HYDC SCT016S 50A Split Core Current Transformer

Specifications

• Model: SCT016S
• Input Current: 50A – 200A
• Output: 100mA
• Turns Ratio: 1100 – 14000
• Load Resistance: 5 – 10
• Accuracy: 0.5% – 1%
• Linearity: 1%
• Weight: 85g

OVERVIEW

Ф16mmAperture Split core current transformer

Characteristic

• Safety lock buckle, easy to install
• Built-in over-voltage protection device (TVS tube)
• Lead type output and length can be customized
• Suspended type

Product application

• Portable instrument
• Household metering
• Monitor motor load

Product advantage

• Small volume, lightweight
• Low cost
• High turns, high precision

Installation diagram

Primary threading method（Firing line）

Typical technical index

• Material of core——Silicon steel sheet
• Working voltage——Phase voltage≤720V
• Working temperature——-25℃～+60℃
• Storage temperature——-30℃～+90℃
• Frequency range——50Hz～60Hz
• Dielectric strength——Input（bare conductor）/output AC 800V/1min 5mA 50Hz Output/Outer shell AC 3.5KV/1min 5mA 50Hz

Electrical parameters:（ The following parameters are typical values and actual values will be subject to product testing）
			Max. continuous input current: 120% of rated input
Model	Input current			Output	Turns ratio	Load resistance	Accuracy	Linearity		Weight
SCT016S		50A		100mA 100mA	1：100	5Ω	1%	1%		85g 85g
SCT016S		100A			1：1000	5Ω	0.5%/1%	1%
SCT016S		120A		40mA	1：3000	10Ω	0.5%/1%	1%		85g
SCT016S		150A		100mA	1：1500	10Ω	0.5%/1%	1%		85g
SCT016S		150A		50mA	1：3000	10Ω	0.5%/1%	1%		85g
SCT016S		160A		40mA	1：4000	10Ω	0.5%/1%	1%		85g
SCT016S		200A		100mA 50mA	1：2000	10Ω	0.5%/1%	1%		85g 85g
					1：4000	10Ω	0.5%/1%	1%
SCT016S	200A
Model	Input current			Output	Turns ratio	Power	Accuracy	Linearity		Weight
SCT016S		60A		1A 1A	1:60	0.1VA	1%	1%		85g 85g
SCT016S		80A			1:80	0.1VA	1%	1%
SCT016S	100A			1A	1:100	0.1VA	1%	1%		85g
Model	Input current			Output	Turns ratio	Load resistance	Accuracy	Linearity		Weight
SCT016S		50A		0.333V 0.333V	–	built-in	0.5%/1%	1%		85g 85g
SCT016S		100A			–	built-in	0.5%/1%	1%
SCT016S	150A			0.333V	–	built-in	0.5%/1%	1%		85g

Can be customized parameters/lead length/lead specifications according to user requirements.

Wiring schematic diagram

• Built-in sampling resistance Voltage output type,
• Secondary doesn’t allow short circuit

TVS: Transient voltage suppressor Current output type,
Secondary doesn’t allow open circuit

Cable (AWG22)
Specifications of lead wire: 20.3mm black and white twisted pair: (1AOutput: 0.75mm black and white twisted pair)

• The length of lead wire: 50cm
• Color of lead wire: white, black

Outline size:  (in: mm)

www.poweruc.pl

FAQ

• Can the parameters of the current transformer be customized?
  • Yes, parameters such as lead length and specifications can be customized according to user requirements.
• What is the maximum continuous input current supported by the SCT016S?
  • The maximum continuous input current supported is 120% of the rated input for optimal performance.

Documents / Resources

HYDC SCT016S 50A Split Core Current Transformer [pdf] User Guide SCT016S 50A Split Core Current Transformer, SCT016S 50A, Split Core Current Transformer, Core Current Transformer, Current Transformer, Transformer

References

• User Manual