novation Mwepụta Control Xl Programmer
Mepee ntuziaka ntụnye aka nke mmemme Control XL
Ozi ngwaahịa
Mwepụta Control XL bụ onye njikwa MIDI nwere ọkụ ikanam nke enwere ike ịhazi ya site na protocol abụọ dị iche iche: ụkpụrụ Launchpad MIDI ọdịnala na Protocol Mwepụta Control XL System Exclusive. Enwere ike ịtọ ọkụ ọkụ LED ka ọ bụrụ ọkwa nchapụta anọ dị iche iche ma enwere ike ijikwa ya site na iji Detuo na Clear bits maka nchikota okpukpu abụọ.
Eji ngwaahịa
Iji tọọ ọkụ LED na Mwepụta Control XL, ị nwere ike iji ma Launchpad MIDI protocol ma ọ bụ Mwepụta Control XL System Exclusive protocol.
MIDI Protocol Launchpad
Ọ bụrụ na ị na-eji Protocol MIDI Launchpad, ịkwesịrị ịhọrọ ndebiri nwere bọtịnụ nke ndetu/CC na ọwa MIDI dabara na ozi mbata. Iji tọọ ọkụ ikanam, ziga ozi na otu ihe owuwu byte nke gụnyere ọkwa nchapụta nke ma red na green LEDs, yana ọkọlọtọ Detuo na Clear.
Ọdịdị Byte:
- Bit 6: Kwesịrị ịbụ 0
- Bits 5-4: Ọkwa nchapụta ọkụ nke Green LED (0-3)
- Bit 3: Kpochapụ ọkọlọtọ (1 iji kpochapụ nnomi nke LED ọzọ)
- Bit 2: Detuo ọkọlọtọ (1 iji dee data LED na nchekwa abụọ ahụ)
- Bits 1-0: Ọkwa nchapụta ọkụ LED (0-3)
Enwere ike ịtọ LED ọ bụla ka ọ bụrụ otu n'ime ọkwa nchapụta anọ:
- Icha ọkụ 0: Gbanyụọ
- Icha ọkụ 1: Nchapụta dị ala
- Icha ọkụ 2: Ọkara nchapụta
- Icha ọkụ nke atọ: nchapụta zuru oke
Ọ bụ omume dị mma idobe ọkọlọtọ Detuo na Kpochapụ mgbe ị na-agbanye ọkụ ma ọ bụ gbanyụọ ọkụ ma ọ bụrụ na ejighị njirimara nkpuchi okpukpu abụọ.
Iji gbakọọ ọnụ ahịa ọsọ, jiri usoro a:
- Ụdị hex: Ọsọ ọsọ = (10h x Green) + Red + Flags
- Ụdị ọnụọgụgụ: Ọsọ ọsọ = (16 x Green) + Red + Flags
- Ọkọlọtọ = 12 (OCh na hex) maka ojiji nkịtị; 8 iji mee ka ọkụ ọkụ LED, ma ọ bụrụ na ahazi ya; 0 ma ọ bụrụ na-eji okpukpu abụọ.
Mwepụta Control XL System Exclusive Protocol
Ọ bụrụ na ị na-eji Protocol Mwepụta Control XL System Exclusive, bọtịnụ achọrọ ga-emelite n'agbanyeghị uru ndetu/CC ma ọ bụ ọwa MIDI. Iji tọọ ọkụ ikanam, ziga ozi nwere nhazi otu-byte nke gụnyere ọkwa nchapụta nke ma red na green LEDs, yana ọkọlọtọ Detuo na Clear.
Ọdịdị Byte:
- Bit 6: Kwesịrị ịbụ 0
- Bits 5-4: Ọkwa nchapụta ọkụ nke Green LED (0-3)
- Bit 3: Kpochapụ ọkọlọtọ (1 iji kpochapụ nnomi nke LED ọzọ)
- Bit 2: Detuo ọkọlọtọ (1 iji dee data LED na nchekwa abụọ ahụ)
- Bits 1-0: Ọkwa nchapụta ọkụ LED (0-3)
Enwere ike ịtọ LED ọ bụla ka ọ bụrụ otu n'ime ọkwa nchapụta anọ:
- Icha ọkụ 0: Gbanyụọ
- Icha ọkụ 1: Nchapụta dị ala
- Icha ọkụ 2: Ọkara nchapụta
- Icha ọkụ nke atọ: nchapụta zuru oke
Jikwaa nchekwa ugboro abụọ
Mwepụta Control XL na-egosipụtakwa ihe nchekwa abụọ maka ọkụ ọkụ. Iji jiri nchikota okpukpu abụọ, zipu ozi nchikota njikwa okpukpu abụọ nwere uru 0 iji gbanye ya ma ọ bụ 1 iji gbanyụọ ya. Mgbe ị na-eji nchikota okpukpu abụọ, a ga-eji ọkọlọtọ Detuo na Kpochapụta iji megharịa ihe nchekwa a na-ede na ya.
Okwu mmalite
- Akwụkwọ ntuziaka a na-akọwa usoro nzikọrịta ozi MIDI njikwa XL. Nke a bụ ozi niile ịchọrọ iji nwee ike ide patches na ngwa ahaziri maka Mwepụta Control XL.
- A na-eche na ị nwetalarị ihe ọmụma bụ isi nke MIDI, yana ụfọdụ ngwanrọ dabara adaba maka ide ngwa MIDI mmekọrịta (maka ndị mbụ.ample, Max maka Live, Max/MSP, ma ọ bụ data dị ọcha).
- Enyere ọnụọgụgụ dị na akwụkwọ ntuziaka a na hexadecimal na nkeji iri. Iji zere enweghị mgbagha ọ bụla, ọnụọgụ hexadecimal na-esochi obere obere h.
Mwepụta Control XL MIDI Overview
- Mwepụta Control XL bụ ngwaọrụ USB nke na-akwado klaasị nke nwere ite 24, fader 8 na bọtịnụ mmemme 24. Bọtịnụ 'ọwa' iri na isii nke ọ bụla nwere LED nwere agba agba nwere ihe na-acha uhie uhie na ihe na-acha akwụkwọ ndụ akwụkwọ ndụ; ìhè sitere na ihe ndị a nwere ike ịgwakọta ka ọ bụrụ amber. Bọtịnụ ntụzịaka anọ nke ọ bụla nwere otu LED na-acha uhie uhie. Bọtịnụ 'Ngwaọrụ', 'Mute', 'Solo' na 'Record Arm' nke ọ bụla nwere otu LED edo edo. Mwepụta Control XL nwere ndebiri 16: ndebiri onye ọrụ 16, nke enwere ike gbanwee, yana ndebiri ụlọ ọrụ 8, nke enweghị ike. Ndebiri onye ọrụ nwere oghere 8h00h (07-0), ebe ndebiri ụlọ ọrụ nwere oghere 7-08Fh (0-8). Jiri Mwepụta Control XL Editor (dị na Novation websaịtị) iji gbanwee ndebiri onye ọrụ gị 8.
- Mwepụta Control XL nwere otu ọdụ ụgbọ mmiri MIDI aha ya bụ 'Mwepụta Control XL n', ebe n bụ njirimara ngwaọrụ nke unit gị (egosighi maka ID ngwaọrụ 1). Enwere ike ijikwa LEDs bọtịnụ maka ndebiri ọ bụla site na ozi naanị Sistemụ. N'aka nke ọzọ, bọtịnụ LEDs maka ndebiri ahọpụtara ugbu a nwere ike ijikwa site na ozi MIDI note-on, note-off, and control (CC) ozi, dị ka ụkpụrụ Launchpad mbụ siri dị.
- Mwepụta Control XL na-eji usoro naanị usoro iji melite steeti bọtịnụ ọ bụla na ndebiri ọ bụla, n'agbanyeghị ụdị ndebiri ahọpụtara ugbu a. Iji nọgide na-enwe ndakọrịta na Launchpad na Launchpad S, Mwepụta Control XL na-agbasokwa usoro iwu ọkụ ọkụ Launchpad omenala site na ndetu-on, note-off na CC ozi. Agbanyeghị, a ga-eme ụdị ozi ahụ naanị ma ọ bụrụ na ndebiri ahọpụtara ugbu a nwere bọtịnụ/ite nke uru ndetu/CC na ọwa MIDI dabara na nke ozi mbata. Ya mere a na-adụ ndị ọrụ ọdụ ka ha nabata usoro iwu naanị Sistem.
- Na mgbakwunye, Mwepụta Control XL na-akwadokwa mbido Launchpad mbụ okpukpu abụọ, na-egbuke egbuke na setịpụ-/tọgharịa-ozi LED niile, ebe ọwa MIDI nke ozi na-akọwapụta ndebiri nke ezubere ozi ahụ. Enwere ike izipu ozi ndị a n'oge ọ bụla, n'agbanyeghị ụdị ndebiri ahọpụtara ugbu a.
- A na-echekwa ọnọdụ nke LED ọ bụla mgbe a gbanwere template ahụ, a ga-echetakwa ya mgbe ahọpụtara template ahụ. Enwere ike imelite LED niile na ndabere site na SysEx.
Ozi-na-ngwaọrụ ozi
Enwere ike ịtọ LEDs na Mwepụta Control XL site na usoro abụọ dị iche iche: (1) usoro omenala Launchpad MIDI, nke chọrọ template ahọpụtara ugbu a ka ọ nwee bọtịnụ nke ndetu/CC na ọwa MIDI kwekọrọ na ozi mbata; na (2) Mwepụta Control XL System Exclusive protocol, nke ga-emelite bọtịnụ achọrọ n'agbanyeghị uru ndetu/CC ma ọ bụ ọwa MIDI.
Na usoro abụọ a, a na-eji otu byte mee ka ike nke ma red na green LEDs. Nke a byte tinyekwara ọkọlọtọ Detuo na Kpochapụ. A haziri byte dị ka ndị a (ndị na-amaghị akwụkwọ ọnụọgụ abụọ nwere ike ịgụ maka usoro a):
| Bit | Aha | Pụtara |
| 6 | Kwesịrị ịbụ 0 | |
| 5..4 | Akwụkwọ ndụ akwụkwọ ndụ | Ncha ọkụ Green LED |
| 3 | Kpochapụ | Ọ bụrụ na 1: kpochapụ ihe mkpuchi nke ọzọ nke LED a |
| 2 | Detuo | Ọ bụrụ 1: dee data LED a na nchekwa abụọ ahụ |
| Mara: omume a na-ewepụ omume doro anya mgbe ha abụọ | ||
| ibe n'ibe atọrọ | ||
| 1..0 | Uhie | Ncha ọkụ na-acha uhie uhie |
Detuo na Kpochapụ ibe n'ibe na-enye ohere ịmegharị njirimara mwepụta njikwa XL ugboro abụọ. Hụ ozi 'Jikwaa ihe nchikota okpukpu abụọ' na Ihe Odide Ntụkwasị maka nkọwa gbasara otu esi eji nke a mee ihe.
Ya mere, LED ọ bụla nwere ike ịtọ otu n'ime ụkpụrụ anọ:
- Icha ọkụ Pụtara
- 0 Gbanyụọ
- 1 Nchapụta dị ala
- 2 Ọkara nchapụta
- 3 Nchapụta zuru oke
Ọ bụrụ na ejighị njirimara nchikota okpukpu abụọ, ọ dị mma idobe Detuo na Kpochapụ bits mgbe ị na-agbanye ọkụ ma ọ bụ gbanyụọ. Nke a na-eme ka o kwe omume iji otu usoro ahụ na ọnọdụ na-egbuke egbuke na-arụghị ọrụ ha ọzọ. Usoro maka ịgbakọ ụkpụrụ ọsọ bụ:
| Ụdị hex | Ọsọ ọsọ | = | (10h x Green) |
| + | Uhie | ||
| + | Ọkọlọtọ | ||
| Ụdị ntụpọ | Ọsọ ọsọ | = | (16 x Green) |
| + | Uhie | ||
| + | Ọkọlọtọ | ||
| ebee | Ọkọlọtọ | = | 12 (OCh na hex) maka ojiji nkịtị; |
| 8 | ime ka ọkụ ọkụ LED, ma ọ bụrụ na ahazi ya; | ||
| 0 | ọ bụrụ na ị na-eji okpukpu abụọ. |
Tebụl ndị a nke ụkpụrụ ọsọ agbakọburu maka iji nkịtị nwekwara ike inye aka:
| Hex | Decimal | Agba | Icha ọkụ |
| 0Ch | 12 | Gbanyụọ | Gbanyụọ |
| 0Dh | 13 | Uhie | Dị ala |
| 0Fh | 15 | Uhie | Juputara |
| 1Dh | 29 | Amber | Dị ala |
| 3Fh | 63 | Amber | Juputara |
| 3 ehh | 62 | Odo | Juputara |
| 1Ch | 28 | Akwụkwọ ndụ akwụkwọ ndụ | Dị ala |
| 3Ch | 60 | Akwụkwọ ndụ akwụkwọ ndụ | Juputara |
Uru maka LEDs na-egbuke egbuke bụ
| Hex | Decimal | Agba | Icha ọkụ |
| 0 bh | 11 | Uhie | Juputara |
| 3 bh | 59 | Amber | Juputara |
| 3 ah | 58 | Odo | Juputara |
| 38h | 56 | Akwụkwọ ndụ akwụkwọ ndụ | Juputara |
Protocol Launchpad
Mara Gbanye - Tọọ bọtịnụ LED
- Ụdị Hex 9nh, Mara, Ọsọ
- Ụdị Dec 144+n, Mara, Ọsọ
Ozi ndetu na-agbanwe ọnọdụ bọtịnụ niile dị na ndebiri ahọpụtara ugbu a nke uru ndetu/CC dabara na nke uru ndetu na-abata yana ọwa MIDI nwere akara efu dabara na ọwa MIDI n nke ozi mbata. A na-eji ọsọ iji tọọ agba LED.
Gbanyụọ - Gbanyụọ ọkụ ọkụ bọtịnụ
- Ụdị Hex 8nh, Mara, Ọsọ
- Dec version 128+n, Mara, Ọsọ
A tụgharịrị ozi a dị ka ozi ndetu nwere otu uru ndetu mana ọ nwere ọsọ nke 0.
A na-eleghara osote byte anya na ozi a.
Tọgharịa njikwa mmalite XL
- Ụdị Hex Bnh, 00h, 00h
- Ụdị Dec 176+n, 0, 0
Agbanyụrụ LEDs niile, ma tọgharịa ntọala nchekwa na okirikiri ọrụ na ụkpụrụ ndabara ha. Ọwa MIDI n na-akọwapụta ndebiri nke echere ozi a (00h-07h (0-7) maka ndebiri onye ọrụ 8, yana 08h-0Fh (8-15) maka ndebiri ụlọ ọrụ 8).
Jikwaa nchikota okpukpu abụọ
- Ụdị Hex Bnh, 00h, 20-3Dh
- Ụdị Dec 176+n, 0, 32-61
A na-eji ozi a iji jikwaa ọnọdụ nkpuchi okpukpu abụọ nke bọtịnụ. Ọwa MIDI n na-akọwapụta ndebiri nke echere ozi a (00h-07h (0-7) maka ndebiri onye ọrụ 8, yana 08h-0Fh (8-15) maka ndebiri ụlọ ọrụ 8). Lee Ihe Odide Ntụkwasị maka ozi ndị ọzọ gbasara nchikota okpukpu abụọ. A na-ekpebi byte ikpeazụ dị ka ndị a:
| Bit | Aha | Pụtara | |
| 6 | Kwesịrị ịbụ 0. | ||
| 5 | Kwesịrị ịbụ 1. | ||
| 4 | Detuo | Ọ bụrụ 1: detuo steeti LED site na nchekwa 'gosipụtara' ọhụrụ | ka |
| nke | ihe nchekwa 'na-emelite' ọhụrụ. | ||
| 3 | Flash | Ọ bụrụ 1: na-atụgharị n'ihu na-atụgharị 'egosiri' buffers ka ịhọrọ | |
| Igwe ọkụ ọkụ LED. | |||
| 2 | Mmelite | Tọọ ihe nchekwa 0 ma ọ bụ ihe nchekwa 1 dị ka ihe nchekwa 'na-emelite' ọhụrụ. | |
| 1 | Kwesịrị ịbụ 0. | ||
| 0 | Ngosipụta | Tọọ ihe nchekwa 0 ma ọ bụ ihe nchekwa 1 dị ka ihe nchekwa 'gosipụta' ọhụrụ. |
Maka ndị na-amaghị nke ọma na ọnụọgụ abụọ, usoro maka ịgbakọ data byte bụ
- Bit Name Pụtara
- 6 kwesịrị ịbụ 0.
- 5 kwesịrị ịbụ 1.
- 4 Detuo Ọ bụrụ 1: detuo steeti LED site na nchekwa 'egosiri' ọhụrụ gaa na nchekwa 'na-emelite' ọhụrụ.
- 3 Flash Ọ bụrụ 1: na-atụgharị n'ihu n'ihu ihe nchekwa 'gosiri' iji mee ka ọkụ ọkụ ahọpụtara ahọpụtara.
- 2 Melite ihe nchekwa 0 ma ọ bụ ihe nchekwa 1 dị ka ihe nchekwa 'na-emelite' ọhụrụ.
- 1 kwesịrị ịbụ 0.
- 0 Gosipụta ihe nchekwa 0 ma ọ bụ ihe nchekwa 1 dị ka ihe nchekwa 'gosipụta' ọhụrụ.
Maka ndị na-amachaghị nke ọma na ọnụọgụ abụọ, usoro maka ịgbakọ data byte bụ:
- Data ụdị Hex = (mmelite 4 x)
- + ngosi
- + 20h
- + Ọkọlọtọ
- Data ụdị nkeji iri = (mmelite 4 x)
- + ngosi
- + 32
- + Ọkọlọtọ
- ebe ọkọlọtọ = 16 (10h na Hex) maka Detuo;
- 8 maka Flash;
- 0 ọzọ
Ọnọdụ ndabara bụ efu: enweghị ọkụ; ihe nchekwa mmelite bụ 0; ihe nchekwa egosiri bụkwa 0. Na ọnọdụ a, a na-egosipụta data LED ọ bụla edere na Mwepụta Control XL ozugbo. Izipu ozi a na-emegharịkwa ngụ oge flash, yabụ enwere ike iji ya megharịa ọnụego ọkụ nke Mwepụta Control XL niile ejikọrọ na sistemụ.
Gbanwuo ọkụ ọkụ niile
- Ụdị Hex Bnh, 00h, 7D-7Fh
- Ụdị Dec 176+n, 0, 125-127
Byte ikpeazụ nwere ike were otu n'ime ụkpụrụ atọ
| Hex | Decimal | Pụtara |
| 7Dh | 125 | Nnwale nchapụta dị ala. |
| 7 ehh | 126 | Nnwale nchapụta nke ọkara. |
| 7Fh | 127 | Nnwale nchapụta zuru oke. |
Izipu iwu a na-emegharị data ndị ọzọ niile - lee ozi Tọgharia njikwa XL maka ozi ndị ọzọ. Ọwa MIDI n na-akọwapụta ndebiri nke echere ozi a (00h-07h (0-7) maka ndebiri onye ọrụ 8, yana 08h-0Fh (8-15) maka ndebiri ụlọ ọrụ 8).
Mwepụta Control XL System Exclusive Protocol Set LEDs
Enwere ike iji ozi pụrụiche sistemụ tọọ ụkpụrụ LED maka bọtịnụ ma ọ bụ ite ọ bụla na ndebiri ọ bụla, n'agbanyeghị ụdị ndebiri ahọpụtara ugbu a. A na-eme nke a site na iji ozi na-esonụ
- Ụdị Hex F0h 00h 20h 29h 02h 11h 78h Template Index Uru F7h
- Ụdị Dec 240 0 32 41 2 17 120 Ndekọ ndebiri Uru 247
Ebe Template dị 00h-07h (0-7) maka ndebiri onye ọrụ 8, yana 08h-0Fh (8-15) maka ndebiri ụlọ ọrụ 8; Index bụ ndepụta nke bọtịnụ ma ọ bụ ite (lee n'okpuru); na Uru bụ ngwa ngwa byte na-akọwa ụkpụrụ nchapụta nke ma red na green LEDs.
Enwere ike ịgwa ọtụtụ LEDs n'otu ozi site n'ịgụnye ọtụtụ ọnụọgụ byte LED-Uru.
Indices bụ ndị a:
- 00-07h (0-7): Ahịrị elu nke mkpịsị aka ekpe gaa n'aka nri
- 08-0Fh (8-15): Ahịrị etiti etiti, aka ekpe gaa akanri
- 10-17h (16-23): Ahịrị ukwu nke ala, aka ekpe gaa akanri
- 18-1Fh (24-31): Ahịrị elu nke bọtịnụ 'ọwa', aka ekpe gaa akanri
- 20-27h (32-39): Ahịrị ala nke bọtịnụ 'ọwa', aka ekpe gaa akanri
- 28-2Bh (40-43): Ngwaọrụ bọtịnụ, Ogbi, Solo, Ogwe ndekọ
- 2C-2Fh (44-47): Bọtịnụ elu, ala, aka ekpe, aka nri
Tụgharịa bọtịnụ
Enwere ike imelite ọnọdụ bọtịnụ nke omume ha ka atọrọ 'Toggle' (kama 'Obere oge') site na ozi Nanị Sistem. A na-eme nke a site na iji ozi a:
- Ụdị Hex F0h 00h 20h 29h 02h 11h 7Bh Template Index Uru F7h
- Ụdị Dec 240 0 32 41 2 17 123 Ndekọ ndebiri Uru 247
Ebe Template dị 00h-07h (0-7) maka ndebiri onye ọrụ 8, yana 08h-0Fh (8-15) maka ndebiri ụlọ ọrụ 8; Index bụ ndeksi nke bọtịnụ (lee n'okpuru); na uru bụ ma 00h (0) maka gbanyụọ ma ọ bụ 7Fh (127) maka on. A ga-eleghara ozi maka bọtịnụ edoghị ka ọ bụrụ 'Toggle'.
Enwere ike ịdenye bọtịnụ ọtụtụ n'ime otu ozi site n'itinye ọtụtụ ọnụọgụ byte Index-Uru.
Indices bụ ndị a:
- 00-07h (0-7): Ahịrị elu nke bọtịnụ 'ọwa', aka ekpe gaa akanri
- 08-0Fh (8-15): Ahịrị ala nke bọtịnụ 'ọwa', aka ekpe gaa akanri
- 10-13h (16-19): Ngwaọrụ bọtịnụ, Ogbi, Solo, Ogwe ndekọ
- 14-17h (20-23): bọtịnụ elu, ala, aka ekpe, aka nri
Gbanwee ndebiri dị ugbu a
Enwere ike iji ozi na-esonụ iji gbanwee ndebiri ngwaọrụ ugbu a:
- Ụdị Hex F0h 00h 20h 29h 02h 11h 77h Template F7h
- Ụdị Dec 240 0 32 41 2 17 119 Template 247
Ebe Template dị 00h-07h (0-7) maka ndebiri onye ọrụ 8, yana 08h-0Fh (8-15) maka ndebiri ụlọ ọrụ 8.
Ozi ngwaọrụ-na- Kọmputa
Pịa bọtịnụ
- Ụdị Hex 9nh, Mara, Ọsọ
- Ụdị Dec 144+n, Mara, Ọsọ ma ọ bụ
- Ụdị Hex Bnh, CC, Ọsọ
- Ụdị Dec 176+n, CC, Velocity
Bọtịnụ nwere ike iwepụta ozi ndetu ma ọ bụ ozi CC na ọwa MIDI enweghị ndeksi n'efu. A na-eziga ozi na ọsọ 7Fh mgbe ịpịrị bọtịnụ; a na-eziga ozi nke abụọ na ọsọ 0 mgbe ewepụtara ya. Enwere ike iji onye ndezi gbanwee ndetu bọtịnụ ọ bụla / uru CC yana uru ọsọ na pịa/mwepụta.
Agbanwere ndebiri
Mwepụta Control XL na-eziga ozi naanị Sistemụ na-agbanwe ndebiri:
- Ụdị Hex F0h 00h 20h 29h 02h 11h 77h Template F7h
- Ụdị Dec 240 0 32 41 2 17 119 Template 247
Ebe Template dị 00h-07h (0-7) maka ndebiri onye ọrụ 8, yana 08h-0Fh (8-15) maka ndebiri ụlọ ọrụ 8.
Ọkụ ọkụ LED site na Ozi ndetu
N'ebe a, ị nwere ike ịhụ ozi ndetu eji eme ọkụ ọkụ n'okpuru akara oku na Mwepụta Control XL.
Ihe nkpuchi ihu abụọ na ọkụ ọkụ LED
Mwepụta Control XL nwere abụọ LED buffers, 0 na 1. Ma ọ bụla nwere ike na-egosipụta mgbe ma na-emelite site na-abata LED ntụziaka. Na omume, nke a nwere ike ịkwalite arụmọrụ nke Mwepụta Control XL n'otu ụzọ abụọ:
- Site n'ịkwalite nkwalite LED buru ibu nke, n'agbanyeghị na ọ nwere ike were 100 milliseconds ka ịtọlite ya, na-egosi na onye ọrụ na-adị ozugbo.
- Site na ịcha ọkụ ọkụ ahọpụtara na-akpaghị aka
Iji nweta ihe nkpuchi abụọ maka ebumnuche mbụ chọrọ obere mgbanwe na ngwa ndị dị adị. Enwere ike iwebata ya n'ụzọ na-esonụ
- Ziga Bnh, 00h, 31h (176+n, 0, 49) na mbido, ebe n na-akọwa ndebiri nke ezubere ozi a (00h-07h (0-7) maka ndebiri onye ọrụ 8, yana 08h-0Fh. (8-15) maka ndebiri ụlọ ọrụ 8). Nke a na-edobe nchekwa 1 dị ka ihe nchekwa egosiri, yana ihe nchekwa 0 dị ka ihe nchekwa na-emelite. Mwepụta Control XL ga-akwụsị igosi data LED ọhụrụ edere ya.
- Dee LEDs na Mwepụta Control XL dị ka ọ na-adị na mbụ, hụ na edobeghi ibe n'ibe oyiri na kpochapụ.
- Mgbe emechara mmelite a, ziga Bnh, 00h, 34h (176+n, 0, 52). Nke a na-edobe ihe nchekwa 0 dị ka
ihe nchekwa egosiri, yana ihe nchekwa 1 dị ka ihe nchekwa na-emelite. Ihe ngosi LED ọhụrụ ga-apụta ozugbo. A ga-e copyomi ọdịnaya nke ihe nchekwa 0 na-akpaghị aka na nchekwa 1. - Dee LEDs ndị ọzọ na Mwepụta Control XL, na Detuo na Kpochapụ bits atọrọ ka efu.
- Mgbe emechara mmelite a, ziga Bnh, 00h, 31h (176+n, 0, 49) ọzọ. Nke a laghachiri na steeti mbụ. A ga-ahụ data LED ọhụrụ ahụ, a ga-edoghachikwa ọdịnaya nke ihe nchekwa 1 na nchekwa 0.
- Gaa n'ihu na nzọụkwụ 2.
- N'ikpeazụ, iji gbanyụọ mode a, zipu Bnh, 00h, 30h (176+n, 0, 48).
N'aka nke ọzọ, enwere ike ime ka LEDs ahọrọ ka ọ gbanye ọkụ. Ka ịgbanwuo ọkụ akpaka, nke na-ahapụ Mwepụta Control XL iji ọsọ na-egbu maramara nke ya, ziga:
- Ụdị Hex Bnh, 00h, 28h
- Ụdị Dec 176+n, 0, 40
Ọ bụrụ na achọrọ usoro iheomume nke mpụga iji mee ka LEDs na-enwu na ọnụego ekpebisiri ike, a na-atụ aro usoro ndị a:
- Tụgharịa ọkụ ọkụ na Bnh, 00h, 20h (ụdị iri 176+n, 0, 32)
- Gbanyụọ ọkụ ọkụ Bnh, 00h, 20h (ụdị iri 176+n, 0, 33)
Dị ka e kwuru na mbụ, ọ bụ ezi omume idobe Clear na Copy ibe n'ibe ịtọ mgbe a na-agwa LEDs n'ozuzu, nke mere na ngwa nwere ike mfe ịgbasa ngwa na-agụnye ọkụ. Ma ọ bụghị ya, mmetụta ndị a na-atụghị anya ya ga-eme mgbe ị na-agbalị ịmebata ya ma emechaa.
Akwụkwọ / akụrụngwa
 |
novation Mwepụta Control Xl Programmer [pdf] Ntuziaka onye ọrụ Mwepụta Control Xl Programmer, Mwepụta Control, Xl Programmer, Programmer |
