IDS AM-800480N6TZQW-T06H LCD Touch 
Screen User Guide

IDS AM-800480N6TZQW-T06H LCD Touch Screen User Guide

KIT CONTENTS

IDS AM-800480N6TZQW-T06H LCD Touch Screen - KIT CONTENTS

REQUIRED PARTS NOT SUPPLIED IN THE KIT

IDS AM-800480N6TZQW-T06H LCD Touch Screen - REQUIRED PARTS NOT SUPPLIED IN THE KIT

PART 1: CONNECTING THE DRIVER CARD TO THE DISPLAY

Connect the LVDS connector from the driver card to the back of the LCD.
Take care to line up the pins and use the correct orientation as per the picture below.

IDS AM-800480N6TZQW-T06H LCD Touch Screen - Take care to line up the pins and use the correct orientation as per the picture below

It should look like this when the connector is correctly installed.

IDS AM-800480N6TZQW-T06H LCD Touch Screen - It should look like this when the connector is correctly installed.

CONNECTING THE DRIVER CARD TO THE POWER SUPPLY AND HDMI SOURCE

Connect the power connector to the 12V DC power supply using a 2.1mm connector with centre positive and barrel negative.
Connect the HDMI connector to your source.

IDS AM-800480N6TZQW-T06H LCD Touch Screen - Connect the HDMI connector to your source

Turn the power switch to the ON position.

IDS AM-800480N6TZQW-T06H LCD Touch Screen - Turn the power switch to the ON position

IDS AM-800480N6TZQW-T06H LCD Touch Screen - CONNECTING THE DRIVER CARD TO THE POWER SUPPLY AND HDMI SOURCE

PART 2: CONNECTING THE TOUCH PANEL

The display has an FFC tail with the USB connections.

IDS AM-800480N6TZQW-T06H LCD Touch Screen - The display has an FFC tail with the USB connections

Remove any packing foam and tape to release the touch control board from the back of the display.

Place the display face up and line up the small USB connector PCB.

IDS AM-800480N6TZQW-T06H LCD Touch Screen - Place the display face up and line up the small USB connector PCB

Locate CN4 on the PCB and carefully lift up the flap.

IDS AM-800480N6TZQW-T06H LCD Touch Screen - Locate CN4 on the PCB and carefully lift up the flap

Note the orientation of the FFC and the PCB, it must be connected the correct way round or damage may occur. Push the FFC tail into
the connector far enough so that the dark strengthening section is all the way in, and close the flap.

IDS AM-800480N6TZQW-T06H LCD Touch Screen - Note the orientation of the FFC and the PCB

Turn the PCB over and connect a USB Mini lead.

IDS AM-800480N6TZQW-T06H LCD Touch Screen - Turn the PCB over and connect a USB Mini lead.

The touch panel can now be connected to a PC and will be automatically installed by MS Windows10.

IDS AM-800480N6TZQW-T06H LCD Touch Screen - The touch panel can now be connected to a PC and will be automatically installed by MS Windows10

The FFC tail and controller are very fragile and easily torn. It is recommended that once connected to the breakout board everything is
secured to the back of the display using tape. This will reduce any strain on the FPC material.

FURTHER INFORMATION

The values contained in this data sheet can change due to technical innovation. Any such changes will be made without separate notification.

If you require further assistance or have a specific or custom enquiry, please contact the IDS team via email or phone. Alternatively please visit our website for more product info and to see our full range.

 

 

IDS logo

Unit 2, Berkshire Business Centre,
Berkshire Drive, Thatcham,
Berkshire, RG19 4EW
+44 (0)1635 294600

[email protected]
www.i-lcd.com

ABOUT IDS

Intelligent Display Solutions was established in 2001 by display industry experts. We have extensive knowledge of both the technical and user interface approaches to designing displays for various applications, using LCD, TFT and OLED technologies. We work with our
customers to develop new and innovative displays – some award-winning – to enhance their products.

IDS is a division of Intelligent Group Solutions Ltd (IGS) – a well-established, respected, industry-leading Optoelectronics solutions provider. Much of IGS’ business comes from providing semi-custom or custom products, both in component and sub-assembly form. We offer design support and prototyping within the European marketplace, with the capability to deliver production displays to wherever in the world the customer’s manufacturing or assembly is being undertaken.

INTELLIGENT GROUP SOLUTIONS DIVISIONS

INTELLIGENT GROUP SOLUTIONS DIVISIONS logo

 

 

 

 

 

IDS logo

+44 (0)1635 294600 | [email protected] | www.i-lcd.com
Intelligent Display Solutions, Unit 2, Berkshire Business Centre,
Berkshire Drive, Thatcham, Berkshire, RG19 4EW
A division of Intelligent Group Solutions Ltd

Documents / Resources

IDS AM-800480N6TZQW-T06H LCD Touch Screen [pdf] User Guide
AM-800480N6TZQW-T06H LCD Touch Screen, AM-800480N6TZQW-T06H, LCD Touch Screen

References

Leave a comment

Your email address will not be published. Required fields are marked *