Installation Guide for ICOM models including: UT133, Bluetooth Communication Internal Board, Communication Internal Board, Internal Board, UT133, Bluetooth Board

UT133 Option Board Installation into the A120 Radio

Icom UT133 Installation into the A120

American Communication Systems

Icom-UT-133-installation-into-the-A120-radio

Buy Icom UT-133 Bluetooth Communication Internal Plate

3 days ago — 1) Turn OFF the transceiver and disconect the DC power cable from the power supply. 2) Remove the top cover. 3) Remove the protect sheet from the Thin ...

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized
• Document:
  • Text
  • References

File Info : application/pdf, 1 Pages, 371.38KB

UT-133 Bluetooth Option Board Installation

CAUTION! Optional unit installation should be done at an authorized Icom dealer or distributer.

Before the installation: Prepare 2 sponges that comes with the IC-A120.

Sponge (Thin)

Sponge (Thick)

1) Turn OFF the transceiver and disconect the DC power cable from the power supply.
2) Remove the top cover.
Top cover

4) Remove the protection sheet from the thick sponge, and then apply it to the UT-133.

Sponge (Thick)
UT-133

Sponge (Thick)
Top view

5) Attach the UT-133 to the connector on the PCB.

3) Remove the protect sheet from the Thin sponge, and then apply it to the PCB.
Sponge (Thin)

Top view
6) Attach the top cover. Be careful of the top cover direction:
Rear

Sponge (Thin)

Top view

(Continued on the right above.)

Front Cutouts



References

• American Communication Systems | Two-Way Radio Dealer