Ihe mmetụta CO n'ime ogige BAPI-Stat “Quantum”.
Ntuziaka nwụnye na arụ ọrụ
48665_ins_quantum_CO
Mkpu. 10/31/23

Nchọpụta na gafereview

Ihe mmetụta BAPI-Stat “Quantum” Carbon Monoxide Sensor nwere ụdị mkpuchi ọgbara ọhụrụ nwere LED ọnọdụ ndụ ndụ / uhie. Ọ nwere nha nha 0 ruo 40 ppm CO nwere ọkwa njem mgbagharị 30 ppm/anụ a na-anụ. A na-ahọrọ ebe a na-agbagharị agbagharị maka emechi emechi ma ọ bụ na-emeghe, yana ọkwa mmepụta CO bụ ubi nwere ike ịhọrọ maka 0 ruo 5V, 0 ruo 10V ma ọ bụ 4 ruo 20mA.
Igwe ọkụ akwụkwọ ndụ akwụkwọ ndụ/acha uhie uhie na-egosi ọkwa nkeji nke nkịtị, mkpu, nsogbu/ọrụ ma ọ bụ ule. Bọtịnụ push bọtịnụ n'akụkụ na-etinye unit ahụ n'ọkwa ule iji nyochaa oti mkpu na ọrụ LED. Ihe nhụta nwere ndụ ndụ nke afọ 7.

Mara: A ga-etinyerịrị ihe mmetụta ma kwado ya n'ime ọnwa 4 nke azụrụ iji gbochie mfu nke izi ezi.

(ụkpụrụ arịọnụ ọkọlọtọ n'aka ekpe na 60mm arịọnụ ntọala maka European mgbidi igbe na 60mm arịọnụ ebe n'aka nri)

Nkọwapụta

Ịnye ọkụ: 24 VAC/VDC ± 10%, 1.0 VA Max
Teknụzụ sensọ CO: Nchọpụta Electrochemical CO
Oke: 0 ruo 40 ppm CO
izi ezi: ± 3% nke Ọkwa zuru oke
Mmepụta Analọgụ Nhọrọ nke Jumper: ma ọ bụ 4 ruo 20mA, 0 ruo 5VDC ma ọ bụ 0 ruo 10VDC
Ebe RelayTrip: 30 ppm
Mpụta mbugharị: Ụdị kọntaktsị “C”, 0.1A-30VDC, Emechiekarị (NC) na Kpọtụrụ Mepee (NO)
Oti mkpu na -ege ntị: 75 dB na 10 ụkwụ
Oge mmalite: <Nkeji 10
Oge nzaghachi: < 5 nkeji (mgbe mmalite oge)
Nkwụsị: 6 ọdụ, 16 ruo 22 AWG
Oke ọrụ gburugburu: 40 ruo 100°F (4.4 ruo 37.8°C) 0 ruo 95% RH anaghị ekpokọta
Altimita: Mechanical
Omume LED: Red/Green LED na-egosi ọkwa nkeji nke Nkịtị, Mkpu, Nsogbu/Ọrụ ma ọ bụ Nnwale.
Ndekọ. Ihe & Ogo: ABS Plastic, UL94 V-0: 2 ″ x4″ J-Igbe ma ọ bụ drywall, kposara nyere
Ndụ Ihe Nhụta: 7 afọ ahụkarị
Asambodo: RoHS
Oge ikike: afọ 5

Ịkwanye

Ekwesịrị ịkwanye ihe mmetụta dịka koodu mpaghara si dị. Ọ bụrụ na koodu mpaghara anaghị ekwupụta ebe a na-ebuli elu, BAPI na-atụ aro ịkwanye CO Room Sensor na elu siri ike, nke na-adịghị eme mkpọtụ n'ogo 3 ruo 5 ụkwụ n'elu ọkwa ala n'ụdị kwụ ọtọ iji were advan.tage nke mkpuchi mkpuchi mkpuchi, dị ka eserese 2. A na-enye ngwaike mgbanaka maka igbe njikọ abụọ na nrụnye drywall (nwụnye igbe njikọ gosipụtara).
Mara: Kpọchie 1/16 ″ Allen mkpọchi gbadaa n'ime ntọala ka imepe ikpe ahụ. Weghachite mkpọchi mkpọchi iji chekwaa mkpuchi ahụ.

Igbe nkwụsị

1. Wepụ waya site na mgbidi na site na igbe nkwụsị, na-ahapụ ihe dị ka sentimita isii n'efu.
2. Dọta waya site na oghere dị na efere ntọala.
3. Chekwaa efere ahụ na igbe ahụ site na iji skru # 6-32 x 5/8 ″ na-arị elu enyere.
4. Kwụsị otu ahụ dịka ntuziaka dị na ngalaba nkwụsị. ( ibe nke 3 )
5. Kụzie ụfụfụ dị na ntọala unit ahụ ka ọ bụrụ ngwugwu waya iji gbochie ihe ọ bụla. (lee ndetu n'okpuru)
6. Gbakwunye mkpuchi site n'itinye ya n'elu isi, na-atụgharị ihe mkpuchi ahụ ma gbanye ya n'ime ebe.
7. Chekwaa mkpuchi ahụ site na iji 1/16 ″ Allen wrench kwadoo mkpuchi mkpọchi ahụ ruo mgbe ọ na-agbanye na ala mkpuchi ahụ.

Drywall rịgoro

1. Debe efere isi na mgbidi ebe ịchọrọ ịkwanye ihe mmetụta. Kaa akara oghere abụọ na-arị elu na mpaghara ebe wires ga-esi na mgbidi ahụ pụta.
2. Kwuo oghere abụọ dị 3/16 ″ n'etiti oghere ọ bụla nwere akara. Akụla oghere ndị ahụ ma ọ bụ arịlịka nkụja agaghị ejide. Fanye arịlịka nkụja n'ime oghere ọ bụla.
3. Gwuo otu oghere 1/2 inch n'etiti mpaghara waya akara. Wepụ waya site na mgbidi ma si na oghere 1/2 ", na-ahapụ ihe dịka 6" n'efu. Dịrị waya site na oghere dị na efere ntọala.
4. Chekwaa ntọala na arịlịka akọrọ akọrọ site na iji skru #6×1″ enyere.
5. Kwụsị otu ahụ dịka ntuziaka dị na ngalaba nkwụsị. ( ibe nke 3 )
6. Kụzie ụfụfụ dị na ntọala unit ahụ ka ọ bụrụ ngwugwu waya iji gbochie ihe ọ bụla. (lee ndetu n'okpuru)
7. Tinye ihe mkpuchi site n'itinye ya n'elu isi, na-atụgharị ihe mkpuchi ahụ ma gbanye ya n'ime ebe.
8. Chekwaa mkpuchi ahụ site na iji 1/16 ″ Allen wrench kwadoo mkpuchi mkpọchi ahụ ruo mgbe ọ na-agbanye na ala mkpuchi ahụ.

Nkwụsị

BAPI na-atụ aro iji ụzọ gbagọrọ agbagọ nke opekata mpe 22AWG yana njikọ nke jupụtara na sealant maka njikọ waya niile. Enwere ike ịchọrọ waya nlele buru ibu maka ogologo ọsọ. Wiring niile ga-agbasorịrị koodu eletrik nke mba (NEC) na koodu mpaghara.
Ejila wiring ngwaọrụ a n'otu ụzọ ahụ dị ka wiring AC nke NEC klas 1, NEC 2, NEC klas 3 ma ọ bụ jiri wiring na-ebunye ibu na-arụ ọrụ nke ukwuu dị ka moto, kọntaktị na relays. Nnwale BAPI na-egosi na ọkwa mgbama na-agbanwe agbanwe na ezighi ezi ga-ekwe omume mgbe wiring ike AC dị n'otu ụzọ ahụ dị ka ahịrị mgbama. Ọ bụrụ na ị na-enwe nke ọ bụla n'ime nsogbu ndị a, biko kpọtụrụ onye nnọchi anya BAPI gị.

BAPI na-akwado wiwi ngwaahịa na ike kwụsịrị. Ezi ọkọnọ voltage, polarity, na njikọ wiring dị mkpa maka nrụnye nke ọma. Idebeghị ndụmọdụ ndị a nwere ike imebi ngwaahịa ahụ, ọ ga-emebikwa akwụkwọ ikike ahụ.

Ọrụ njedebe
V+ ………………… 24 VAC/VDC ±10%
GND………… Iji njikwa Ground [GND ma ọ bụ nkịtị] Mpụ ………………… Mmepụta, Mgbama CO, 4 ruo 20 mA, 0 ruo 5 ma ọ bụ 0 ruo 10 VDC, zoro aka na GND
Mba …………………. Kọntaktị agbagharịa, na-emepekarị aka na COM
COM …………………. Mgbasa ozi kọntaktị nkịtị
NC …………………. Kọntaktị Mgbasa Ozi, Emechiri nke ọma, zoro aka na COM

Mara: Enwere ike ịhazi ihe mmepụta CO maka 4 ruo 20 mA, 0 ruo 5 ma ọ bụ 0 ruo 10 VDC n'oge ọ bụla. Tọọ jumper na P1 dị ka egosiri n'elu.

Arụ ọrụ LED/acha ndụ ndụ:

ỌNỌDỤ ỌDỤ: Akwụkwọ ndụ akwụkwọ ndụ na-enwu, LED LED na-egbuke egbuke kwa sekọnd 30 ọ bụla na-egosi na agbanyere oti mkpu
Ọkwa Mkpu: Agbanyụrụ ọkụ akwụkwọ ndụ akwụkwọ ndụ, ọkụ ọkụ na-acha uhie uhie na mpi na-akpụ akpụ
Ọnọdụ/Ọnọdụ ọrụ LED: Akwụkwọ ndụ akwụkwọ ndụ na-enwu enwu, Ikanam Uhie na-enwu ugboro abụọ yana onye na-akụ mkpu “beeps” otu ugboro n'ime sekọnd 30 ọ bụla

Mara: Ngalaba adịghị njikere maka ịrụ ọrụ ruo mgbe oge mmalite nkeji iri gafere.

Nrụ ọrụ bọtịnụ nnwale

Enwere ike iji bọtịnụ ule eweghachi azụ n'akụkụ otu unit iji nwalee buzzer mkpu na LEDs. Mgbe a pịa bọtịnụ Nleba azụ azụ, ọkụ ọkụ Green na-enwu, onye na-akụ mkpu “beeps” otu ugboro na ọkụ ọkụ na-acha uhie uhie na-enwu 4 ruo 5 ugboro. Mgbe ahụ Green LED na-apụ apụ, ọkụ na-acha uhie uhie na-egbukepụ egbukepụ na ụda mkpu "beeps" ugboro abụọ. A naghị arụ ọrụ relay site na ịpị bọtịnụ nnwale.

Mara: Ngalaba adịghị njikere maka ịrụ ọrụ ruo mgbe oge mmalite nkeji iri gafere.

Nchọpụta nchọpụta

Nsogbu nwere ike ime:	Ngwọta enwere ike:
Nchọpụta nsogbu izugbe	Kpebisie ike na etinyere ndenye nke ọma na ngwa njikwa na ụlọ akụrụngwa. Lelee wiring na ihe mmetụta na njikwa maka njikọ kwesịrị ekwesị. Lelee maka corrosion na njikwa ma ọ bụ ihe mmetụta. Wepu corrosion, yipu waya njikọ ọzọ wee tinyeghachi njikọ ahụ. N'ọnọdụ dị oke njọ, dochie njikwa, waya njikọ na/ma ọ bụ ihe mmetụta. Lelee wiring n'etiti ihe mmetụta na njikwa. Kpọọ ọnụ ọnụ na njedebe ihe mmetụta na njedebe njikwa. Kwupu eriri njikọ na onye njikwa na ihe mmetụta. N'ịbụ ndị akwụpụrụ wires, tụọ nguzogide site na waya-na-waya na multimeter. Mita kwesịrị ịgụ ihe karịrị 10 Meg-ohms, mepere emepe ma ọ bụ OL dabere na mita ahụ. Mee ka eriri ndị jikọtara ọnụ n'otu nsọtụ. Gaa na njedebe nke ọzọ wee tụọ nguzogide site na waya na waya na multimeter. Mita kwesịrị ịgụ ihe na-erughị 10 ohms (nlele 22 ma ọ bụ ibu, 250 ụkwụ ma ọ bụ ihe na-erughị). Ọ bụrụ na ule ọ bụla ada ada, dochie waya. Lelee ike ọkọnọ/ njikwa voltage ọkọnọ Kwupu ihe mmetụta wee lelee wires ike maka vol kwesịrị ekwesịtage (lee nkọwapụta na ibe 1)
CO na-ezighi ezi	Chere nkeji iri na ise ka nkwụsị ọkụ gachara. Lelee parampat ngwanrọ BAS niile. Kpebisie ike ma ọ bụrụ na ekpughere ihe mmetụta ahụ na gburugburu mpụga dị iche na gburugburu ụlọ (conduit draft).

Building Automation Products, Inc.,
750 North Royal Avenue, Gays Mills, WI 54631 USA
Tel:+1-608-735-4800
Faksị+1-608-735-4804 
Email:sales@bapihvac.com
Web:www.bapihvac.com

Akwụkwọ / akụrụngwa

BAPI BAPI-Stat Quantum Room sensọ [pdf] Akwụkwọ ntuziaka BAPI-Stat Quantum Room sensọ, BAPI-Stat, Quantum Room Sensor, Ụlọ ihe mmetụta, ihe mmetụta

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ