LED Drivers with 5.0 SIG Mesh
HED6045/BT
Dimmable Driver & Constant Current 
Product Description
HED6045/BT is a Bluetooth dimmable LED driver, with maximum power output of 45W. It comes with Switch-Dim interface by using Push switch (retractive switch) and of course Bluetooth dimming interface. It is ideal for direct projects or new luminaires design for lighting manufacturers. With Bluetooth wireless mesh networking, it makes communication between luminaires much easier without time-consuming hardwiring, which eventually saves costs for projects. Meanwhile, simple device setup and commissioning can be done via koolmesh app.
App Features
 |
Quick setup mode & advanced setup mode |
| Floorplan feature to simplify project planning | |
| Web app/platform for dedicated project management | |
| Koolmesh Pro iPad version for on-site conguration | |
| Grouping luminaires via mesh network | |
| Scenes | |
| Detailed motion sensor settings | |
| Push switch configuration | |
| Schedule to run scenes based on time and date | |
| Astro timer (sunrise and sunset) | |
| Staircase function (primary & secondary) | |
| Internet-of-Things (IoT) featured | |
| Device firmware update over-the-air (OTA) | |
| Device social relations check | |
| Bulk commissioning (copy and paste settings) | |
| Power-on status (memory against power loss) | |
| Offline commissioning | |
| Different permission levels via authority management | |
| Network sharing via QR code or keycode | |
| Remote control via gateway support HBGW01 | |
| Interoperability with Hytronik Bluetooth product portfolio | |
| Compatible with EnOcean switch HBES01/W & HBES01/B | |
| Continuous development in progress… |
Hardware Features
 |
Switch-Dim |
| Flicker free (1-100%) | |
| Bluetooth dimmable control | |
| Insulated terminal cover with cord restraint | |
| Active PFC design | |
| Logarithmic Dimming | |
| Linear Dimming | |
| Configurable constant current (CC) output via DIP switch | |
| Loop-in and loop-out terminals for efficient installation | |
| Open-circuit Protection | |
| Short-circuit Protection | |
| Overload Protection | |
| 5-year warranty, designed for long lifetime up to 50,000 hours |
* Certain scenes which require external photocell can be achieved by using together with Hytronik Bluetooth sensors,such as HBIR29, HCD038/BT + sensor head etc.
Web app/platform: www.iot.koolmesh.com
Fully support EnOcean self-powered switch module PTM215B (HBES01/W & HBES01/B)
Output Configuration
Warning: Please make sure the correct current is selected before starting the driver!
Technical Specifications
| Bluetooth Transceiver | |
| Operation frequency | 2.4 GHz – 2.483 GHz |
| Transmission power | 4 dBm |
| Range (Typical indoor) | 10~30m |
| Protocol | 5.0 SIG Mesh |
| Input | |
| Mains Voltage | 220~240VAC 50/60Hz |
| Mains Current | 0.24~0.22A |
| Power Factor | 0.95 |
| Max. Efficiency | 89% |
| Psb/Pno | <0.5W |
| Output | |
| Output Current | 350mA~1050mA |
| Output Voltage | 10-54V |
| Uout Max. | 75VDC |
| Turn-on Time | <0.5s |
| Dimming Interface | Switch-Dim |
| Environment | |
| Operation Temp. | -20 ~ +50 ℃ |
| Case Temp. (Max.) | 80 ℃ |
| IP Rating | IP20 |
| Safety and EMC | |
| EMC Standard | EN55015, EN61547, EN61000-3-2/-3-3, EN300328, EN301489-1/-17, EN50663 |
| Safety Standard | EN61347-1, EN61347-2-13 |
| Dielectric strength | Input →output: 3000VAC / 5mA /1min |
| Abnormal protection | Output short-circuit protection Overload Protection Open-circuit Protection |
| Max. output power/current/voltage range | |
| HED6045/BT | 3.5-19W/ 350mA /10-54VDC 5-27W/ 500mA /10-54VDC 6-32W/ 600mA /10-54VDC 7-38W/ 700mA /10-54VDC 8-42W/ 800mA /10-52VDC 9-45W/ 900mA /10-50VDC 9.5-45W/ 950mA /10-47VDC 10-45W/ 1000mA /10-45VDC 10.5-44W/ 1050mA /10-42VDC |
Mechanical Structure & Dimensions
Built-in installation
Stand-alone installation
Wire Preparation
To make or release the wire from the terminal, use a screwdriver to push down the button.
Wiring Diagram
Note: There is no need for any hardwirings on “push” terminal between one driver to another. The installer only needs to connect the push switches to the nearest driver to save labor and cost. The push switches can be assigned to control any Bluetooth driver through the app commissioning.
Loading and In-rush Current
| Model | HED6045/BT |
| In-rush Current (Imax.) | 17.8A |
| Pulse Time | 72 us |
Circuit Breaker Information
| Automatic circuit breaker type | B16A | B10A | B13A | B20A | B25A |
| HED6045/BT | 43 | 27 | 35 | 54 | 67 |
The data above is calculated according to the formula: Maximum Amount = 16/(Pn/230). In order to provide a more reliable reference in real application, the data have been revised to take 60% of the number calculated, i.e. 16/(Pn/230) x 60%.
Please kindly take note that the calculation is based on ABB circuit breaker series S200. Actual values may differ due to different types of circuit breaker used and installation environment.
Performance Characteristics
Dimming Characteristics
Dimming Interface Operation Notes
Switch-Dim
The provided Switch-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switches. Up to 64 LED drivers maybe connected to one switch. Detailed Push switch configurations can be set on Koolmesh app.
| Switch Function | Action | Descriptions |
| Push switch | Short press (<1 second) * Short press has to be longer than 0.1s, or it will be invalid. |
– Turn on/off – Recall a scene – Turn on only – Exit manual mode – Turn off only – Do nothing |
| Double push | – Turn on only – Exit manual mode – Turn off only – Do nothing – Recall a scene |
|
| Long press (1 second) | – Dimming – Colour tuning – Do nothing |
|
| Simulate sensor | / | – Upgrade a normal on/off motion sensor to a Bluetooth controlled motion sensor |
Additional Information/Documents
- Regarding precautions for LED driver installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->LED Drivers – Precautions for Product Installation and Operation
- To learn more about detailed product features/functions, please refer to www.hytronik.com/download->knowledge ->Introduction of App Scenes and Product Functions
- Regarding precautions for Bluetooth product installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->Bluetooth Products – Precautions for Product Installation and Operation
- Data sheet is subject to change without notice. Please always refer to the most recent release on www.hytronik.com/products/bluetooth technology ->Bluetooth Drivers
- Regarding Hytronik standard guarantee policy, please refer to www.hytronik.com/download ->knowledge ->Hytronik Standard Guarantee Policy
Subject to change without notice.
Documents / Resources
 |
HYTRONIK HED6045/BT Bluetooth Dimmable LED Drivers with Bluetooth 5.0 SIG Mesh [pdf] Owner's Manual HED6045-BT, HED6045 BT, LED Drivers with Bluetooth 5.0 SIG Mesh, HED6045 BT LED Drivers with Bluetooth 5.0 SIG Mesh, HED6045 BT LED Drivers, LED Drivers, Drivers, HED6045 BT Bluetooth Dimmable LED Drivers with Bluetooth 5.0 SIG Mesh, HED6045 BT Bluetooth Dimmable LED Drivers, Bluetooth Dimmable LED Drivers, Dimmable LED Drivers |