Ideal Standard PROSYS Half WC Frame for Wall Mounted Pans
Product Specifications
- Brand: PROSYS
- Model: WC Half Frame
- Dimensions: 405mm x 605mm x 350mm ~ 550mm
- Weight: 35g
- Operating Temperature: 0°C ~ 200°C
- Power Input: 100-500W
- Voltage: 230V
- Pressure Range: 120mm ~ 190mm
- Frequency: 180Hz
- Speed Levels: 0-40
- Material: Plastic
Installation
Follow these steps to install the PROSYS WC Half Frame:
- Identify the mounting location for the frame.
- Securely attach the frame using the provided screws.
- Ensure the frame is level and stable before use.
Powering On
To power on the device, follow these steps:
- Connect the power cord to a suitable power outlet.
- Turn on the device using the power switch located on the side of the frame.
Adjusting Settings
You can adjust the temperature and speed settings of the device as follows:
- Use the control panel on the device to set the desired temperature.
- Adjust the speed levels using the buttons provided on the frame.
Maintenance
To ensure proper functionality and longevity of the product, perform regular maintenance tasks:
- Clean the frame regularly using a damp cloth.
- Avoid using abrasive cleaners that may damage the surface.
- Inspect the power cord for any signs of wear and tear.
Frequently Asked Questions (FAQ)
Q: What should I do if the device does not turn on?
A: Check the power source and ensure the power cord is securely connected. If the issue persists, contact customer support.
Q: Can I adjust the temperature settings on this device?
A: Yes, you can adjust the temperature settings using the control panel provided on the frame.
Q: Is this product suitable for outdoor use?
A: This product is designed for indoor use only and should not be exposed to outdoor elements.
Documents / Resources
 |
Ideal Standard PROSYS Half WC Frame for Wall Mounted Pans [pdf] Installation Guide PROSYS, PROSYS Half WC Frame for Wall Mounted Pans, Half WC Frame for Wall Mounted Pans, Frame for Wall Mounted Pans, Wall Mounted Pans, Pans |
