ESP32 Terminal RGB Touch Display
User Manual
Thank you for purchasing our product.
Please read this user manual carefully before use and keep it properly for future reference.
Package List
The following list diagram is for reference only.
Please refer to the actual product inside the package for details.
 |
1x ESP32 Display |
 |
1x USB-A to Type-C Cable |
 |
1x Crowtail/Grove to 4pin DuPont Cable |
 |
1x Resistive Touch Pen (5-inch and 7-inch display do not come with a resistive touch pen.) |
Screen appearance varies by model, and diagrams are for reference only.
Interfaces and buttons are silk screen labeled, use actual product as reference.
| 2.4 Inch HMI Display | 2.8 Inch HMI Display |
 |
 |
| 3.5 Inch HMI Display | 4.3 Inch HMI Display |
 |
 |
| 5.0 Inch HMI Display | 7.0 Inch HMI Display |
 |
 |
Parameters
| Size | 2.4″ | 2.8″ | 3.5″ |
| Resolution | 240*320 | 240*320 | 320*480 |
| Touch Type | Resistive Youch | Resistive Youch | Resistive Youch |
| Main Processor | ESP32-WROOM-32-N4 | ESP32-WROOM-32-N4 | ESP32-WROOM-32-N4 |
| Frequency | 240 MHz | 240 MHz | 240 MHz |
| Flash | 4MB | 4MB | 4MB |
| SRAM | 520KB | 520KB | 520KB |
| ROM | 448KB | 448KB | 448KB |
| PSRAM | / | / | / |
| Display Driver | ILI9341V | ILI9341V | ILI9488 |
| Screen Type | TFT | TFT | TFT |
| Interface | 1*UART0, 1*UART1, 1*I2C, 1*GPIO, 1*Battery | 1*UART0, 1*UART1, 1*I2C, 1*GPIO, 1*Battery | 1*UART0, 1*UART1, 1*I2C, 1*GPIO, 1*Battery |
| Speaker Jack | YES | YES | YES |
| TF Card Slot | YES | YES | YES |
| Color Depth | 262K | 262K | 262K |
| Active Area | 36.72*48.96mm(W*H) | 43.2*57.6mm(W*H) | 48.96*73.44mm(W*H) |
| Size | 4.3″ | 5.0″ | 7.0” |
| Resolution | 480*272 | 800*480 | 800*480 |
| Touch Type | Resistive Youch | Capacitive Youch | Capacitive Youch |
| Main Processor | ESP32-S3-WROOM-1- N4R2 | ESP32-S3-WROOM-1- N4R8 | ESP32-S3-WROOM-1- N4R8 |
| Frequency | 240 MHz | 240 MHz | 240 MHz |
| Flash | 4MB | 4MB | 4MB |
| SRAM | 512KB | 512KB | 512KB |
| ROM | 384KB | 384KB | 384KB |
| PSRAM | 2MB | 8MB | 8MB |
| Display Driver | NV3047 | + | EK9716BD3 + EK73002ACGB |
| Screen Type | TFT | TFT | TFT |
| Interface | 1*UART0, 1*UART1, 1*GPIO, 1*Battery | 2*UART0, 1*GPIO, 1*Battery | 2*UART0, 1*GPIO, 1*Battery |
| Speaker Jack | YES | YES | YES |
| TF Card Slot | YES | YES | YES |
| Color Depth | 16M | 16M | 16M |
| Active Area | 95.04*53.86mm(W*H) | 108*64.8mm(W*H) | 153.84*85.63mm(W*H) |
Expansion Resources
- Schematic Diagram
- Source Code
- ESP32 Series Datasheet
- Arduino Libraries
- 16 Learning Lessons for LVGL
- LVGL Reference
For More Details Please Scan the QR Code.
Safety Instructions
To ensure safe use and avoid injury or property damage to yourself and others, please follow the safety instructions below.
- Avoid exposing the screen to sunlight or strong light sources to prevent affecting its viewing effect and lifespan.
- Avoid pressing or shaking the screen hard during use to prevent loosening of internal connections and components.
- For screen malfunctions, such as flickering, color distortion, or unclear display, stop use and seek professional repair.
- Before repairing or replacing any equipment components, make sure to turn off the power and disconnect from the device.
Company Name: Elecrow Technology Development Co., Ltd.
Company address: 5th Floor, Fengze Building B, Nanchang Huafeng Industrial Park, Baoan District, Shenzhen, China
E-mail: techsupport@elecrow.com
Company website: https://www.elecrow.com
Made in China
Documents / Resources
 |
ELECROW ESP32 Terminal RGB Touch Display [pdf] User Manual ESP32 Terminal RGB Touch Display, ESP32, Terminal RGB Touch Display, RGB Touch Display, Touch Display, Display |