HYPERX HX-HSCA-RD/AM Series Cloud Alpha Headset User Manual

To connect the detachable headset cable:
Locate the end with the headphone icon label and plug the cable into the female jack on the left headset ear cup. Both the plug and ear cup female jack are grey for easy identification.

To connect the detachable microphone:
Plug the microphone into the female microphone jack on the ear cup and push until it sits flush.

In-line Audio Control Operation
The in-line audio control contains a volume wheel to adjust the headphone output volume and a microphone mute slider to mute the microphone.

To mute/activate the microphone:
Slide the microphone mute button to the down position to mute and up position to activate.

Usage (PC)

To connect to a computer:
Connect the headset’s 3.5mm plug to the female jack on the PC extension cable. The audio plug with green stripes goes to the green input and the microphone plug with pink stripes goes to the pink input.

Usage (PlayStation TM 4)

To use with PS4TM:
Connect the 3.5mm plug on the headset directly to the PS4TM game controller.

HyperX Cloud Alpha Headset
Find the language and latest documentation for your HyperX Cloud Alpha Headset here.

HyperX Cloud Alpha Headset Installation Guide

Part Numbers:

HX-HSCA-RD/AM

HX-HSCA-RD/AS
HX-HSCA-RD/EE

HX-HSCA-RD/EM

Introduction
HyperXTM Cloud Alpha’s ground-breaking Dual Chamber Drivers design gives audio more distinction and clarity by reducing distortion. The dual chambers separate the bass for cleaner, smoother sound. Cloud Alpha has premium red memory foam, an expanded headband and softer, more pliable leatherette, an aluminium frame, detachable braided cable and noise-cancellation microphone. Multi-platform compatible with in-line audio controls on PC, PS4™, Xbox One™ and other platforms with 3.5mm ports.

What’s included:

HyperX Cloud Alpha Headset

Detachable microphone
Detachable headset cable

PC extension cable
Carry bag

Features:

HyperX dual chamber drivers

Signature award-winning HyperX comfort
Durable aluminium frame with expanded headband
Detachable braided cable with convenient in-line audio control
Detachable noise-cancellation microphone
Discord and TeamSpeakTM Certified
Multi-platform compatibility

Technical Specifications

Headphone:

Driver: Custom dynamic, 50mm with neodymium magnets
Type: Circumaural, closed back
Frequency response: 13Hz–27,000 Hz
Impedance: 65 Ω
Sound pressure level: 98dBSPL/mW at 1kHz
THD: < 1%
Weight: 298g
Weight w/ mic: 336g
Cable length and type: Detachable headset (1.3m) + PC extension cable (2m)
Connection: Detachable headset – 3.5mm plug (4 pole) + PC extension cable – 3.5mm stereo and mic plugs

Microphone:

Element: Electret condenser microphone
Polar pattern: Noise-cancelling

Frequency response: 50Hz-18,000 Hz
Sensitivity: -43dBV (0dB=1V/Pa,1kHz)

Overview

A. Headband adjustment slider

B. Detachable noise cancellation mic
C. Detachable headset cable
D. In-line audio control

E. PC extension cable with 3.5mm stereo and mic plugs

Setup

The headset features a detachable cable and detachable microphone.
To connect the detachable headset cable, locate the end with the headphone icon label and plug the cable into the female jack on the left headset ear cup. The plug and ear cup female jack both have a grey colour for easy identification.
To connect the detachable microphone, plug the microphone into the female microphone jack on the ear cup and push until the microphone sits flush.

In-line audio control operation

The in-line audio control contains a volume wheel to adjust the headphone output volume and a microphone mute slider to mute the microphone.

To increase the headset volume, rotate the volume wheel clockwise (towards the + sign). To reduce the volume, rotate the volume wheel anticlockwise (towards the – sign).
To mute the microphone, slide the microphone mute button to the down position. To activate the microphone, slide the microphone mute button to the up position.

Usage (PC)

To connect the headset to your computer (or other device) that has both a headphone jack and a microphone jack, connect the headset’s 3.5mm plug to the female jack on the PC extension cable. The PC extension cable has two 3.5mm
jacks. The audio plug, which has green stripes, plugs into the port signified by a green input or headphone symbol . The microphone plug, which has pink stripes, plugs into the port signified by a pink input or a microphone symbol .

Usage (PlayStation™ 4)
To use the headset with a PlayStation™ 4 (PS4™), connect the 3.5mm plug on the headset directly to the PS4™ game controller and follow these steps:

Turn on your PS4™ game console.
Navigate to the ‘Settings’ Menu and select it.

Highlight the ‘Devices’ menu option and select it.
Scroll down to ‘Audio Devices’ and select it.
Choose ‘Output to Headphones’ and select ‘All Audio’’.

Usage (Xbox One™)

To use the headset with an Xbox One™, connect the 3.5mm plug on the headset directly to the 3.5mm jack on the Xbox™ One controller

If your Xbox One™ controller does not have a 3.5mm jack, you will need the Xbox One™ Stereo Headset adapter (sold separately) that plugs into the Xbox One™ controller (pictured below).

Usage (mobile device)
To use the headset with a mobile device (or other device) with a headset jack (4 pole CTIA), connect the 3.5mm plug directly into the headset jack on your device.

Downloaded from thelostmanual.org

FAQS

Q: Can I use the HyperX Cloud Alpha Headset with Xbox OneTM?
A: Yes, the headset is multi-platform compatible, including Xbox OneTM, with a 3.5mm port.

Q: How do I adjust the headband on the Cloud Alpha Headset?
A: The headband adjustment slider allows you to customize the fit of the headset for your comfort.

Documents / Resources

HYPERX HX-HSCA-RD/AM Series Cloud Alpha Headset [pdf] User Manual
HX-HSCA-RD-AM, HX-HSCA-RD-AS, HX-HSCA-RD-EE, HX-HSCA-RD-EM, HX-HSCA-RDAM Series Cloud Alpha Headset, HX-HSCA-RDAM Series, Cloud Alpha Headset, Alpha Headset

References

User Manual

Leave a comment

Cancel reply