HyperX HX-MC005B Pulsefire Raid Mouse
Overview
A. Left click button
B. Right click button
C. Wheel tilt left/right* – Previous/Next Track
D. DPI button
E. Button 5 – Forward click
F. Button 4 – Backward click
G. Button 8* – Mute
H. Button 7* – Increase volume
I. Button 6* – Decrease volume
J. Mouse skates
K. Optical gaming sensor
Specifications
- Shape: Ergonomic
- Sensor: Pixart PMW3389
- Resolution: Up to 16,000 DPI
- DPI presets: 800 / 1600 / 3200 DPI
- Speed: 450 IPS
- Acceleration: 50G
- Buttons: 11
- Left / Right buttons switches: Omron
- Left / Right buttons durability: 20 million clicks
- Backlight: RGB (16,777,216 colors)
- Light effects: 2 RGB lighting zones
- Onboard memory: 1 profile
- Connection type: USB 2.0
- Polling rate: 1000Hz
- Cable type: Braided
- Dimensions (L x W x H): 127.8mm x 71.0mm x 41.5mm
- Cable length: 1.8m
- Weight (without cable)1: Approximately 95g
- Weight (with cable): Approximately 125g
- Software: HyperX NGENUITY
Please see our Support Page for more information regarding the weight.
Installation
Connect the USB connector to the computer.
Function Keys
|
Function Keys |
Secondary Feature |
|
DPI button |
Change between DPI presets. Default values are:
|
HyperX NGENUITY Software
To customize lighting, DPI, and macro settings, download the HyperX NGENUITY Software here:
hyperxgaming.com/ngenuity.
Using with Console
Connect the USB connector to PS4 or Xbox One to use with console.
Factory Reset
If you are experiencing any issue with the mouse, you can perform a factory reset. Onboard memory will be cleared, and all settings will revert back to default.
|
Function Keys |
Secondary Feature |
| Hold DPI button + mouse wheel button down for 5 seconds |
Perform a factory reset on the mouse. |
Questions or Setup Issues?
Contact the HyperX support team at: hyperxgaming.com/support/
Documents / Resources
 |
HyperX HX-MC005B Pulsefire Raid Mouse [pdf] User Manual HX-MC005B Pulsefire Raid Mouse, HX-MC005B, Pulsefire Raid Mouse, Mouse |
