ESP32 Terminal RGB Touch Ngosipụta
Akwụkwọ ntuziaka onye ọrụ
Daalụ maka ịzụrụ ngwaahịa anyị.
Biko gụọ akwụkwọ ntuziaka onye ọrụ a nke ọma tupu ejiri ya wee debe ya nke ọma maka ntụnye aka n'ọdịnihu.
Ndepụta ngwugwu
Eserese ndepụta na-esonụ bụ naanị maka ntụnye aka.
Biko rụtụ aka na ngwaahịa dị n'ime ngwugwu maka nkọwa.
 |
1x ESP32 ngosi |
 |
1x USB-A ka ụdị-C USB |
 |
1x Crowtail/Grove ruo 4pin DuPont USB |
 |
1x Pen Resistive Touch (ngosipụta inch 5 na inch 7 anaghị eji mkpịsị mmetụ mmetụ abịa.) |
Ọdịdị ihuenyo dịgasị iche site n'ụdị, na eserese bụ naanị maka ntụnye aka.
Akpọrọ ihu ihu na bọtịnụ silk, jiri ngwaahịa n'ezie dịka ntụnye aka.
| Ngosipụta HMI 2.4 inch | Ngosipụta HMI 2.8 inch |
 |
 |
| Ngosipụta HMI 3.5 inch | Ngosipụta HMI 4.3 inch |
 |
 |
| Ngosipụta HMI 5.0 inch | Ngosipụta HMI 7.0 inch |
 |
 |
Oke
| Nha | 2.4 ″ | 2.8 ″ | 3.5 ″ |
| Mkpebi | 240*320 | 240*320 | 320*480 |
| Ụdị mmetụ | Youch na-eguzogide | Youch na-eguzogide | Youch na-eguzogide |
| Isi ihe nhazi | ESP32-ỤRỤ-32-N4 | ESP32-ỤRỤ-32-N4 | ESP32-ỤRỤ-32-N4 |
| Ugboro ugboro | 240 MHz | 240 MHz | 240 MHz |
| Flash | 4MB | 4MB | 4MB |
| SRAM | 520KB | 520KB | 520KB |
| ROM | 448KB | 448KB | 448KB |
| PSRAM | / | / | / |
| Ngosipụta Onye ọkwọ ụgbọ ala | ILI9341V | ILI9341V | ILI9488 |
| Ụdị ihuenyo | TFT | TFT | TFT |
| Interface | 1 * UART0, 1 * UART1, 1 * I2C, 1 * GPIO, 1 * batrị | 1 * UART0, 1 * UART1, 1 * I2C, 1 * GPIO, 1 * batrị | 1 * UART0, 1 * UART1, 1 * I2C, 1 * GPIO, 1 * batrị |
| Ọkà okwu Jack | EE | EE | EE |
| Oghere TF Kaadị | EE | EE | EE |
| Omimi agba | 262K | 262K | 262K |
| Mpaghara nọ n'ọrụ | 36.72*48.96mm(W*H) | 43.2*57.6mm(W*H) | 48.96*73.44mm(W*H) |
| Nha | 4.3 ″ | 5.0 ″ | 7.0” |
| Mkpebi | 480*272 | 800*480 | 800*480 |
| Ụdị mmetụ | Youch na-eguzogide | Capacitive Youch | Capacitive Youch |
| Isi ihe nhazi | ESP32-S3-WROOM-1- N4R2 | ESP32-S3-WROOM-1- N4R8 | ESP32-S3-WROOM-1- N4R8 |
| Ugboro ugboro | 240 MHz | 240 MHz | 240 MHz |
| Flash | 4MB | 4MB | 4MB |
| SRAM | 512KB | 512KB | 512KB |
| ROM | 384KB | 384KB | 384KB |
| PSRAM | 2MB | 8MB | 8MB |
| Ngosipụta Onye ọkwọ ụgbọ ala | NV3047 | + | EK9716BD3 + EK73002ACGB |
| Ụdị ihuenyo | TFT | TFT | TFT |
| Interface | 1 * UART0, 1 * UART1, 1 * GPIO, 1 * batrị | 2 * UART0, 1 * GPIO, 1 * batrị | 2 * UART0, 1 * GPIO, 1 * batrị |
| Ọkà okwu Jack | EE | EE | EE |
| Oghere TF Kaadị | EE | EE | EE |
| Omimi agba | 16M | 16M | 16M |
| Mpaghara nọ n'ọrụ | 95.04*53.86mm(W*H) | 108*64.8mm(W*H) | 153.84*85.63mm(W*H) |
Ihe Mgbasawanye
- Eserese atụmatụ
- Koodu isi mmalite
- ESP32 usoro mpempe akwụkwọ
- Ụlọ akwụkwọ Arduino
- Ihe nkuzi 16 maka LVGL
- Ntuziaka LVGL
Maka nkọwa ndị ọzọ biko lelee koodu QR.
Ntuziaka nchekwa
Iji hụ na iji nchekwa ma zere mmerụ ahụ ma ọ bụ mmebi ihe onwunwe nke onwe gị na ndị ọzọ, biko soro ntuziaka nchekwa dị n'okpuru.
- Zere ikpughe ihuenyo ahụ na ìhè anyanwụ ma ọ bụ isi iyi siri ike iji gbochie imetụ ya viewing mmetụta na ndụ.
- Zenarị ịpị ma ọ bụ ịma jijiji nke ọma n'ihuenyo mgbe a na-eji ya iji gbochie ịtọpụ njikọ dị n'ime na ihe mejupụtara ya.
- Maka adịghị arụ ọrụ ihuenyo, dị ka ntugharị, mgbagha agba, ma ọ bụ ngosi edoghị anya, kwụsị iji wee chọọ nrụzi ọkachamara.
- Tupu ịrụkwa ma ọ bụ dochie akụrụngwa akụrụngwa ọ bụla, gbaa mbọ gbanyụọ ike wee kwupu na ngwaọrụ ahụ.
Aha Ụlọ Ọrụ: Ụgwọ nke ụlọ ọrụ Elecrow Technology Development Co., Ltd.
Adreesị ụlọ ọrụ: Ụlọ nke ise, Fengze Building B, Nanchang Huafeng Industrial Park, Baoan District, Shenzhen, China
Email: techsupport@elecrow.com
Ụlọ ọrụ websaịtị: https://www.elecrow.com
Emebere na china
Akwụkwọ / akụrụngwa
 |
Ngosipụta ELECROW ESP32 Terminal RGB Touch [pdf] Akwụkwọ ntuziaka onye ọrụ ESP32 Terminal RGB Touch Ngosipụta, ESP32, Ngosipụta mmetụ RGB njedebe, Ngosipụta mmetụ RGB, Ngosipụta mmetụ, Ngosipụta |