịbanye na interface ntọala nọmba nzọụkwụ;
   Pịa mkpirisi igodo ◀ ma ọ bụ ▶ ka ịtọọ nọmba nzọụkwụ.
   Mkpirisi pịa igodo M ka ịbanye n'usoro ntọala ogologo pikselụ;
   Pịa igodo ◀ ma ọ bụ ▶ dị mkpirikpi ka ịtọ ogologo pikselụ nzọụkwụ.Nọmba nzọụkwụ na ogologo pikselụ nzọụkwụ:
   Maka agba ma ọ bụ ọnọdụ nzọ ụkwụ na-acha ọcha, tọọ ọnụọgụ nzọụkwụ na ọnụọgụ pikselụ nke nzọụkwụ ọ bụla. Nzọụkwụ nọmba: nso bụ 8-99, ngosi "S08"-"S99";
   Nọmba ntụpọ Pixel nke nzọụkwụ ọ bụla: oke ahụ bụ 2-99, ngosipụta "L02"-"L99".
   Nọmba nzọụkwụ x pixel ntụpọ nke nọmba nzọụkwụ ọ bụla ga-≤ 960.
5. Ntọala ngbanwu/ gbanyụọ ọnọdụ ọkụ (ya bụ, tọọ ihe mmetụta na-arụ ọrụ yana bọtịnụ nrụpụta onwe ya ka ịgbanwuo ma ọ bụ gbanyụọ ọnọdụ ọkụ (Table 1)
   Mkpirisi pịa igodo M ka ịbanye ọkụ na interface ntọala;
   Pịa mkpirisi ◀ ma ọ bụ ▶ igodo iji gbanye ọkụ abụọ na ọnọdụ:
   Ọkụ n'usoro na:
   Ìhè ahụ na-agbanye n'usoro site na mmalite ruo na njedebe, na-egosipụta "onS". Ọkụ emekọrịtara ọnụ na:
   Ìhè ahụ na-agbanye n'otu oge, wee gosipụta "onC" .
   Pịa mkpirisi igodo M ka ịbanye n'ime oghere ngbanwe;
   Pịa mkpirisi igodo ◀ ma ọ bụ ▶ ka ịgbanyụ ọnọdụ ọkụ atọ:
   Agbanyụrụ ọkụ n'usoro:
   Ìhè ahụ na-agbanyụ n'usoro site na mmalite ruo na njedebe, na-egosipụta "oFS". Gbanyụọ ọkụ n'usoro na azụ: Ìhè ahụ na-agbanyụ n'usoro site na nsọtụ ruo na mmalite, na-egosipụta "oFb". Gbanyụọ ọkụ mekọrịtara ọnụ: ọkụ ahụ na-agbanyụ n'otu oge, wee gosipụta “oFC” .Ndepụta ụzọ isi gbanye/ gbanyụọ nchikota ọkụ:

   Ngosipụta	Aha
   onS + oFS	Ọkụ n'usoro agbanwuru, ọkụ usoro agbanyụrụ
   onS + nke Fb	Ọkụ n'usoro agbanwuru, ọkụ azụ n'usoro agbanyụrụ
   onS + oFC	Ọkụ n'usoro agbanyere, ọkụ mekọrịtara ọnụ
   onC + oFS	Ọkụ mekọrịtara ọnụ, agbanyụrụ ọkụ n'usoro
   onC + nke Fb	Ọkụ mekọrịtara ọnụ, agbanyụrụ ọkụ azụ n'usoro
   onC + oFC	Ọkụ mekọrịtara ọnụ gbanyụrụ ọkụ

6. Ntọala nkwụsị oge ihe mmetụta
   Mkpịpị igodo M, tinye igbu oge ihe mmetụta gbanyụọ interface ntọala oge;
   Pịa mkpirisi igodo ◀ ma ọ bụ ▶ ka ịgbanwee oge igbu oge 10.Sensọ igbu oge n'oge:
   5sec (d05), 10sk (d10), 30sk (d30), 1min (01d), 3min (03d), 5min (05d), 10min (10d), 30min (30d), 60min (60d), ịkagbu (d00), ịtọ kagbuo pụtara ghara ịgbanyụ ọkụ.
7. Ntọala nchọpụta ìhè ehihie
   Pịa mkpirisi igodo M ka ịbanye interface ntọala nchọpụta ìhè ehihie;
   Pịa mkpirisi igodo ◀ ma ọ bụ ▶ ka ịgbanwee ọkwa isii nke nchọpụta ìhè ụbọchị.Nchọpụta ìhè ehihie:
   Tọọ ụzọ nchọpụta ìhè (ọkwa 6):
   10Lux (Lu1), 30Lux (Lu2), 50Lux (Lu3), 100Lux (Lu4), 150Lux (Lu5), 200Lux (Lu6), Gbanyụọ (LoF). Nchọpụta nhụta ọkụ nke ụlọ ọrụ agbanyụla (LoF).
   Mgbe nchọpụta mmetụta ọkụ na-agbanye, uche PIR na-agbanye naanị ọkụ
   mgbe ọkụ ambient dị ala karịa uru ọnụ ụzọ.
8. Gbanyụọ ma ọ bụ gbanyụọ ngbanwe ntinye nke ntọgharị onwe ya
   Mkpirikpi pịa igodo M tinye mgba ọkụ ntugharị gbanye ihe nhazi oge igbu oge ọkụ;
   Pịa mkpirisi igodo ◀ ma ọ bụ ▶ ka ịtọọ oge igbu oge.
   Mkpirisi pịa M, tinye mgbanyụ ọkụ gbanyụọ nrụnye nhazi oge igbu oge;
   Pịa mkpirisi igodo ◀ e r ▶ ka ịtọọ oge igbu oge.Mgbanwe ntinye ntọgharị onwe ya gbanye oge igbu oge:
   Ntọala nso 0-15.5s, nkeji kacha nta 0.5s, ngosipụta “o00”-“o95”-“oF5”, AF na-egosi na 10-15s.
   Ịtọ ntọala 0s pụtara ịgbanye ọkụ ozugbo.
   Mgbanwe ntinye nrụpụta nke onwe na-agbanyụ oge igbu oge:
   Ntọala nso 0-15.5s, nkeji kacha nta 0.5s, ngosipụta “c00”-“c95”-“cF5”, AF na-egosi na 10-15s.
   Ịtọ ntọala 0s pụtara ịgbanyụ ọkụ ozugbo.

Ogologo oge pịa igodo M na ▶ maka 2s n'otu oge, ma tinye akara ntọala LED warara steeti: tọọ ụdị mgbawa na usoro agba RGB.

1. Mpempe akwụkwọ
   Short M igodo na-abanye na interface ntọala ụdị mgbawa;
   Pịa mkpirisi ◀ ma ọ bụ ▶ igodo iji gbanwee ụdị mgbawa (Table 2).Ndepụta ụdị LED strip IC:

   Mba.	Ụdị IC	Ụdị IC dakọtara	Mgbama mmepụta
   C11	TM1809	TM1804,TM1812,UCS1903,UCS1909, UCS1912, UCS2903,UCS2909,UCS2912, WS2811, WS2812, SM16703P	DATA
   C12	TM1829		DATA
   C13	TM1914A		DATA
   C14	GW6205		DATA
   C15	GS8206	GS8208	DATA
   C21	LPD6803	LPD1101,D705,UCS6909,UCS6912	DATA, CLK
   C22	LPD8803	LPD8806	DATA, CLK
   C23	WS2801	WS2803	DATA, CLK
   C24	P9813		DATA, CLK
   C25	SK9822		DATA, CLK

2. Ntọala ịtụ agba RGB
   Mkpirisi pịa M ka ịbanye n'usoro ntọala RGB;
   Pịa mkpirisi igodo ◀ ma ọ bụ ▶ ka ịgbanwee usoro R/G/B (Table 3).Usoro agba agba LED strip RGB:

   R/G/B ịtụ	RGB	RBG	GRB	GBR	BRG	BGR
   Ngosipụta dijitalụ	0-1	0-2	0-3	0-4	0-5	0-6

3. Kwụsị ntọala oke.
   Ogologo pịa igodo M maka 2s ma ọ bụ chere 15, ma kwụsị ọnọdụ ntọala paramita.

Ntọala mmetụta ọkụ

1. Ntọala agba ọkụ
   Pịa obere igodo ◀ ka ịgbanwee agba ọkụ 10 n'usoro (Table 4).
2. Ụdị mgbanwe ọkụ
   Pịa mkpirisi igodo ▶ ka ịgbanwee ụdị mgbanwe ọkụ 5 n'usoro (Table 5).
3. Ntọala oke mmetụta ọkụ (ya bụ, ọsọ, nchapụta, agba R/G/B akọwapụtara onwe)
   Mkpirisi pịa igodo M ka ịgbanwee ihe oke atọ;
   Pịa mkpirisi igodo ◀ ma ọ bụ ▶ ka ịhazie uru nke ihe oke ọ bụla.
   Ọsọ, nchapụta na nkọwapụta oke agba agba R/G/B nke akọwapụtara onwe ya:
   Ọsọ: 1-8 ọkwa mgbanwe, ngosi "S-1"-"S-8", S-8 bụ kacha ọsọ.
   Icha ọkụ: 1-10 larịị mgbanwe, ngosi "b10"-"bFF", bFF pụtara kacha nchapụta 100%. Agba R/G/B nke akọwapụtara onwe ya: 0-255 (00-FF) nwere ike idozi.
   Ọwa R na-egosiputa "100"-"1FF"; G na-egosiputa "200" - "2FF"; Ọwa B na-egosiputa "300"-"3FF".
4. Kwụsị ntọala oke mmetụta ọkụ.
   Ogologo pịa igodo M maka 2s ma ọ bụ chere 15, ma kwụsị ọnọdụ ntọala oke mmetụta ọkụ.
   

Mara:

1. Ọnọdụ nrịba ọcha / ọcha anaghị akwado ọrụ agba R/G/B kọwapụtara onwe ya.
2. Maka ọnọdụ agba agba / agba agba, agbakọ ọkụ na ụdị mgbanwe ọkụ na-etolite ụdị mmetụta ọkụ 50.
3. N'ihi na agba agba / agba nzọụkwụ / ọcha eruba / ọcha nzọụkwụ mode, nwere ike gbanwee na ọsọ na nchapụta.

Ntọala paramita ụlọ nrụpụta

• Pịa ogologo ◀ na ▶ igodo maka 2s n'otu oge, weghachi paramita ndabara ụlọ nrụpụta, wee gosipụta “RES”.
• Ntọala ndabara nke ụlọ ọrụ: mmepụta ọkụ agba RGB, pikselụ 300, ọkụ usoro ọkụ, ọkụ ọkụ n'usoro, gbanyụọ oge 30s, gbanyụọ nchọpụta ìhè ehihie, igbanye nkwụsịtụ ịgbanyụ oge na gbanyụọ igbu oge bụ 0s, ụdị mgbawa TM1809, usoro RGB.

Ụdị agba (ọnụọgụ abụọ):

Mba.	Aha
0	Rxxx Gxxx Bxx (x User de ne)
1	Uhie
2	oroma
3	Odo
4	Akwụkwọ ndụ akwụkwọ ndụ
5	Cyan
6	Acha anụnụ anụnụ
7	Purple
8	R/G/B 3 agba
9	7 agba

Ụdị mgbanwe agba/ọcha (ọnụọgụ atọ):

Mba.	Aha
1	Efere
2	Chọọ
3	Fee n'elu
4	Ụzọ
5	Ụzọ ụzọ+ ngalaba ojii

Ngwa a na-ahụkarị

1. Nhụta PIR abụọ
   Jikọọ ihe mmetụta PIR abụọ iji ghọta njikwa ọkụ steepụ akpaka.
   A na-etinye ihe mmetụta UP PIR na ala nke steepụ, mgbe ị na-ahụ mmadụ, tube dijitalụ na-egosipụta ozugbo "-u-", ọkụ na-agbanye na-akpaghị aka, na-agbanyụ ọkụ na-egbu oge.
   A na-etinye ihe mmetụta DW PIR n'elu steepụ, mgbe ị na-ahụ mmadụ, tube dijitalụ na-egosipụta ozugbo "-d-", ọkụ na-agbanye na-akpaghị aka, na-agbanyụkwa ọkụ na-egbu oge.
   Ọ bụrụ n'itinye nchọpụta ihe mmetụta ìhè ehihie, a ga-agbanye ọkụ naanị na gburugburu gbara ọchịchịrị ma ọ bụ n'abalị.
2. Ihe ngbanwe ngbanwe ihe nrụgharị onwe ya abụọ
   Jikọọ ọkụ ọkụ steepụ abụọ maka njikwa aka.
   A na-etinye mgba ọkụ UP push na ala nke steepụ; a na-etinye ihe ngbanwe nke DW n'elu steepụ.
   Tọọ mgba ọkụ nrụgharị nke onwe ka ọ bụrụ 0s maka ma ọkụ na-egbu oge yana ịgbanyụ ọkụ.
   Mkpirisi pịa mgba ọkụ nrụgharị nke onwe iji gbanye ọkụ, gosipụta ọnọdụ mmetụta ọkụ dị ugbu a;
   mkpirisi pịa mgba ọkụ nke nrụgharị onwe ya ọzọ, gbanyụọ ọkụ, wee gosipụta “gbanyụọ”.
   Ogologo oge pịa UP onwe-tọgharịa push mgba ọkụ iji mezie nchapụta, nso 10-100%, dijitalụ tube ngosi "b10"-"bFF". Mara: Igwe ngbanwe nke nrụpụta onwe nke DW enweghị ọrụ nke ịhazigharị nchapụta.
   Iji njikwa ngbanwe ngbanwe nke ntọgharị onwe ya ga-eleghara nchọta uche nke ìhè ehihie anya.
3. Mgbanwe ntọgharị onwe na-ejikọ ọtụtụ njikwa maka njikwa mgbanwe usoro.
   A na-ejikọta ọtụtụ njikwa na otu ma ọ bụ abụọ push switches n'otu oge iji ghọta usoro mgbanwe mgbanwe usoro.
   Tọọ oge ịgbanwuo/gbanyụọ oge igbu oge nke ọtụtụ njikwa ka ọ bụrụ ụkpụrụ abawanye ma ọ bụ decremental, maka ex.ampLe:
   setịpụ ọkụ 1-4 # ndị na-ahụ maka ịgbanye ọkụ na oge igbu oge gaa na 0s, 1s, 2s, 3s, ma gbanye ọkụ gbanyụọ oge igbu oge na 3s, 2s, 1s, 0s n'otu n'otu. N'ụzọ dị otú a, 1-4 # ndị na-achịkwa ga-agbanye ọkụ n'otu usoro ahụ, ma gbanyụọ ọkụ na ntụgharị azụ.
   Mkpirisi pịa mgba ọkụ nrụgharị nke onwe ka ịgbanwuo ọkụ n'usoro. N'oge ọkụ na-egbu oge, ngosi dijitalụ "don".
   Mgbe ọkụ na-agbanyere, gosi ọnọdụ ike ọkụ dị ugbu a.
   Mkpirisi pịa mgba ọkụ nke nrụpụta nrụpụta onwe ya ka ịgbanyụ ọkụ n'usoro. N'oge ọkụ na-egbu oge, ihe ngosi dijitalụ "doF".
   Mgbe ọkụ gbanyụrụ, ihe ngosi dijitalụ bụ “gbanyụọ”.

Mara:

• Mgbe mmetụta ọkụ nke ọtụtụ njikwa na-enwe mgbagwoju anya, enwere ike iweghachi ya ngwa ngwa site na ịpị okpukpu abụọ nke nrụgharị ntinye onwe ya.
• Iji ngbanwe ntọgharị onwe ya iji jikwaa ọtụtụ njikwa ga-eleghara ntọala nhụta oge nkwụsịtụ na ìhè ụbọchị.

Ntinye nke ihe mmetụta PIR

Ọkwa maka ntinye nke ihe mmetụta PIR

1. Akwadoro maka mgbanye mgbidi.
2. Ọ bụrụ na ekpughere ihe mmetụta ahụ na ìhè anyanwụ kpọmkwem, a ga-ewebata mgbaàmà nnyonye anya.
3. Ekwesịrị itinye ihe mmetụta n'ime ebe kpọrọ nkụ ma debe ya na windo, ntụ oyi, na fan.
4. Jide n'aka na ihe mmetụta ahụ na-anọ n'ebe na-enweghị ihe onwunwe dị ka countertops, ngwa kichin na-emepụta uzuoku ọkụ, mgbidi, na windo na ìhè anyanwụ kpọmkwem, ikuku oyi, kpo oku, friji, stovu, na ihe ndị ọzọ.
5. Anyị na-akwado mgbidi nrụnye mgbidi dị elu bụ 1-1.5 mita na elu ụlọ elu adịghị elu karịa mita 3.
6. E kwesịghị inwe ebe nchekwa (ihuenyo, arịa ụlọ, nnukwu bonsai) n'ime oke nchọpụta.

Ndepụta nkwakọ ihe

Ajụjụ a na-ajụkarị

• Ajụjụ: Gịnị bụ oge ikike maka ngwaahịa?
  A: Ngwaahịa a na-abịa na akwụkwọ ikike afọ 5.
• Ajụjụ: Gịnị bụ oke okpomọkụ na-arụ ọrụ nke ngwaahịa?
  A: Ngwaahịa nwere ike ịrụ ọrụ na okpomọkụ sitere na -30 ° C ruo + 55 ° C.
• Ajụjụ: Gịnị bụ ọnụọgụ pikselụ kacha nke ngwaahịa a kwadoro?
  A: Ngwaahịa a na-akwado kacha nke 960 PIR sensọ + Ntinye nọmba pikselụ bọtịnụ.

Akwụkwọ / akụrụngwa

SKYDANCE ES-D Dual PIR Sensor Plus Onye njikwa bọtịnụ SPI Dual Push [pdf] Akwụkwọ ntuziaka onye nwe ES-D, ES-D-1, ES-D Dual PIR Sensor Plus Dual Push Button SPI Controller, ES-D, Dual PIR Sensor Plus Dual Push Button SPI Controller, Dual Push Button SPI Controller, Push Button SPI Controller, Button SPI Controller

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ