Akwụkwọ ntuziaka X-pointer
( XPG300Y )

kpachara anya

RADIATION LASER. Elela anya n'ime doo ma ọ bụ VIEW Ngwa ngwa ngwa ngwa. Ngwaahịa LASER Klas II.

Atụtụla ebe mgbanaka laser n'anya mmadụ ma ọ bụ VIEW Igwe ọkụ laser ozugbo, ka mkpughe ogologo oge nwere ike ịdị ize ndụ nye anya.

Ngosipụta nwa oge site na ihe nrịbama laser, dị ka ịsachapụ Ìhè ahụ n'anya mmadụ, nwere ike ime ka kpuru ìsì nwa oge dị ka mmetụta nke FLASHBULB igwefoto. Ọ bụ ezie na ọnọdụ a bụ nwa oge, ọ nwere ike
GỤỌ KWESỊRỊ ỌZỌ Ọ BỤRỤ NA ONYE ekpughere ya na-etinye aka n'ihe omume dị oke egwu dị ka ịnya ụgbọ ala.

Mgbanwe nke ngwaọrụ a nwere ike ịkpata ikpughe radieshon dị egwu. Maka nchekwa gị, nweta ngwa a naanị site n'aka onye na-eweta ọrụ CHOISTtechnology nyere ikike.

"Mba ama"

Maka ihe mberede nke ndị ọrụ kpatara, enweghị uche abụghị ụgwọ ọrụ.
Biko buru n'uche na ọkwa dị n'okpuru.

1. Elepụla anya n'ime oghere laser.
2. Atụkwasịla ndị mmadụ anya laser.
3. Debe ebe ụmụaka na-apụghị iru.
4. Mgbanwe ọ bụla ma ọ bụ mgbanwe ọ bụla emere onye njikwa nwere ike imebi ikike gị iji rụọ akụrụngwa.
5. Edokwala onye na-ahụ maka ya n'ebe ọ nọ na ìhè anyanwụ kpọmkwem ma ọ bụ oke okpomọkụ.
6. Ọ bụrụ na ihe siri ike ma ọ bụ mmiri mmiri daa na njikwa, kwụpụ ya ma mee ka ndị ọrụ tozuru eto lelee ya.
7. Onye njikwa ahụ nwere ike ịrụ ọrụ n'etiti 10 ~ 40 Celsius na nchekwa n'etiti -10 ~ 50 Celsius.
8. Biko ṅaa ntị ka ị ghara ida onye nnata.

Ihe mejupụtara & Ọrụ

Aha	Qty
① Onye na-ebufe	1EA
② onye nnata	1EA
③ obere akpa	1ea
④ Akwụkwọ ntuziaka	1EA
⑤ eriri chaja	1EA

[ Isiokwu 1]
Mara: Enwere ike ịgbanwe ihe mejupụtara na ọrụ na-enweghị ịdọ aka ná ntị maka nkwalite

Akụkụ	Aha	Ọrụ	Ọrụ
ⓐ	MODE		Ntugharị òké na-akpụ akpụ wee pịa
ⓑ	Bọtịnụ aka ekpe		Ibe / ibe gara aga
ⓒ	ONYI NA-EKWU		Ụdị ihe nrịbama onyonyo na-agbanwe
ⓓ	Metụ òké		Ntụnye òké ma ọ bụ laser na-agbanye
ⓔ	Bọtịnụ aka nri		Ibe / Ihu na-esote
ⓕ	Ikanam nnyefe		Ntụaka Laser na nlele batrị
ⓖ	Bọtịnụ ọnọdụ		Ịhọrọ ahụigodo / ọnọdụ òké
ⓗ	Mgbanwe ọkụ		Ike On / Gbanyụọ

Nwụnye

1. Tinye ihe nnata n'ọdụ ụgbọ mmiri USB.
2. Chere ruo mgbe LED(ⓙ) nke nnata na-amagharị mgbe niile.
3. Ọ bụrụ na LED (ⓙ) nke nnata flickers, ọ pụtara na ngwaahịa a ghọtara nke ọma.
4. Pịa ihe ngosi mmịfe, mgba ọkụ ọrụ, ma ọ bụ aka ekpe, bọtịnụ aka nri nke ihe na-ebufe ihe karịrị sekọnd abụọ.
   Ka ịkwụsịtụ ntugharị aka, aghọtachaala.
5. Mepee PowerPoint wee pịa bọtịnụ nnyefe. wee lelee [tebụl1].
6. Ọ bụrụ na ọdịda adịghị arụ ọrụ [table1], nnata dị iche na ọdụ ụgbọ USB. Ma tinye ihe nnata n'ime
   USB ọdụ ụgbọ mmiri ọzọ. Tinyegharịa usoro a n'elu.

Ojiji nke X-pointer

1) Ngosipụta ọrụ
① Mepee ihe ngosi file.
② Bugharịa ọnọdụ mgbanwe (ⓐ), na ọnọdụ ga-agbanwe na "Image pointer mode".
③ Gbaa ihe nkiri slide.
④ Ndị ọrụ nwere ike inye ihe ngosi nke ọma ka ha nwere ike iji bọtịnụ aka ekpe ma ọ bụ aka nri (ⓑ,ⓒ) nke nnyefe bugharịa ibe.

Atụmatụ

1. Ọrụ igodo Ime Anwansi
   Igodo anwansi na-enye ndị ọrụ ohere iji X-pointer maka mmemme ọ bụla.
   Ndị ọrụ nwere ike inye ihe ngosi ma nwee ike ijikwa ihe ọkpụkpọ mgbasa ozi, onye na-agụ acrobat, foto viewnke, Winamp, wdg.
2. Igwe mkpịsị aka anya
   Mkpịsị aka anya nwere otu ọrụ dị ka mkpịsị aka nke kọmpụta laptop.
   Njikwa òké mkpịsị aka anya na-enye ọrụ ka ukwuu yana njikwa òké siri ike.
3. Ịdọrọ ahịrị
   Iji “Dọrọ&Drop” na ọnọdụ òké, onye ọrụ nwere ike ise ahịrị na PowerPoint.
4. Laser dị elu
   Modul laser dị elu na-enye gị nkọwa dị mma na ntụzịaka ziri ezi.
   Ọ na-emetụta sekit kwesịrị ekwesị na Korea, EU, Japan na America.
5. 2.4GHz Multi-Channel
   2.4GHz Bluetooth 4.0LE teknụzụ nke GFSK modulation na-eji ọwa 40 na NJ 65,536 nke nwere ike ibelata nnyonye anya site na ngwaọrụ RF ndị ọzọ ma ọ bụ ihe ntụnye X ndị ọzọ.
6. Ụdị ụra ike
   Ọ bụrụ na ị pịa bọtịnụ laser ihe karịrị 20 sekọnd, ọ na-agbanyụ na-akpaghị aka.
   Ọ bụrụ na nnyefe anaghị arụ ọrụ maka oge a kapịrị ọnụ (1 sekọnd), ọ na-atụgharị gaa na ọnọdụ nchekwa ike.
   Ọ na-egbochi ọnwụ na-enweghị isi nke batrị.

Ojiji nke igodo Ime Anwansi

A ga-agbanwe ọrụ X-pointer dị ka onye ọrụ chọrọ.
Ndị ọrụ nwere ike iji X-pointer dị ka njikwa anya nke ọkpụkpọ mgbasa ozi, okwu, mmeriamp, wdg.
A na-echekwa ụkpụrụ isi na X-pointer ma ị nwere ike iji ha ebe ọ bụla.

1. Enwere ike ibudata mmemme igodo anwansi site na: http://www.x-pointer.com (Budata: Ụlọ -> nkwado -> Budata)
2. Fanye ihe nnata n'ọdụ ụgbọ mmiri USB, wee mata ID nke ọma.
3. Malite -> Mmemme -> ChoisTechnology -> igodo anwansi.
4. Họrọ ihe ị ga-eji na ihuenyo mbụ wee pịa 'OK'.
5. Tinye ụkpụrụ igodo ahaziri iche na bọtịnụ ọ bụla wee pịa 'OK'.
6. A na-echekwa ụkpụrụ isi na nnata ma ị nwere ike iji ọrụ gbanwere.

Nkọwapụta

1. Nnyefe
   

   Eji ugboro ugboro	2.402 ~ 2.480GHz
   Eji ọwa	40 ọwa
   NJ ndị a na-amata	65,536
   Ogologo ọrụ	Oke. 50m (Oghere mepere emepe)
   Ike RF	erughị 10mW
   Mgbanwe	GFSK
   Okpomọkụ na-arụ ọrụ	10-40 Celsius C
   Ụdị Laser	Klas)”II
   Mmepụta laser	erughị 1mW
   Ogologo Ogologo Laser (Agba)	515nm(GREEN)
   Oriri ugbu a	erughị 20mA
   Ọnụọgụ bọtịnụ	4 bọtịnụ, 1 slide mgba ọkụ
   Batrị	3.7V batrị Li-polymer
   Nha	130 x 30 x 13 mm
   Ibu	47g (ya na batrị Li-polymer)
   Oge awa eji na-aga n'ihu	awa 15

2. Onye nnata
   

   Interface	USB 1.1/2.0
   Ike	5V (USB ike)
   Sistemụ nrụọrụ	Windows 2000, XP, Vista, 7, Mac OS X
   Oriri ugbu a	erughị 23mA
   Okpomọkụ na-arụ ọrụ	-10-50 Celsius
   Nha	26 x 12 x 4.5 mm
   Ibu	2g

Asambodo & Ozi nnabata usoro

1. Aha ngwaahịa (Aha Nlereanya)
   Nnyefe: XPG300Y
   Onye nnata: XPR-AT2
2. Nọmba Asambodo
   NJ FCC: RVBXP300Y
   OA 0678
3. Onye nrụpụta / mba: ChoisTechnology Co., Ltd. / Korea, China
4. Nrube isi n'usoro
   Nkwupụta nnabata FCC
   FCC Nkeji 15.19

Ngwaọrụ a na-akwado akụkụ 15 nke Iwu FCC.
A na-arụ ọrụ n'okpuru ọnọdụ abụọ a:

(1) Ngwaọrụ a nwere ike ọ gaghị ebute nnyonye anya na-emerụ ahụ, yana
(2) Ngwaọrụ a ga-anabatarịrị nnyonye anya ọ bụla enwetara, gụnyere nnyonye anya nwere ike bute ọrụ na-achọghị.

FCC Nkeji 15.21

Mgbanwe ọ bụla ma ọ bụ mgbanwe (gụnyere antennas) emere na ngwaọrụ a nke ndị nrụpụta akwadoghị nke ọma nwere ike mebie ikike onye ọrụ iji rụọ ngwa ahụ.

Nkwupụta mkpughe RF (2.1091)

Nkwupụta Ngosipụta Radiation FCC RF: Ngwa a na-akwado oke mkpughe radieshon nke FCC RF ewepụtara maka gburugburu enweghị njikwa. Ngwaọrụ a na antenna ya agaghị ejikọta ma ọ bụ na-arụ ọrụ na njikọ antenna ma ọ bụ nnyefe ọ bụla ọzọ.

Nkeji 15.105 (B)
Mara: A nwalere ngwa a wee hụ na ọ dabara na oke maka ngwaọrụ dijitalụ Klas B, dịka akụkụ 15 nke Iwu FCC. Emebere oke ndị a iji nye nchebe ezi uche dị na nnyonye anya na-emerụ emerụ na nrụnye ebe obibi Ngwa a na-ewepụta ojiji ma nwee ike ịgbanye ike ugboro redio ma, ọ bụrụ na etinyeghị ya ma jiri ya dịka ntuziaka siri dị, nwere ike ibute ndabichi na-emerụ ahụ na nkwukọrịta redio. Agbanyeghị, enweghị nkwa na nnyonye anya agaghị eme na otu nrụnye. Ọ bụrụ na akụrụngwa a na-ebute nnyonye anya na-emerụ ahụ na nnabata redio ma ọ bụ telivishọn, nke enwere ike ikpebi site na ịgbanyụ ma gbanye akụrụngwa, a na-agba onye ọrụ ume ka ọ nwaa idozi nnyonye anya site na otu ma ọ bụ karịa n'ime usoro ndị a:

-Tụgharịa ma ọ bụ bugharịa antenna nnata.
-Mmụba parathion a n'etiti akụrụngwa na nnata.
-Jikọọ akụrụngwa n'ime oghere dị na sekit dị iche na nke ejikọrọ onye nnata.
Kpọtụrụ onye na-ere ahịa ma ọ bụ onye ọrụ redio/TV nwere ahụmahụ maka enyemaka.

Mgbanwe ma ọ bụ mgbanwe enyeghị ikike nke ndị na-ahụ maka nnabata nwere ike imebi ikike onye ọrụ iji rụọ ọrụ a.

Nkwado

Ọ bụrụ na enwere ụfọdụ nsogbu ma ọ bụ ihe imeziwanye mgbe ị na-eji ngwaahịa a, biko kpọtụrụ anyị.
Anyị ga-eji obiọma jụọ gbasara ya.
Email: ajụjụ@choistec.com
TEL: +82-32-246-3409, FAX : +82-2-6455-3406
Ibe mbụ: http://www.x-pointer.com
Aha ụlọ ọrụ: ChoisTechnology Co., Ltd.

Akwụkwọ ikike

ChoisTechnology nyere ikike ka ngwaahịa a nweere onwe ya pụọ ​​​​na ntụpọ n'ihe yana arụ ọrụ otu afọ. Ọ bụrụ na achọpụtara ụdị ChoisTechnology gị nwere ntụpọ n'ime oge ahụ, anyị ga-arụzi ma ọ bụ dochie ya ozugbo. Akwụkwọ ikike a anaghị ekpuchi nsogbu ma ọ bụ mmebi sitere na nrụzi, mgbanwe ma ọ bụ nbisa na-enwetaghị ikike.

Akwụkwọ / akụrụngwa

chois TECHNOLOGY XPG300Y X-Pointer Wireless Pointer Presenter [pdf] Akwụkwọ ntuziaka XP300Y-BT, XP300YBT, RVBXP300Y-BT, RVBXP300YBT, XPG300Y X-Pointer Wireless Pointer Presenter, XPG300Y, X-Pointer Wireless Pointer Presenter

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ