ICOM UT133 Bluetooth Communication Internal Board
Before the installation:
Prepare 2 sponges that comes with the lIC-A120.
INSTALLATION
- Turn OFF the transceiver and disconect the DC power cable from the power supply.
- Remove the top cover.
- Remove the protect sheet from the Thin sponge, and then apply it to the PCB.
- Remove the protection sheet from the thick sponge, and then apply it to the U-133.
- Attach the UT-133 to the connector on the PCB
- Attach the top cover.
American Communication Systems
Discover the Power of Communications http://www.ameradio.com
Documents / Resources
 |
ICOM UT133 Bluetooth Communication Internal Board [pdf] Installation Guide UT133, Bluetooth Communication Internal Board, Communication Internal Board, Internal Board, UT133, Bluetooth Board |
