Intesis INKNXHIS001R000 KNX Interface nwere ọnụọgụ ọnụọgụ abụọ
Nkọwapụta
- Nọmba ihe: INKNXHIS001R000
- Njikọ / Ntinye / mmepụta: KNX, ọdụ ụgbọ mmiri HVAC, ntinye ọnụọgụ abụọ (kọntaktị akọrọ)
- Ihe ngosi LED: KNX
- Mba onye si: Spain
- Akwụkwọ ikike: afọ 3
Ozi ngwaahịa
The Hisense-KNX interface allows full bidirectional communication between Hisense VRF systems units and KNX installations. It has four potential-free binary inputs to integrate external devices (such as window contacts or presence detectors), with the corresponding internal functions available to help improve energy efficiency.
Atụmatụ na uru
- Nhazi ETS
A na-ahazi interface ahụ site na iji ngwa ngwa nhazi ọkọlọtọ ETS. - Ọtụtụ ọrụ arụmọrụ ike dị
Ọpụpụ, windo mepere emepe, ma ọ bụ ọrụ nchekwa ike dị n'ime ya dị iji belata ụgwọ ọkụ. - Ngụkọta njikwa otu na nleba anya sitere na KNX
Site na mgbanwe dị n'ime, counter hours na-agba ọsọ (maka ebumnuche mmezi), na ngosipụta njehie. - Njikwa otu AC site na njikwa anya yana KNX
Enwere ike ịchịkwa ngalaba AC n'otu oge site n'aka onye na-ahụ maka ime ime na KNX. - Dakọtara na igwe ọkụ KNX niile dị n'ahịa
Ihe niile achọrọ DPT ga-adaba na igwe ọkụ KNX niile dị n'ahịa dị. - Ngwakọta okpomọkụ KNX dị nro
A na-ahapụ igwe ọkụ KNX ka ọ na-ejikwa otu AC site na ihe mmetụta okpomọkụ nke thermostat. - Up to five scenes saved/executed from KNX
Up to five scenes can be saved and executed from KNX. - Akụkụ kọmpat, na-enye ohere n'ime ntinye
Enwere ike itinye interface ahụ ngwa ngwa n'ime unit AC n'ihi na ọ belatara akụkụ ya.
| Izugbe | |
| Obosara Netwọk (mm) | 71 |
| Net Ogologo (mm) | 71 |
| Omimi Net (mm) | 27 |
| Ọnụ ụgbụ (g) | 80 |
| Obosara juru n'ọnụ (mm) | 12 |
| Elu juru n'ọnụ (mm) | 6 |
| Omimi juru n'ọnụ (mm) | 8 |
| Arọ juru n'ọnụ (g) | 120 |
| Opera ng Temperature °C Min | -25 |
| Opera ng Temperature °C Max | 60 |
| Nchekwa okpomọkụ °C Min | -40 |
| Nchekwa okpomọkụ Celsius C Max | 85 |
| Power Consump on (W) | 0.232 |
| Ntinye Voltage (V) | 29 VDC |
| Njikọ ọkụ | 2-osisi |
| Configura on | ETS |
| Ike | 1 Ime ụlọ. |
| Wụnye na Condi ons | This gateway is designed to be mounted inside an enclosure. If the unit is mounted outside an enclosure, precau ons should always be taken to prevent electrosta c discharge to the unit. When working inside an enclosure (e.g., making adjustments, se ng switches, etc.), typical an -sta c precau ons should always be followed before touching the unit. |
| AC Model Compa | Hisense VRF systems |
| Ọdịnaya nke nnyefe | Intesis gateway and installa on manual. |
| Agụnyeghị (na nnyefe) | Communica on cables. |
| Ịkwanye | Ugwu mgbidi |
| Ngwa ụlọ | Plas c |
| Akwụkwọ ikike (afọ) | afọ 3 |
| Ihe nkwakọba ihe | kaadiboodu |
| Nchọpụta na ọnọdụ | |
| NJ ngwaahịa | INKNXHIS001R000 |
| Mba onye si | Spain |
| Koodu HS | 8517620000 |
| Klasifica njikwa mbupụ na Nọmba (ECCN) | EAR99 |
| Akụkụ anụ ahụ | |
| Njikọ / Ntinye / mmepụta | KNX, ọdụ ụgbọ mmiri HVAC, ntinye ọnụọgụ abụọ (kọntaktị kpọrọ nkụ). |
Ntuziaka ojiji
Ọnọdụ nwụnye
This gateway is designed for indoor unit installation. Precautions should be taken to prevent electrostatic discharge when mounted outside an enclosure.
Ndakọrịta
Dakọtara na sistemụ Hisense VRF.
Njikọ Example
Refer to the provided installation manual for integration examples.
Jiri Okwu
Ajụjụ
Kedu oge ikike maka ngwaahịa a?
Akwụkwọ ikike maka interface Hisense-KNX bụ afọ 3.
Enwere ike itinye interface ahụ n'èzí ogige?
If the unit is mounted outside an enclosure, precautions should always be taken to prevent electrostatic discharge.
Akwụkwọ / akụrụngwa
 |
Intesis INKNXHIS001R000 KNX Interface nwere ọnụọgụ ọnụọgụ abụọ [pdf] Akwụkwọ ntuziaka INKNXHIS001R000 KNX Interface nwere ọnụọgụ ọnụọgụ abụọ, INKNXHIS001R000, KNX Interface nwere ọnụọgụ ọnụọgụ abụọ, Ọnụ ụzọ ọnụọgụ abụọ, ntinye ọnụọgụ abụọ |