YHDC logoSCT016S
Ф16mmAperture Split core current transformer

SCT016S Split Core Current Transformer

YHDC SCT016S Split Core Current Transformer - Front Front view
YHDC SCT016S Split Core Current Transformer - Opening Opening view
YHDC SCT016S Split Core Current Transformer - Bottom Bottom view

Characteristic

  • Safety lock buckle, easy to install
  • Built-in over-voltage protection device (TVS tube)
  • Lead type output, length can be customized
  • Suspended type

Product application

  • Portable instrument
  • Household metering
  • Monitor motor load

Product advantage

  • Small volume,Light weight
  • Low cost
  • High turns,High precision

Installation diagram

Primary threading method(Firing line)

YHDC SCT016S Split Core Current Transformer - diagram 1.Open the buckle
YHDC SCT016S Split Core Current Transformer - diagram 1 2.Open upward
YHDC SCT016S Split Core Current Transformer - diagram 2 3.Put in lead wire
YHDC SCT016S Split Core Current Transformer - diagram 3 4.Fasten the buckle

Typical technical index:

  • Material of core——Silicon steel sheet
  • Working voltage——Phase voltage≤720V
  • Working temperature——-25℃~+60℃
  • Storage temperature——-30℃~+90℃
  • Frequency range——50Hz~60Hz
  • Dielectric strength——Input(bare conductor)/output AC 800V/1min 5mA 50Hz

Output/Outer shell AC 3.5KV/1min 5mA 50Hz
Electrical parameters:(The following parameters are typical values and actual values will be subject to product testing)
Max. continuous input current: 120% of rated input

Model Input current Output Turns ratio Load resistance Accuracy Linearity Weight
SCT016S 50A 100mA 1:100 1% 1% 85g
SCT016S 100A 100mA 1:1000 0.5%/1% 1% 85g
SCT016S 120A 40mA 1:3000 10Ω 0.5%/1% 1% 85g
SCT016S 150A 100mA 1:1500 10Ω 0.5%/1% 1% 85g
SCT016S 150A 50mA 1:3000 10Ω 0.5%/1% 1% 85g
SCT016S 160A 40mA 1:4000 10Ω 0.5%/1% 1% 85g
SCT016S 200A 100mA 1:2000 10Ω 0.5%/1% 1% 85g
SCT016S 200A 50mA 1:4000 10Ω 0.5%/1% 1% 85g
Model Input current Output Turns ratio Power Accuracy Linearity Weight
SCT016S 60A 1A 1:60      0.1VA 1% 1% 85g
SCT016S 80A 1A 1:80      0.1VA 1% 1% 85g
SCT016S 100A 1A 1:100      0.1VA 1% 1% 85g
Model Input current Output Turns ratio Load resistance Accuracy Linearity Weight
SCT016S 50A 0.333V built-in 0.5%/1% 1% 85g
SCT016S 100A 0.333V built-in 0.5%/1% 1% 85g
SCT016S 150A 0.333V built-in 0.5%/1% 1% 85g

*Can be customized parameters/lead length/lead specifications according to user requirements.
Wiring schematic diagram:

YHDC SCT016S Split Core Current Transformer - Wiring Built-in sampling resistance Voltage output type Secondary doesn’t allow short circuit
YHDC SCT016S Split Core Current Transformer - Wiring 1 TVS:Transient voltage suppressor Current output type Secondary doesn’t allow open circuit

Cable(AWG22):
Specifications of lead wire:0.3mm black and white twisted pair (1AOutput:0.75mm black and white twisted pair)
The length of lead wire:50cm
Color of lead wire:white,black
Outline size: (in:mm):YHDC SCT016S Split Core Current Transformer - Outline

www.poweruc.pl

Documents / Resources

YHDC SCT016S Split Core Current Transformer [pdf] Instruction Manual
SCT016S, SCT016S Split Core Current Transformer, Split Core Current Transformer, Core Current Transformer, Current Transformer, Transformer

References

Leave a comment

Your email address will not be published. Required fields are marked *