HYTRONIK logo

HYTRONIK Bluetooth Receiver Node – 150VA Trailing Edge Version HBTD8200T/F

HYTRONIK Bluetooth Receiver Node - 150VA Trailing Edge Version HBTD8200T-f

Technical Specifications

HYTRONIK Bluetooth Receiver Node - 150VA Trailing Edge Version HBTD8200T-F fig5

Download the App

Free App for set-up and commissioningHYTRONIK Bluetooth Receiver Node - 150VA Trailing Edge Version HBTD8200T-F fig1

Dimming Interface Operation Notes

Switch-Dim
The provided Switch-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switches. Detailed Push switch configurations can be set on Koolmesh app.

Switch FunctionActionDescriptions
Push switchShort press (<1 second)

* Short press has to be longer than 0.1s, or it will be invalid.

– Turn on/off – Recall a scene

– Turn on only – Exit manual mode

– Turn off only – Do nothing

 

Double push

– Turn on only – Exit manual mode

– Turn off only – Do nothing

– Recall a scene

 

Long press (≥1 second)

– Dimming

– Colour tuning

– Do nothing

Simulate sensor/– Upgrade a normal on/off motion sensor to a Bluetooth controlled motion sensor

Installation

Warnings:

  1. Installation must be carried out by a qualified engineer in accordance with local regulations.
  2. Disconnect power supply before installing.
  3. Ensure environmental conditions are suitable for electronic equipment.

HYTRONIK Bluetooth Receiver Node - 150VA Trailing Edge Version HBTD8200T-F fig2Wire PreparationHYTRONIK Bluetooth Receiver Node - 150VA Trailing Edge Version HBTD8200T-F fig3

Wiring Diagram

HYTRONIK Bluetooth Receiver Node - 150VA Trailing Edge Version HBTD8200T-F fig4

Additional Information / Documents

  1. To learn more about detailed product features/functions, please refer to www.hytronik.com/download ->knowledge ->Introduction of App Scenes and Product Functions
  2. Regarding precautions for Bluetooth product installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->Bluetooth Products – Precautions for Product Installation and Operation
  3. Data sheet is subject to change without notice. Please always refer to the most recent release on www.hytronik.com/products/bluetooth technology ->Bluetooth Sensor ->Receiver Nodes
  4. Regarding Hytronik standard guarantee policy, please refer to www.hytronik.com/download ->knowledge ->Hytronik Standard Guarantee Policy

Documents / Resources

HYTRONIK Bluetooth Receiver Node - 150VA Trailing Edge Version HBTD8200T/F [pdf] User Manual
HYTRONIK, Bluetooth, Receiver Node, 150VA, Trailing, Edge Version, HBTD8200T, HBTD8200F

References

Leave a comment

Your email address will not be published. Required fields are marked *