150W Otu mpụta nwere ọrụ PFC
Akwụkwọ ntuziaka 

Atụmatụ

• Ntinye AC Universal / oke zuru oke
• Ọrụ PFC arụnyere arụ ọrụ, PF>0.95
• 250% ike ike kacha elu
• Ịrụ ọrụ dị elu ruo 89%
• Jigide ntinye ịwa ahụ 300VAC maka sekọnd 5
• Nchedo: Mkpirisi sekit / ibufe oke / karịa voltage / N'elu okpomọkụ
• Ịjụ oyi site na ikuku ikuku efu
• 1U obere profile 38mm
• Wuru na-arụ ọrụ ọgụgụ isi ọrụ
• 5 afọ akwụkwọ ikike

Ngwa

• Ụlọ ọrụ akpaaka ụlọ ọrụ
• Usoro njikwa ụlọ ọrụ
• Mechanical na eletriki akụrụngwa
• Ụlọ ọrụ nyocha ma ọ bụ ndu
• Nnwale ma ọ bụ usoro nha
• Akụrụngwa nkwukọrịta

■ GTIN CODE
Ọchụchọ MW:https://www.meanwell.com/serviceGTIN.aspx 

■ Nkọwa
HRP-150N bụ 150W otu mmepụta ụdị AC/DC ike ọkọnọ. Usoro a na-arụ ọrụ maka ntinye 85-264VAC voltage na-enye ụdị na mmepụta DC nke a na-achọkarị site na ụlọ ọrụ. A na-eme ka ihe nlereanya ọ bụla dị jụụ site na ikuku ikuku n'efu, na-arụ ọrụ maka okpomọkụ ruo 70 Celsius na-enweghị mkpuchi. Ọzọkwa, HRP-150N na-enye 250% obere oge ike kacha elu maka ngwa moto na ibu electromechanical chọrọ ike dị elu n'oge mmalite.
■ Ihe ntinye ihe nlere

HRP	Mmepụta voltage (12/24/36/48V)
150N	Egosipụtara wattage
24	Aha usoro

 Nkọwapụta

Ụdị		HRP-150N-2	HRP-150N-24		HRP-150N-36		HRP-150N-48
Mpụta	DC VOLTAGE	12V	24V		36V		48V
	EKWERE UGBUA	13A	6.5A		4.3A		3.3A
	Oghere dị ugbu a	0 ~ 13 A	0 ~ 6.5 A		0 ~ 4.3 A		0 ~ 3.3 A
	EGO IKE	156W	156W		154.8W		158.4W
	MGBE NA MMỤTA (max.) Rịba ama. 2	120mVp-p	150mVp-p		200mVp-p		240mVp-p
	VOLTAGE ADJ. MGBE	10.2 ~ 13.8V	21.6 ~ 28.8V		28.8 ~ 39.6V		40.8 ~ 55.2V
	VOLTAGE ndidi Rịba ama. 3	±1.5%	±1.5%		±1.5%		±1.5%
	AKA Iwu	±0.3%	±0.2%		±0.2%		±0.2%
	Iwu Ibu Ibu	±0.5%	±0.5%		±0.5%		±0.5%
	NTKWU, NA-ebili oge	3000ms, 50ms/230VAC 3000ms, 50ms/115VAC na ibu zuru oke
	Jidesie oge (Ụdị)	16ms/230VAC 16ms/115VAC na ibu zuru oke
Ntinye	VOLTAGE nso ote.4	85 ~ 264VAC 120 ~ 370VDC
	Ugboro ugboro	47 ~ 63Hz
	IHE MGBE IKE (Ụdị)	PF>0.95/230VAC PF>0.98/115VAC na ibu zuru oke
	OKWU (Ụdị)	88%	88%		89%		89%
	AC ugbu a (Ụdị)	1.7A/115VAC 0.9A/230VAC
	INRUSH Ugbu a (pdị.)	35A/115VAC 70A/230VAC
	NKWUKWU UGBUA	<1mA / 240VAC
Nchedo	bufee	Ọ na-arụ ọrụ n'ime 105 ~ 200% ike mmepụta ihe karịrị 5 sekọnd wee mechie o/p voltage, re-ike na-agbake
		Mmachi na-adị ugbu a maka ike mmepụta>280% kwadoro maka ihe karịrị sekọnd 5 wee mechie o/p voltage, re-ike na-agbake
	NKWUKWUTAGE	14.4 ~ 16.8V	30 ~ 34.8V		41.4 ~ 48.6V		57.6 ~ 67.2V
		Ụdị nchekwa : Gbanyụọ o/p voltage, re-ike na-agbake
	GARA Okpomọkụ	Mechie o/p voltage, na-agbake na-akpaghị aka mgbe okpomọkụ dara
Gburugburu Ebe Obibi	ỌRỤ NA-arụ ọrụ.	-40 ~ +70 ℃ (tụ aka na "Derating Curve")
	NA-arụ ọrụ IHU URU	20 ~ 90% RH na-abụghị condensing
	Okpomọkụ nchekwa, iru mmiri	-50 ~ +85 ℃, 10 ~ 95% RH
	TEMP. EGO	0.04%/℃ (0 ~ 50 ℃)
	VIBRATION	10 ~ 500Hz, 5G 10min./1 okirikiri, 60min. nke ọ bụla tinyere X, Y, Z axe
	ỌRỤ na-arụ ọrụ Rịba ama. 6	5000 mita
Nchekwa & EMC (Ntụbaaka nke 5)	Ọkọlọtọ nchekwa	UL62368-1, TUV BS EN/EN62368-1, EAC TP TC 004, AS/NZS 62368.1 kwadoro
	NA -ECHE VOLTAGE	I/PO/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
	Nguzogide dịpụrụ adịpụ	I/PO/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC / 25 ℃/ 70% RH
	EMC EMISỌ	Oke		Ọkọlọtọ		Ọkwa ule / ndetu
		Emere		TS EN 55032		Klas B
		Gbanyere		TS EN 55032		Klas B
		Harmonic ugbu a		BS EN/EN61000-3-2		Klas A
		Voltage Flicker		BS EN/EN61000-3-3		—-
	EMC MGBE	BS EN/EN55035, BS EN/EN61000-6-2(BS EN/EN50082-2)
		Oke		Ọkọlọtọ		Ọkwa ule / ndetu
		ED		BS EN/EN61000-4-2		Ọkwa 3, 8KV ikuku; Ọkwa 2, kọntaktị 4KV
		ngalaba RF		BS EN/EN61000-4-3		Ọkwa 3, 10V/m
		EFT/ Burst		BS EN/EN61000-4-4		Ọkwa 3, 2KV
		Mwapụta		BS EN/EN61000-4-5		Ọkwa 4, 4KV/Line-FG; 2KV/ Ahịrị-ahịrị
		Emere		BS EN/EN61000-4-6		Ọkwa 3, 10V
		Ubi magnetik		BS EN/EN61000-4-8		Ọkwa 4, 30A/m
		Voltage Dips na nkwụsị		BS EN/EN61000-4-11		95% tinye 0.5 oge, 30% itinye oge 25, 95% nkwụsịtụ 250 nkeji
Ndị ọzọ	MTBF	1740.3K elekere nkeji. Telcordia SR-332 (Bellcore); 221.7K elekere min. MIL-HDBK-217F (25 ℃)
	Akụkụ	159*97*38mm (L*W*H)
	Mbukota	0.54Kg; 24pcs / 12.96Kg / 0.9CUFT

IHE

1. A na-atụkwa parampat niile akọwaghị aha ya na ibu ntinye 230VAC, yana 25 ℃ nke ambient.
2. A na-atụ Ripple & mkpọtụ na 20MHz nke bandwit site na iji waya abụọ gbagọrọ agbagọ 12 ″ kwụsịrị na 1uf & 47uf myirịta capacitor.
3. Ndigide: gụnyere ịtọlite ​​ndidi, nhazi ahịrị na ibu
4. Enwere ike ịdị mkpa nbibi n'okpuru ntinye dị ala Biko lelee usoro mmebi maka nkọwa ndị ọzọ.
5. A na-ahụta ọkụ eletrik dị ka akụrụngwa nke a ga-etinye n'ime ikpeazụ A na-eme ule EMC niile site na ịtinye unit ahụ na efere ọla 360mm * 360mm nwere ọkpụrụkpụ 1mm. A ghaghị ikwenye ọzọ akụrụngwa ikpeazụ na ọ ka na-emezu ntụziaka EMC. Maka ntụzịaka maka otu esi eme ule EMC ndị a, biko rụtụ aka na nnwale EMI nke akụrụngwa akụrụngwa. (dị ka ọ dị na http://www.meanwell.com)
6. The ambient okpomọkụ derating nke 5 ℃ / 1000m na ​​fanless ụdị na nke 5℃ / 1000m na ​​fan ụdị maka arụ ọrụ elu karịa 2000m (6500ft).

※ Nkwụghachi ụgwọ ngwaahịa maka ozi zuru ezu, biko rụtụ aka na https://www.meanwell.com/serviceDisclaimer.aspx

Ihe Ngosi

PWM fosc: 90 kHz

Ogologo oge

Mmepụta Derating VS Input Voltage

Akwụkwọ ntuziaka ọrụ

1. Isi Ihu
   Ihe nhụta anya na-akwụ ụgwọ maka voltage dobe na ibu wiring ruo 0.5V.
   
2. Ike kacha elu
   P av: Nkezi ike mmepụta (W)
   Pk: Ike kacha elu (W)
   P npk: Ike mmepụta adịghị elu (W)
   P kwadoro: Ike mmepụta ewepụtara (W)
   t : Obosara ike kacha elu(sekọnd)
   T : Oge (skeji)
   

Maka example (ụdị 12V):
Vin = 100V Ọrụ_max = 25%
Pav = Prated = 156W
Pk = 300W
t ≤5 sk
T≧ 20 sekọnd
P npk≤ 108W

Nkọwapụta igwe

Ọrụ Ntụtụ njedebe:

Pin Nke	Ihe omume	Pin Nke	Ihe omume
1	AC/L	4,5	DC mmepụta -V
2	AC/N	6,7	Mpụta DC + V
3	FG

Ọrụ Ntụtụ Njikọ (CN100):
HRS DF11-6DP-2DSA ma ọ bụ otu

Pin Nke	Ihe omume	Ebe obibi	Ọnụ
1	-S	HRS DF11-6DSor dabara	HRS DF11-** SC ma ọ bụ otu
2	+S
3-6	NC

Akwụkwọ ntuziaka nwụnye
Biko rụtụ aka: http://www.meanwell.com/manual.html

Akwụkwọ / akụrụngwa

Mpụtara nke ọma HRP-150N 150W Otu mmepụta nwere ọrụ PFC [pdf] Akwụkwọ ntuziaka HRP-150N, 150W Otu Mpụta na Ọrụ PFC, HRP-150N 150W Otu Mmepụta na Ọrụ PFC

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ