Hyperice Hypervolt Go 2 Massage Gun
Specifications
- Product Name: Hypervolt Go 2
- Head Attachment: Included
- Battery Level Indicator: LED band
- Speed Settings: 3 levels (1-3)
- Charging Port: Hyperice USB-C
- Charging Time: Up to 4 hours for a full charge
Product Usage Instructions
Getting Started
Download the Hyperice App and register your device at hyperice.com/register-product.
Charging
Plug in your Hypervolt Go 2 using the provided Hyperice USB-C until fully charged. The battery may take up to four hours to charge completely.
Choosing Head Attachments
Select your desired head attachment and firmly insert it into the opening.
Powering Up
To turn on your device, press and hold the power/speed setting button for two seconds until the battery level indicator illuminates. Release the button to power on.
Adjusting Speeds
Press the power/speed setting button to cycle through the speed settings (1-3). The white lights on the back will indicate the current speed level.
Recharging
A full charge is indicated by a green and fully illuminated LED light band on the handle. Only use the provided Hyperice charger for recharging.
Caring for Your Device
Ensure the power is off and the charger is disconnected before cleaning. Use a damp, clean cloth to wipe the device gently. Store it in a clean, cool, dry place away from direct sunlight when not in use.
Important Note
Please read the Operating Instructions before first use for additional details.
Frequently Asked Questions (FAQ)
- Q: How do I know when my Hypervolt Go 2 is fully charged?
A: A full charge is indicated when the LED light band on the handle remains green and fully illuminated. - Q: Can I use any charger to recharge my Hypervolt Go 2?
A: No, only use the provided Hyperice charger to recharge your device. - Q: How should I clean my Hypervolt Go 2?
A: Ensure the power is off and wipe the device gently with a damp, clean cloth.
Meet your new Hypervolt Go 2
Side view
Rear view
Before you start
Download the Hyperice App
Get the most out of your Hypervolt Go 2, or any Hyperice device with the Hyperice App. Follow along to guided routines, track your progress, and get tips and tricks from the world’s best pros.
Register your device
Activate your warranty and ensure easy returns, repairs, or refunds at hyperice.com/register-product.
Charge your new Hypervolt Go 2
Plug in your new Hypervolt Go 2 with the provided Hyperice USB-C until fully charged. The battery will take up to four hours to full charge.
Start your session
Choosing head attachments
Choose desired head attachment and insert directly into the opening while pushing firmly.
Powering up
Turn your Hypervolt Go 2 ON by pressing the power/speed setting button. Hold for two seconds until the battery level indicator (LED band) illuminates, then release.
Adjusting speeds
Choose your desired speed (1-3) by pressing the power/speed setting button once per speed. The white lights on the back will indicate the current speed.
Recharging
Full charge is indicated when the LED light band on the handle remains green and fully illuminated. Only use the provided Hyperice charger.
Caring for your Hypervolt Go 2
Make sure the power is OFF and the battery charger is not attached. Use a damp, clean cloth to gently wipe your device. Store in a clean, cool, dry place, out of direct sunlight, when not in use.
We’re here for you
HyperCare®
Get award-winning support from our HyperCare team – a group of specialists dedicated to your overall well-being and expert guidance on Hyperice products.
- 1.855.734.7224
- hyperice.com
- customersupport@hyperice.com
If outside of the United States, please visit hyperice.com/contact
Documents / Resources
![]() |
Hyperice Hypervolt Go 2 Massage Gun [pdf] User Guide Hypervolt Go 2 Massage Gun, Go 2 Massage Gun, Gun |
![]() |
Hyperice Hypervolt Go 2 Massage Gun [pdf] Instruction Manual Hypervolt Go 2 Massage Gun, Hypervolt Go 2, Massage Gun, Gun |