PWM-120 Series 120W Constant Voltage Output LED ọkwọ ụgbọala

“

Nkọwapụta

Ụdị	DC VOLTAGE	EKWERE UGBUA	EGO IKE	Mpụta	ỤTỌ DIMMING	Ugboro ugboro PWM	Ịrụ arụ ọrụ
PWM-120-12	12V	10A	120W	48V 2.5A 120W	0 ~ 100%	1.47kHz (Oghere/ DA-Ụdị), 2.5kHz (DA2-ụdị)	88.5%
PWM-120-24	24V	5A	120W				90%
PWM-120-36	36V	3.4A	122.4W				90%
PWM-120-48	48V

Ntuziaka ojiji ngwaahịa

Nwụnye

1. Gbaa mbọ hụ na ike ntinye dabara na oke akọwapụtara nke
   100-240Vac.
2. Jikọọ LED ibu na mmepụta ọnụ nke
   ọkwọ ụgbọ ala.
3. Debe onye ọkwọ ụgbọ ala ahụ nke ọma na mpaghara ikuku dị mma iji gbochie
   ikpo oke ọkụ.

Njikwa nkwụsịtụ

Oke mbelata nke onye ọkwọ ụgbọ ala sitere na 0% ruo 100%. Iji dozie
nchapụta nke LEDs, jiri usoro njikwa dimming dakọtara
n'ime oke a.

Nlekọta

Na-enyocha onye ọkwọ ụgbọ ala mgbe niile maka akara ọ bụla mebiri emebi ma ọ bụ eyi.
Jiri akwa kpọrọ nkụ hichaa onye ọkwọ ụgbọ ala nwayọ ma ọ dị mkpa.

Ajụjụ A na-ajụkarị (FAQ)

Ajụjụ: Gịnị bụ ntinye voltage nso maka PWM-120 usoro LED
ọkwọ ụgbọala?

A: Ntinye voltage nso bụ 100-240Vac maka DA2-ụdị
ndị ọkwọ ụgbọala.

Ajụjụ: Enwere m ike ijikọ ọtụtụ ibu LED na otu PWM-120
ọkwọ ụgbọala?

A: A na-atụ aro ka ị zoo aka na ọnụ ọgụgụ PSU kacha elu na a
ihe nkedo sekit dabere na ihe nlereanya na ụdị nke mgbawa sekit
eji.

"'

120W Constant Voltagna PWM Output LED Driver

PWM-120 usoro
Akwụkwọ ntuziaka onye ọrụ

2

(maka DA2-naanị ụdị)

Ntinye AC: 100-240Vac (maka naanị DA2-ụdị)

IP67

Ọ bụ 15885

THOMAS SAMUEL

THOMAS SAMUEL

05

ewezuga ụdị 12DA

File Aha: PWM-120-SPEC 2024-09-25

120W PWM Ọkwọ ụgbọala na-ebupụta LED

PWM-120 usoro

Nkọwapụta

Ụdị

PWM-120-12

PWM-120-24

PWM-120-36

PWM-120-48

DC VOLTAGE

12V

24V

36V

EKWERE UGBUA

10A

5A

3.4A

EGO IKE

120W

120W

122.4W

Mpụta

ỤTỌ DIMMING

0 ~ 100%

Ugboro ugboro PWM (Ụdị) 1.47kHz maka oghere/DA-ụdị, 2.5kHz maka ụdị DA2

NTKWU, NA-ebili oge

Cheta.2 Cheta.9

500ms, 80ms/230VAC ma ọ bụ 115VAC

Jide oge (Ụdị) 16ms/230VAC ma ọ bụ 115VAC

VOLTAGE RANGE Rịba ama.3

90 ~ 305VAC 127 ~ 431VDC (Biko rụtụ aka na ngalaba "SATIC CHARACTERISTIC")

Ugboro ugboro 47 ~ 63Hz

IHE MGBE IKE (Ụdị)

PF> 0.97/115VAC, PF>0.96/230VAC, PF>0.93/277VAC @ zuru ibu (Biko rụtụ aka na ngalaba "POWER FACTOR (PF) CharacTERISTIC"

48V 2.5A 120W

Mkpokọta ndakpọ ndakpọ

THD< 20% (@load60%/115VAC, 230VAC; @load75%/277VAC)

Ntinye

OKWU (Ụdị)

88.5%

90%

90%

AC ugbu a (Ụdị)

1.3A / 115VAC 0.65A / 230VAC 0.55A / 277VAC

INRUSH UGBUA (Ụdị) Mmalite Oyiyi 60A (twidth=520s tụrụ na 50% Ipeak) na 230VAC; Maka NEMA 410

90.5%

MAX. Mba. nke PSU na 16A CIRCUIT BREAKER

Nkeji 4 (onye na-emebi okirikiri nke ụdị B) / nkeji 6 (onye na-emebi okirikiri nke ụdị C) na 230VAC

NKWUKWU UGBUA

<0.25mA / 277VAC

Ọ BỤGHỊ IBU/NKWUKWU IKE

Enweghị ike ibu <0.5w maka ụdị oghere; ike oriri <0.5W maka ụdị DA-ụdị/DA2

bufee

108 ~ 130% akara mmepụta ike Hiccup mode, na-agbake na-akpaghị aka mgbe ewepụrụ ọnọdụ mmejọ.

MKPỤRỤ MKPA MKPỌ
N'elu VOLTAGE

Ọnọdụ hiccup 12V / 24V na ọnọdụ 36V / 48V mechie (gụnyere ụdị DA-ma e wezụga ụdị DA2) Ọnọdụ Hiccup, na-agbake na-akpaghị aka mgbe ewepụrụ ọnọdụ mmejọ (naanị maka ụdị DA2)

15 ~ 17V

28 ~ 34V

41 ~ 46V

54 ~ 60V

Mechie o/p voltage, re-ike na-agbake

GARA Okpomọkụ Mechie o/p voltage, re-ike na-agbake

ỌRỤ NA-arụ ọrụ.

Tcase = -40 ~ +90 (Biko rụtụ aka na ngalaba "OUTPUT LOAD vs TEMPERATURE" ngalaba)

MAX. IGBU OZI.

Akpa =+90

Gburugburu Ebe obibi na-arụ ọrụ iru mmiri

20 ~ 95% RH na-abụghị condensing

Okpomọkụ Nchekwa., Ọdịmma iru -40 ~ +80, 10 ~ 95% RH

TEMP. EGO

± 0.03% / (0 ~ 45, ma e wezụga 0 ~ 40 maka 12V)

VIBRATION

10 ~ 500Hz, 5G 12min./1 okirikiri, oge maka 72min. nke ọ bụla tinyere X, Y, Z axe

UL8750 (ụdị "HL") (ma e wezụga maka ụdị 12DA), CSA C22.2 Nke 250.13-12; ENEC BS EN/EN61347-1, BS EN/EN61347-2-13,

Ọkọlọtọ nchekwa

Rịba ama. 5

BS EN/EN62384 nọọrọ onwe ya, IP67, BIS IS 15885 (Part2/Sec13) (maka 12,24 oghere na DA2 Ụdị), EAC TP TC 004, GB19510.1, GB19510.14 kwadoro; Nhazi na-ezo aka na BS EN/EN60335-1; Dị ka BS EN/EN61347-2-13 si kwuo

appendix J dabara adaba maka nrụnye ihe mberede (EL)(AC ntinye: 100-240Vac)(maka DA2-ụdị naanị)

Ụkpụrụ DALI

IEC62386-101, 102 maka DA/DA207,251-Ụdị naanị, Ngwaọrụ ụdị 2(DT6)

SAFE & KWESỊRỊ VOLTAGEI/PO/P:3.75KVAC; I/P-DA:1.5KVAC; O/P-DA:1.5KVAC

EMC

Isolation Iguzogide I/PO/P: 100M Ohms / 500VDC / 25/ 70% RH

NDỊ ỌZỌ MỤRỤ

EMC EMISSION Note.6 IMMUNITY EMC

Nkwenye na BS EN/EN55015, BS EN/EN61000-3-2 Klas C (@load60%); BS EN/EN61000-3-3,GB/T 17743,GB17625.1;EAC TP TC 020
nnabata na BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN / EN 61547, ọkwa ụlọ ọrụ ọkụ (Line-Line Immunity Line 2KV), EAC TP TC 020

MTBF DIMENSION

2243.7K elekere min. Telcordia SR-332 (Bellcore); 191*63*37.5mm (L*W*H)

228.7K elekere min. MIL-HDBK-217F (25)

Mbukota

0.97Kg; 15pcs / 15.6Kg / 0.87CUFT

1. A na-atụle paramita niile akọwaghị aha ya na ntinye 230VAC, akara ugbu a na 25 nke ọnọdụ okpomọkụ. 2. Enwere ike ịwepu ọkwa n'okpuru obere ntinye voltages. Biko rụtụ aka na ngalaba “SATIC CHARACTERISTIC” maka nkọwa. 3. A na-atụ ogologo oge nhazi oge na mmalite oyi mbụ. Ịgbanye/ Gbanyụọ onye ọkwọ ụgbọ ala nwere ike ibute mmụba nke oge akwadoro. 4. A na-ewere onye ọkwọ ụgbọ ala dị ka akụkụ nke a ga-arụ ọrụ na ngwa ikpeazụ. Ebe ọ bụ na arụmọrụ EMC ga-emetụta
site na nrụnye zuru oke, ndị na-emepụta akụrụngwa ikpeazụ ga-emezigharị Ntuziaka EMC na nrụnye zuru ezu ọzọ. (dị ka dị na https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf) 5. Usoro a na-ezute ụdị ndụ ndụ nke> 50,000 awa ọrụ mgbe Tcase, karịsịa tc point (ma ọ bụ TMP, kwa DLC). ), dị ihe dị ka afọ 75 ma ọ bụ obere. 6. Biko rụtụ aka na nkwupụta ikike na MEAN WELL's websaịtị na http://www.meanwell.com 7. The ambient okpomọkụ derating nke 3.5/1000m na ​​fanless ụdị na nke 5/1000m na ​​fan ụdị maka arụ ọrụ elu karịa 2000m(6500ft). 8. Maka ndetu ngwa ọ bụla na nlezianya ọrụ ntinye mmiri IP, biko rụtụ aka na ntuziaka onye ọrụ anyị tupu iji ya. https://www.meanwell.com/Upload/PDF/LED_EN.pdf 9. Dabere na IEC 62386-101/102 DALI ike na usoro oge na nkwụsịtụ, oge nhazi kwesịrị iji nwalee ya na onye njikwa DALI nke nwere ike ịkwado maka Ike DALI na arụ ọrụ, ma ọ bụghị ya, oge nhazi ga-adị elu karịa 0.5 sekọnd maka ụdị DA.
Nkwụghachi ụgwọ ngwaahịa maka ozi zuru ezu, biko rụtụ aka na https://www.meanwell.com/serviceDisclaimer.aspx
File Aha: PWM-120-SPEC 2024-09-25

120W PWM Ọkwọ ụgbọala na-ebupụta LED
DIMMING ọrụ

PWM-120 usoro

AC/L (Braw) AC/N (Blue)

PWM-120

Ụkpụrụ nhụsianya maka mmepụta ụdị PWM A na-enweta Dimming site n'ịgbanwe usoro ọrụ nke mmepụta ugbu a.
Mpụta DC ugbu a ON

Io=0A

Gbanyụọ TON
T

DIM+(Purple)* DIM-(Pink)**+V(Red)(Brown for DA-type) -V(Black)(Blue for DA-type)
* DIM+ maka oghere-Ụdị DA+ maka ụdị DA/DA2
* *DIM- maka oghere-ụdị DA- maka ụdị DA/DA2

TON

okirikiri ọrụ(%) =

×100%

T

Mmepụta ugboro PWM: 1.47kHz maka oghere/DA ụdị 2.5kHz maka DA2-ụdị

3 n'ime 1 arụrụ arụ ọrụ (maka oghere-ụdị)
Tinye otu n'ime usoro atọ dị n'etiti DIM+ na DIM-: 0 ~ 10VDC, ma ọ bụ 10V PWM mgbama ma ọ bụ nguzogide. Isi iyi na-ebelata ugbu a site na ọkọnọ ike: 100A (ụdị.)

Na-etinye mgbakwunye 0 ~ 10VDC

+ V +

eriri LED

-V DIM+
DIM-

–
+ Mgbakwunye Voltage
–

Ejikọla “DIM-na -V”

+ -

10%

0.15%

0.6V 1V

Usoro ọrụ nke mmepụta ugbu a (%)

100% 90% 80% 70% 60% 50% 40% 30% 20% 10% 0%
0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V Ntinye ngbanwe: mgbakwunye vol.tage

Itinye mgbakwunye 10V PWM mgbama (ugboro ugboro 100Hz ~ 3KHz):

+ V +

eriri LED

-V DIM+
DIM-

Mgbama PWM mgbakwunye

Ejikọla “DIM-na -V”

+ -
10% 0.15%
6% 10%

Usoro ọrụ nke mmepụta ugbu a (%)

100% 90% 80% 70% 60% 50% 40% 30% 20%
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Ọrụ okirikiri nke mgbakwunye 10V PWM mgbama mgbanaka ntinye

File Aha: PWM-120-SPEC 2024-09-25

120W PWM Ọkwọ ụgbọala na-ebupụta LED

PWM-120 usoro

Na-etinye nguzogide mgbakwunye:

+ V +

eriri LED

-V DIM+
DIM-

Mgbakwunye Nguzogide

Ejikọla “DIM-na -V”

+ -
10% 0.15%
6K/N 10K/N

Usoro ọrụ nke mmepụta ugbu a (%)

100% 90% 80% 70% 60% 50% 40% 30% 20%

0% dị mkpụmkpụ

10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N (N=ọnụọgụ ọkwọ ụgbọala maka synchronizeddimmingoperation)
Ntinye na-ebelata: Mgbakwunye mgbakwunye

Rịba ama: 1. Min. okirikiri ọrụ nke mmepụta ugbu a bụ ihe dị ka 0.15%, na ntinye dimming bụ ihe dịka 6K ma ọ bụ 0.6VDC, ma ọ bụ 10V PWM mgbama na 6% ọrụ okirikiri. 2. The ọrụ okirikiri nke mmepụta ugbu a nwere ike ịdaba na 0% mgbe ntule ntinye bụ ihe na-erughị 6K ma ọ bụ ihe na-erughị 0.6VDC, ma ọ bụ 10V PWM mgbaàmà na ọrụ okirikiri na-erughị 6%.

DALI Interface (akụkụ isi; maka DA/DA2-ụdị) Tinye akara ngosi DALI n'etiti DA+ na DA-. DALI protocol nwere otu iri na isii na adreesị 16. A na-edozi nzọụkwụ mbụ na 64% nke mmepụta

File Aha: PWM-120-SPEC 2024-09-25

Ibu (%)

120W PWM Ọkwọ ụgbọala na-ebupụta LED
ỌKWU Mpụta vs OMUME

PWM-120 usoro

100
Ntinye 80 230VAC naanị
60 50 40
20

12V naanị

-40-25

0

15

30

40 45 50

60

Ambient okpomọkụ, Ta ()

70 (n'ihu)

Ibu (%)

100
Ntinye 80 230VAC naanị
60
40
20

-40-25

20

45

65

75

85

90 (n'ihu)

Tcase ()

AKWỤKWỌ AKWỤKWỌ

100 90 80 70 60 50 40
90 100 125 135 145 155 165 175 180 200 230 305
Ntinye VOLTAGE (V) 60Hz De-rating dị mkpa n'okpuru obere ntinye voltage.

Mkpokọta mgbasa ozi ọjọọ (THD)

Ụdị 48V, Tcase na 80

30%

25%

20%

277VAC

15%

230VAC

115VAC

10%

5%

0%

50%

60%

70%

80%

90%

100%

Ibu

OKWU(%)

PF

MMADỤ IKE (PF).

Ihe dị ka afọ 80

1 .0 0 0 .9 5 0 .9 0 0 .8 5 0 .8 0 .0 7 5 .0 7 . 0 0 6 .5 0 6 .0 0
10%

20%

30%

40%

50%

60%

70%

80%

90% 100% (75W)

Ibu

277V 230V 115V

Ịrụ ọrụ vs ibu
Usoro PWM-120 nwere arụmọrụ ọrụ dị elu nke nwere ike iru 90.5% na ngwa ubi. Ụdị 48V, Tcase na 80

92 91 90 89 88 87 86 85 84 83 82 81 80
10% 20% 30% 40% 50% 60% 70% 80% 90%

277V 230V 115V

Ibu

Ibu THD (%)

File Aha: PWM-120-SPEC 2024-09-25

120W PWM Ọkwọ ụgbọala na-ebupụta LED

PWM-120 usoro

Oge ndụ

Oge ndụ (Kh)

120

100

80

60

40

20

0

20

30

40

50

60

70

80

90

Tcase()

File Aha: PWM-120-SPEC 2024-09-25

120W PWM Ọkwọ ụgbọala na-ebupụta LED

PWM-120 usoro

Ihe Ngosi

Nzacha EMI

I/P

&

Ndị na-emezigharị

PFC CIRCUIT

ỊGBANWE IKE

OTP

OLP

PWM & PFC njikwa

NKWUKWU &
Nzacha

PFC fosc: 50 ~ 120KHz PWM fosc: 60 ~ 130KHz

OLP

DIMMING CIRCUIT

MKPỤTA Nchọpụta

+V -V DIM+ DIM-

OVP

Nkọwapụta igwe
Ụdị oghere

Okwu ikpe PWM-120

Nkeji:mm Ntachi Obi:±1

300±20

AC/L (Braw) AC/N (Blue)

50± 3 SJTW 18AWG × 2C

5

191 5

63 31.5

2-4.5

T ikpe tc

95.5

5
tc: Max. Ọnọdụ okpomọkụ

5

300±20

UL2464 18AWG×2C SJTW 14AWG×2C 50±3

DIM+(Paraple) DIM-(Pink) +V(Red) -V(Black)

37.5

3

DA/DA2-Ụdị

300±20

AC/L (Braw) AC/N (Blue)

50±3
SJOW 17AWG×2C &H05RN-F 1.0mm2

5

191 5

63 31.5

2-4.5

T ikpe tc

95.5

5
tc: Max. Ọnọdụ okpomọkụ

5

300±20 UL2464 18AWG×2C SJOW 17AWG×2C 50±3 &H05RN-F 1.0mm2

DA+(Purple) DA-(Pink) +V(Brown) -V(Blue)

37.5

3

File Aha: PWM-120-SPEC 2024-09-25

120W PWM Ọkwọ ụgbọala na-ebupụta LED
Na -akwado ntụnye ntụnye
Njikọ akwụkwọ ntuziaka nwụnye maka ụdị oghere

PWM-120 usoro

AC/L(Brown) AC/N(blue)

DIM-(P-INK) +
DIM+(PIPLE)
-V(oji) +
+V(RED)

0 ~ 10Vdc ma ọ bụ 10V PWM ma ọ bụ iguzogide Dimmer ma ọ bụ DALI Dimmer
eriri LED

Ịdọ aka ná ntị Tupu ịmalite ọrụ nrụnye ma ọ bụ nrụzi ọ bụla, biko kwụpụ ọkụ eletrik na ụlọ ọrụ ahụ. Gbaa mbọ hụ
na enweghị ike ijikọ ya ọzọ n'amaghị ama! Debe ikuku ikuku kwesịrị ekwesị gburugburu unit ahụ ma atụbakwala ihe ọ bụla na ya. Ọzọkwa, a ga-edobe mkpochapụ 10-15 cm mgbe
ngwaọrụ dị n'akụkụ bụ isi iyi ọkụ. Ntụnye mgbago na-abụghị nhazi ọkọlọtọ ma ọ bụ na-arụ ọrụ n'okpuru oke ọnọdụ okpomọkụ nwere ike ịbawanye elu
okpomọkụ akụrụngwa akụrụngwa ga-achọ de-rating na mmepụta ugbu a. Ogo dị ugbu a nke eriri isi/secondary akwadoro kwesịrị ịdị ukwuu karịa ma ọ bụ ha nhata na nke unit ahụ. Biko rụtụ aka
na nkọwapụta ya. Maka ndị ọkwọ ụgbọ ala LED nwere njikọ mmiri na-adịghị, chọpụta na njikọ dị n'etiti unit na ihe ọkụ ọkụ bụ
siri ike ka mmiri ghara ịbata n'ime usoro. Maka ndị ọkwọ ụgbọ ala LED nwere ike ịnya ụgbọ ala, gbaa mbọ hụ na onye njikwa gị nwere ike ịnya nkeji ndị a.
chọrọ 0.15mA nke ọ bụla. Tc max. achọpụtara na akara ngwaahịa. Biko hụ na okpomọkụ nke Tc point agaghị agafe oke. Ejikọla “DIM- na -V”. Kwesịrị ekwesị maka ojiji ime ụlọ ma ọ bụ n'èzí na-enweghị ìhè anyanwụ kpọmkwem. Biko zere imikpu n'ime mmiri ihe karịrị iri atọ
nkeji. A na-ewere ọkụ ọkụ ahụ dị ka akụkụ nke a ga-arụ ọrụ na ngwongwo ikpeazụ. Ebe ọ bụ na EMC
arụ ọrụ ga-emetụta site na nrụnye zuru oke, ndị na-emepụta ngwá ọrụ ikpeazụ ga-emezigharị ntụziaka EMC na nrụnye zuru ezu ọzọ.

File Aha: PWM-120-SPEC 2024-09-25

Akwụkwọ / akụrụngwa

EZIOKWU PWM-120 Series 120W Constant Voltage Output LED ọkwọ ụgbọala [pdf] Akwụkwọ ntuziaka onye nwe PWM-120-12, PWM-120-24, PWM-120-36, PWM-120-48, PWM-120 Series 120W Constant Vol.tage Output LED Driver, PWM-120 Series, 120W Constant Voltage Output LED Driver, Constant Voltage Output LED Driver, Voltage Output LED ọkwọ ụgbọ ala, Ọkwọ ụgbọala na-arụpụta ihe, LED ọkwọ ụgbọala, ọkwọ ụgbọala

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ