IBRIGHT E97A Smart Floodlight Camera
What’s Included
SHUT POWER OFF AT THE BREAKER
If you don’t know where your breaker is or how to turn off power to your floodlight circuit, consult with a licensed electrician.
WARNING: Risk of electrical shock
- Disconnect power at the fuse or circuit breaker before installing.
- Verify that the supply voltage is correct. Connect fixture to an AC100V-240V, 50/60 Hz power source.
- Properly ground fixture.
- Always follow code standards when installing wired connections.
- If you are outside of North America, installation and wiring must be performed by a licensed electrician.
CAUTION: Risk of fire
- Do not install near combustible or flamable surfaces.
NOTICE
- Do not connect this light fixture to a dimmer switch or timer.
- Floodlight Camera must be installed on a wall and on a UL listed junction box.
HOW IT FITS ALL TOGETHER
American gauge power cord color: Black, White, Yellow green. Connect Floodlight Camera cables with same color junction box cables.
Europe/Australia gauge power cord color: Blue, Brown, Yellow green. Connect Floodlight Camera cables with same color junction box cables.
PREPARE YOUR FLOODLIGHT CAMERA FOR INSTALLATION
- Loosen the knobs on the light fixtures to rotate them out of the way and allow access to the mounting screws.
- According to your actual scene to adjust the view angle of camera
RESTORE POWER AT THE BREAKER
After restoring power, the lights will turn on and your Floodlight Camera will begin speaking to you to let you known it’s in setup mode.
CONNECTION PREPARATION
Please install the Floodlight Camera within WiFi covered area to ensure the best working performance.
Note: Make sure smart phone is connected with your wireless router. Please note the camera is only working under 2.4G Wi-Fi, not support 5G Wi-Fi.
Get the APP and Account
For the best experience, please download the ‘TuyaSmart’ APP to your smartphone from App Store or Google Play, or you can also scan the QR code below, the APP icon will be displayed after installed successfully.
Launch the app from your smartphone and click the Sign-Up button. Follow the on-screen instructions.
Connect the power to the camera
After installation, switch on the button.
Set up your camera
- Power the device on and make sure the indicator is red and flashing quickly or a prompt tone is heard.
- If the indicator is not red and flashing quickly, use the reset button to press the reset button of camera above 5 seconds, then release the button, a red LED on the front of camera will blink quickly.
- Follow App’s instructions to complete network pairing process, the device will connect to your Wi-Fi network successfully.
- The blue light is on, camera is ready for viewing.
You’re done!
Congratulations! Your camera is set up and ready to go.
Appendix: Camera LED Guide
All trademarks are used for reference purposes only.
Thanks again for choosing our Floodlight camera! Make life safe in your hands! Boost security mobility in your smartphone!
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
FAQs
If you want to monitor a limited area, spotlight cameras might be a wonderful choice, and since most of them run on batteries, installing them can be simpler. Floodlight cameras are the best choice for keeping an eye on a big, busy area like a driveway or yard because they often produce a broader, brighter light.
Your Floodlight Cam’s floodlights have a 270-degree radius and are controlled by passive infrared heat sensing. The 140-degree-range camera unit on your Floodlight Cam alerts you to movement within the camera’s field of vision.
Floodlight Cam is tuned for detecting human-sized objects up to 30 feet (10 meters) distant when the motion detector is parallel to the ground.
One way customers can save money over time is by using less electricity, spending less on maintenance, and having a longer lifespan, to name a few advantages. Furthermore, LED flood lights are unaffected by changes in weather and temperature. They are the safest form of lighting because they don’t generate heat.
Verify that all of your wires are plugged in correctly and that the router’s front-facing LEDs are all green. Look to see whether a different Wi-Fi device is experiencing trouble joining the network. 30 seconds after unplugging your router, connect it back in. Check to see whether your Floodlight Cam reconnects on its own.
A high-quality LED floodlighting system can have a lifespan of 10 to 15 years with the proper care and usage guidelines. The length of this might also be increased by switching drivers.
It indicates that the Floodlight Cam has lost Internet connectivity.
The maximum battery life for wireless security camera batteries is one to three years. Compared to watch batteries, they are more easier to swap out.
Because they are powered by batteries, wireless cameras do not require an electrical power source.
Most Wi-Fi smart cameras work best at temperatures between -10 and -20. In order to keep your camera running at its best, you should maintain it in a location where snow won’t gather. Additionally, try to keep condensation and ice out of it.
It cannot attempt to see in the dark without a light source that can illuminate the area beneath the camera. However, the included night vision illuminators for consumer cameras are only designed for usage up close and have a fixed brightness.
For each device, Ring suggests upload and download speeds of 1-2 Mbps. Depending on the camera and video quality you select, the Nest camera needs between 0.15 and 4 Mbps of bandwidth whereas Arlo cameras use between 0.3 and 1.5 Mbps.
Wireless security camera systems can have some benefits, such as flexibility and convenience of installation, even if wired security camera systems are more dependable and secure. Therefore, the camera you choose will rely on your specific security needs.
If a wired security camera is connected to a DVR or other storage device, it can function without a wifi connection. Many cameras now support mobile LTE connectivity, making them an alternative to wifi as long as you have a mobile data plan.
The only thing you have to do to wireless security cameras is install the batteries. If you buy a wireless security camera, plug the power cable into an outlet. For PoE security cameras, just attach an Ethernet cable to a router as well.
